Species composition and quantitative representation of fishes in biotopes with the riffle minnow <Emphasis Type="Italic">Alburnoides bipunctatus</Emphasis>

Species composition of fishes was studied in rivers (capture sites) inhabited by the riffle minnow. In some localities, this species proved to occupy a leading position in the ichthyofauna, being obviously dominant. In small rivers, 16 species were caught together with it, including seven species regularly occurring in catches. The relative abundance of riffle minnow showed a moderate positive correlation with that of the gudgeon (0.568) and a nonsignificant negative correlation (?0.399) with that of the bleak. It is probable that the population dynamics of riffle minnow are determined mainly by natural intraspecific mechanisms rather than by water quality, which has changed only slightly in the rivers studied.     

Reproductive parameters and disturbances of embryonic development in the fieldfare (<Emphasis Type="Italic">Turdus pilaris</Emphasis> L.) in the zone of impact from the nuclear fuel industry

The impact of emissions from the Siberian Chemical Plant (Tomsk oblast) on reproduction and embryonic development of the fieldfare was studied. Bird abundance, clutch size, and egg volume in the impact and background (control) zones were similar, but partial brood mortality in the impact zone proved to be significantly higher, and the frequency of embryonic pathologies (including developmental abnormalities) was also several times higher than in the control.     

Evaluating the role of environmental quality in the sustainable rural economic development of England

The issue of the sustainable development of rural economies in England has recently received considerable attention. This is because many of the poorest areas in the country are rural, often of high environmental quality, but suffering from high unemployment and a lack of services and facilities. The rapid decline in agricultural incomes and in-migration of affluent urban workers since 1990 has exacerbated economic inequality in such areas. A number of factors have the potential to drive rural development and this paper applies, and considers, the feasibility of a method from the USA for combining economic and environmental variables in a regional growth model to examine the hypothesis that environmental quality is an important determinant of sustainable rural development in England. The model output suggests that, although environmental quality does play a role in sustainable rural development in England there are other, more important, factors driving development. These include business and communications infra-structure, the degree and opportunities for commuting and underlying employment prospects. The robustness and limitations of the method for combining economic and environmental variables is discussed in relation to the spatial interrelatedness of Local Authority Districts in England, and conclusions are drawn about areas for refinement and improvement of the method.

A quantitative integrated assessment of pollution prevention achieved by Integrated Pollution Prevention Control licensing

This paper presents an innovative, quantitative assessment of pollution avoidance attributable to environmental regulation enforced through integrated licensing, using Ireland's pharmaceutical-manufacturing sector as a case study. Emissions data reported by pharmaceutical installations were aggregated into a pollution trend using an Environmental Emissions Index (EEI) based on Lifecycle Assessment methodologies. Complete sectoral emissions data from 2001 to 2007 were extrapolated back to 1995, based on available data. Production volume data were used to derive a sectoral production index, and determine ‘no-improvement’ emission trends, whilst questionnaire responses from 20 industry representatives were used to quantify the contribution of integrated licensing to emission avoidance relative to these trends. Between 2001 and 2007, there was a 40% absolute reduction in direct pollution from 27 core installations, and 45% pollution avoidance relative to hypothetical ‘no-improvement’ pollution. It was estimated that environmental regulation avoided 20% of ‘no-improvement’ pollution, in addition to 25% avoidance under business-as-usual. For specific emissions, avoidance ranged from 14% and 30 kt a^− 1 for CO₂ to 88% and 598 t a^− 1 for SO_x. Between 1995 and 2007, there was a 59% absolute reduction in direct pollution, and 76% pollution avoidance. Pollution avoidance was dominated by reductions in emissions of VOCs, SO_x and NO_x to air, and emissions of heavy metals to water. Pollution avoidance of 35% was attributed to integrated licensing, ranging from between 8% and 2.9 t a^− 1 for phosphorus emissions to water to 49% and 3143 t a^− 1 for SO_x emissions to air. Environmental regulation enforced through integrated licensing has been the major driver of substantial pollution avoidance achieved by Ireland's pharmaceutical sector — through emission limit values associated with Best Available Techniques, emissions monitoring and reporting requirements, and performance targets specified in environmental management plans. This compliant sector offers a positive, but not necessarily typical, case study of IPPC effectiveness.     

Brominated flame retardants and organochlorines in the European environment using great tit eggs as a biomonitoring tool

