STORM AND SEASONAL DISTRIBUTIONS OF FECAL COLIFORMS AND CRYPTOSPORIDIUM IN A SPRING1

ABSTRACT: The transmission of disease in ground water is a topic of great concern to government agencies, ground water specialists, and the general public. The purpose of this study was to compare the temporal variability in storm flow of fecal coliform bacteria densities and Cryptosporidium parvum oocyst densities in agriculturally impacted karst ground water. Cryptosporidium parvum oocyst densities ranged from 0 to 1,050 oocysts/1, and mean storm densities ranged from 3.5 to 156.8 oocysts/1. Fecal coliform densities ranged from less than 1 CFU/100ml to more than 40,000 CFU/100ml, and geometric mean storm densities ranged from 1.7 CFU/100ml to more than 7,000 CFU/100ml. Fecal coliform densities correlated well with flow during storms, but Cryptosporidium oocyst densities exhibited a great deal of sample to sample variability and were not correlated with flow. Fecal coliform densities did not correlate positively with Cryptosporidium oocyst densities. Fecal coliform densities were greatest at storm peaks, when sediment loads were also greatest. Multiple transport mechanisms for fecal coliform bacteria and C. parvum oocysts may necessitate various agricultural land management and livestock health maintenance practices to control movement of pathogens to karst ground water.     

Sorption and degradation characteristics of phosmet in two contrasting Australian soils

The organophosphate insecticide phosmet [phosphorodithioic acid, s-((1,3-dihydro-1,3-dioxo-2H-isoindol-2yl)methyl), o,o-dimethyl ester] is used to control red-legged earth mites (Halotydeus destructor), lucerne flea (Sminthurus viridis), and Oriental fruit moth (Cydia molesta) in horticulture and vegetable growing. This study was undertaken with two soils of contrasting properties to determine the extent to which sorption and degradation of the insecticide might influence its potential to leach from soil into receiving waters. Two soils were used: a highly organic, oxidic clay soil (Ferrosol) and a sandy soil low in organic matter (Podosol), sampled to 0.3 m depth. The extent of sorption and decomposition rate of a phosmet commercial formulation were measured in laboratory experiments. Sorption followed a Freundlich isotherm at all depths. The Freundlich coefficient K was significantly correlated (p = 0.005) with organic C content in the Podosol, and significantly correlated (p = 0.005) with organic C and clay content in the Ferrosol. K was highest (48.8 L kg-1) in the 0- to 0.05-m depth of the Ferrosol, but lowest (1.0 L kg-1) at this depth in the Podosol. Degradation followed first-order kinetics, with the phosmet half-life ranging from 14 h (0-0.05 m depth) to 187 h (0.2-0.3 m depth) in the Ferrosol. The half-life was much longer in the sandy Podosol, ranging from 462 to 866 h, and did not change significantly with depth. Soil organic C and to a lesser degree clay content influenced phosmet sorption and degradation, but the interaction was complex and possibly affected by co-solvents present in the commercial formulation.     

Climatic and agricultural contributions to changing loads in two watersheds in Ohio

Trends in climatic variables, streamflow, agricultural practices, and loads of nutrients and suspended solids were estimated for 1976-1995 in the Maumee and Sandusky watersheds, two large agricultural basins draining to Lake Erie. To understand the contributions that various factors may have made to the trends in loads, earlier results of models linking loads to explanatory variables were combined with estimated trends in those variables. The study period was characterized by increases in temperature, wintertime precipitation and streamflow, conservation farming, and loads of nitrate and total suspended solids; decreases in snowfall and snow cover, fertilizer, manure from livestock, and loads of soluble reactive phosphorus; and relatively steady exports of total phosphorus. After removing the effects of trends in streamflow, nitrate loads increased much less while total suspended solids and total phosphorus loads declined. The analysis suggests that the nitrate increases were due largely to climatic factors, particularly increases in winter streamflow, decreases in snowfall and snow cover, and declining annual precipitation. Decreases in soluble reactive phosphorus were associated with changes in agricultural practices, particularly declines in fertilizer deliveries and head of livestock.     

EFFECTS OF SUSPENDED SOLIDS ON THE ACUTE TOXICITY OF ZINC TO DAPHNIA MAGNA AND PIMEPHALES PROMELAS1

ABSTRACT: Current procedures for setting site-specific water quality criteria consider abiotic and biotic factors. Suspended solids were shown to be important in reducing zinc toxicity to water column organisms. At zinc concentrations of ～ 1 mg/L in solutions with < 100 mg/L of all suspended solids tested, zinc toxicity to D. magna was reduced. Sorption of zinc to suspended solids and/or changes in water chemistry due to the addition of suspended solids appear to have been the factors causing reductions in zinc toxicity to D. magna. Only suspended solids levels of 483–734 mg/L of a type that increased total alkalinity, total hardness, and total dissolved carbon clearly reduced the toxicity of ～ 20 mg/L zinc to P. promelas. The toxic form of zinc to these organisms appears to reside in the aqueous phase. Characteristics of suspended solids did not influence the partition coefficient of zinc in sorption experiments of 96 h. The slopes of dose-response curves proved to be useful for assessing the potential of an organism to respond to changes in aqueous phase zinc concentrations, and may be a useful biological parameter when considering site-specific water quality criteria for chemicals.     

Polycyclic aromatic hydrocarbon release from a soil matrix in the in vitro gastrointestinal tract

Soil ingestion is an important exposure route by which immobile soil contaminants enter the human body. We assessed polycyclic aromatic hydrocarbon (PAH) release from a contaminated soil, containing 49 mg PAH kg(-1), using a SHIME (Simulator of the Human Intestinal Microbial Ecosystem) reactor comprising the stomach, duodenal, and colon compartments. Polycyclic aromatic hydrocarbon release was defined as that fraction remaining in the digest supernatant after centrifugation for 5 min at 1500 x g. The PAH release in the stomach digest was only 0.44% of the total PAH present in soil, resulting in PAH concentrations of 23 micrograms PAH L(-1) chyme. The lower PAH releases in duodenum (0.13%) and colon (0.30%) digests, compared with the stomach digest, were thought to be attributed to combined complexation and precipitation with bile salts, dissolved organic matter, or colon microbiota. We studied these complexation processes in an intestinal suspension more in depth by preparing mixtures of 9-anthracenepropionic acid, a Bacillus subtilis culture, and cholin as model compounds for PAHs, organic matter, and bile salts, respectively. Bile salts or organic matter in the aqueous phase initially enhance PAH desorption from soil. However, desorbed PAHs may form large aggregates with bile and organic matter, lowering the freely dissolved PAH fraction in the supernatant. Using the model compounds, mathematical equations were developed and validated to predict PAH complexation processes in the gastrointestinal tract. Contaminant release and subsequent complexation in the gut is an important prerequisite to intestinal absorption and thus bioavailability of that contaminant. The data from this research may help in understanding the processes to which PAHs are subjected in the gastrointestinal tract, before intestinal absorption.     

A bioeconomic model for estimating the benefits of acid rain abatement to Salmon fishing: a case study in South West Scotland

The United Kingdom, under the Large Combustion Plant Directive of the European Community, is committed to cutting sulphur dioxide (SO2) emissions by 60% of 1980 levels by the year 2003. In order to justify this action and to support new decisions on further emission reductions, policy makers require knowledge of the economic benefits of abatement. Benefit estimates for the recovery of freshwater fish populations present difficulties since the effect of reduced acid deposition on environmental processes is complex and because fishery records are often inadequate or absent. This paper predicts the economic benefits of acid rain abatement to the rod and line salmon fishery of Galloway, South West Scotland. It achieves this by linking output on long term changes in water chemistry and fish population status from MAGIC, a process based catchment model for acidification, with catch and market value data. Predicted increases in the market value of the fishery are presented and the role of the model in economic analysis of environmental policy discussed.     

AN ECONOMIST'S VIEW OF DEMAND PROJECTIONS CONSIDERING CONSERVATION1

ABSTRACT: This report places the engineering estimates of water conservation made by Sonnen and Evenson into the supply demand form used by most economists. Clarification is made concerning evaluation of conservation elasticities.     

AN OBJECTWE TEST FOR HYDROLOGIC SCALE1

ABSTRACT: Improving the reliability of parametric hydrologic models (sometimes called cenceptual rainfall-runoff models) in the continuous simulation of runoff from ungaged catchments has been frustrated by difficulties in estimating model parameters from catchment characteristics. An underlying problem is that these models use parameters to represent catchments as a whole, whereas data on catchment characteristics are collected at multiple field locations and are difficult to transform into one measure of collective impact. Subdividing the catchment and calibrating a stochastic parametric model to estimate distributions for the parameters that covered the range of observed streamflow values was found to improve the simulations. This paper presents an optimization of the amount of subdivision to use in simulation with a version of the Stanford Watershed Model using available climatological data. The calibration process assumes that catchment heterogeneity introduces errors that can be reduced by calibrating parameters as spatial distributions rather than single values. Calibrations for three diverse small gaged catchments located in California and in Virginia found the optimal number of subdivisions to range from 4 to 25 and the optimal scale to range from 0.3 to 2.1 mi².     

River Habitat Quality from River Velocities Measured Using Acoustic Doppler Current Profiler

Prior research has demonstrated the utility of metrics based on spatial velocity gradients to characterize and describe stream habitat, with higher gradients generally indicative of higher levels of physical heterogeneity and thus habitat quality. However, detailed velocity data needed to compute these metrics are difficult to obtain. Acoustic Doppler current profilers (ADCP) may be used to rapidly collect detailed representations of river velocity fields. Herein we demonstrate use of ADCP to obtain ecologically relevant data and compute associated metrics. Data were collected from four reaches of the Little Tallahatchie River in northern Mississippi. Sampled reaches were selected to observe velocity regimes associated with three distinctly different conditions: downstream from a major flow obstruction (a low weir), downstream from the apices of each of two bends, and within an extremely long, straight reach created by channelization. Three-dimensional velocity data sets from each site were used to compute metrics of habitat quality proposed by others. A habitat metric based on the presence of rotational flow in the vertical plane proved to be the best discriminator among conditions within the sampled reaches. Two of four habitat quality metrics computed from these measured velocities were greatest for the sharpest meander bend. ADCP hold great potential for study of riverine physical aquatic habitats, particularly at the reach scale. Additional work is needed to develop generally applicable field protocols and data reduction tools. Specifically, guidelines for ADCP settings and configuration appropriate for a range of riverine site conditions must be developed. Advances in instrumentation are needed to allow collection of information in closer proximity to the free surface and solid boundaries.