Large-scale studies are essential to assess the emission patterns and spatial distribution of organohalogenated pollutants (OHPs) in the environment. Bird eggs have several advantages compared to other environmental media which have previously been used to map the distribution of OHPs. In this study, large-scale geographical variation in the occurrence of OHPs, such as polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs), was investigated throughout Europe using eggs of a terrestrial residential passerine species, the great tit (Parus major). Great tit eggs from 22 sampling sites, involving urban, rural and remote areas, in 14 European countries were collected and analysed (5-8 eggs per sampling site). The environmentally most important congeners/compounds of the analysed pollutants were detectable in all sampling locations. For PCBs, PBDEs and OCPs, no clear geographical contamination pattern was found. Sum PCB levels ranged from 143 ng/g lipid weight (lw) to 3660 ng/g lw. As expected, PCB concentrations were significantly higher in the sampled urban compared to the remote locations. However, the urban locations did not show significantly higher concentrations compared to the rural locations. Sum PBDEs ranged from 4.0 ng/g lw to 136 ng/g lw. PBDEs were significantly higher in the urbanized sampling locations compared to the other locations. The significant, positive correlation between PCB and PBDE concentrations suggests similar spatial exposure and/or mechanisms of accumulation. Significantly higher levels of OCPs (sum OCPs ranging from 191 ng/g lw to 7830 ng/g lw) were detected in rural sampling locations. Contamination profiles of PCBs, PBDEs and OCPs differed also among the sampling locations, which may be due to local usage and contamination sources. The higher variance among sampling locations for the PCBs and OCPs, suggests that local contamination sources are more important for the PCBs and OCPs compared to the PBDEs. To our knowledge, this is the first study in which bird eggs were used as a monitoring tool for OHPs on such a large geographical scale.     

Review of Russian language studies on radionuclide behaviour in agricultural animals: 3. Transfer to muscle

Over 150 publications reporting studies conducted in the former USSR were reviewed to provide transfer coefficients (F_f) to the muscle of domestic animals from experiments using chronic administration, often for long timescales in large scale experiments. Only a few of these studies were made available in the English language literature or taken into account in international reviews. The values derived have been compared with expected values reported by the IAEA's Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS 364) where possible. The information presented here has been used in the current updating of parameters recommended for environmental assessments by the IAEA. Many of the reported values are for Sr due to the Mayak accident and Cs due to the Chernobyl accident. Nevertheless, the reported data for a wide range of radionuclides, in particular for Ru, Sb, and Zn markedly improve the extent of available data.     

Radionuclide transfer to animal products: revised recommended transfer coefficient values

A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as ‘TRS 364’. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 ‘expected’ values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.     

The role of interactions between individual animals in the response to heat stress in the freshwater crustacean <Emphasis Type="Italic">Daphnia magna</Emphasis>

The thermal resistance of Daphnia magna Straus is a trait depending on the interaction between individuals. The group effect is expressed in D. magna as both a decrease in thermal resistance and a marked individual differentiation with respect to thermal resistance. Two types of interactions between individual D. magna have been found: (1) the release of an unidentified factor decreasing thermal resistance (without noticeably changing the phenotypic variability of this trait) into the medium and (2) a decrease in the thermal resistance of individuals poorly adapted to heat stress, with the thermal resistance of well-adapted individuals (determined by the dependence of thermal resistance on interactions between individuals) remaining the same or even slightly increasing.Translated from Ekologiya, No. 2, 2005, pp. 126–131.Original Russian Text Copyright © 2005 by Kalinnikova, Krasnoperova, T. Gainutdinov, Sadykova, M. Gainutdinov.     

Estimation of the maximal population frequency of “alien” biotypes taking into account a priori data

A method is described for calculating the probability that the percentage of alien biotypes is higher than a specified threshold (e.g., 5%) in a population in which a certain number of alien biotypes has been found preliminarily. The method is based on the Bayesian approach; it assumes that the researcher has preliminary (a priori) information on the frequency of these biotypes. This a priori information makes it possible to estimate the aforementioned probability more accurately than is possible with the use of the standard binomial estimation. The method is illustrated by the results of the estimation of cultivar purity in batches of stock and foundation seeds of spring barley with the use of protein markers.Translated from Ekologiya, No. 2, 2005, pp. 106–109.Original Russian Text Copyright © 2005 by Zhivotovsky, Pomortsev, Lyalina, Kalabushkin, Pukhalskii.     

Identification of metal toxicity in sewage sludge leachate

Sewage sludge is a source of organic matter and nutrients with the potential for being used as a fertilizer. However, metals in sewage sludge might accumulate in soil after repeated sludge applications, and metal concentrations might reach concentrations that are toxic to microorganisms, soil organisms and/or plants. This toxicity might change with time due to kinetic factors or abiotic factors such as freezing, drying or rainfall. The objective of this study was to determine toxicity of sewage sludge leachate from a lysimeter with 50 cm of sludge applied. Attempts were also made to identify the cause of toxicity of the sludge leachate by toxicity identification and evaluation (TIE) techniques. Sludge leachate was collected monthly during 1 experimental year (August 2001 to August 2002). Metal concentrations were analysed, and the toxicity was determined with Daphnia magna (48-h immobility). The effect of EDTA or sodium thiosulphate addition, filtration through a CM-resin or a Millex-resin on toxicity was also tested. The results showed that toxicity of the sludge leachate apparently varied during the year, and that filtration through the CM-resin reduced most of the toxicity followed by the addition of EDTA. None of the other treatments reduced the toxicity of the sludge leachate. This indicated that one or more metals were responsible for the observed toxicity. Further calculations of toxic units (TU) suggested that Zn contributed most to the toxicity. Results also indicated that Ca concentrations in the sludge leachate reduced the toxicity of Zn.