A CFD study of the transport and fate of airborne droplets in a ventilated office: The role of droplet−droplet interactions

• Coulomb and Lennard−Jones forces were considered for droplet interactions. • The net droplet interactions were repulsive. • Repulsive droplet interactions increased the transport of droplets. • Repulsive droplet interactions significantly modified the fate of droplets. Previous studies reported that specially designed ventilation systems provide good air quality and safe environment by removing airborne droplets that contain viruses expelled by infected people. These water droplets can be stable in the environment and remain suspended in air for prolonged periods. Encounters between droplets may occur and droplet interactions should be considered. However, the previous studies focused on other physical phenomena (air flow, drag force, evaporation) for droplet transport and neglected droplet interactions. In this work, we used computational fluid dynamics (CFD) to simulate the transport and fate of airborne droplets expelled by an asymptomatic person and considered droplet interactions. Droplet drag with turbulence for prediction of transport and fate of droplets indicated that the turbulence increased the transport of 1 μm droplets, whereas it decreased the transport of 50 μm droplets. In contrast to only considering drag and turbulence, consideration of droplet interactions tended to increase both the transport and fate. Although the length scale of the office is much larger than the droplet sizes, the droplet interactions, which occurred at the initial stages of release when droplet separation distances were shorter, had a significant effect in droplet fate by considerably manipulating the final locations on surfaces where droplets adhered. Therefore, it is proposed that when an exact prediction of transport and fate is required, especially for high droplet concentrations, the effects of droplet interactions should not be ignored.     

An individual-based model to study the reproduction of egg bearing copepods: Application to Eurytemora affinis (Copepoda Calanoida) from the Seine estuary,France

Limited empirical studies have elucidated the daily egg production and associated reproductive processes of egg bearing copepod. Herein, we present an individual-based model which constitutes a realistic representation of the reproduction in egg bearing copepods. The model has been parameterized using an extensive set of experimental data obtained from the literature and from the laboratory and field experiments on the estuarine copepod Eurytemora affinis. The proposed model takes into account the adult female longevity, the clutch size and interclutch duration, which is a function of egg maturation time and latency time required by the female after egg hatching to produce a new clutch. The embryonic development time and hatching success are also taken into account. The effect of temperature on the means and variances of above-mentioned reproductive parameters has been also incorporated. A multi agent system based generic platform “Mobidyc” has been used to generate and calibrate the model. The model demonstrates the reproductive parameters of females of E. affinis which is validated through individual based experiments. Temperature specific simulations provide a dynamical explanation of temperature effect on the cumulative egg production. The daily survival principally affects the number of clutches produced per female during its life span. The results obtained in the present study by combining temperature and survival effects reveal the relatively greater importance of the first factor on the daily egg production of egg-carrying copepods. The present model is generic and hence easily applicable to other animals with comparable reproductive strategy.     

WATER QUALITY CONTROL BY ARTIFICIAL AERATION OF STREAM RECEIVING THERMAL AND ORGANIC WASTE DISCHARGES1

ABSTRACT: The purpose of this work is to study the installation of artificial aerators for water quality control of a stream which receives thermal and organic waste discharges. The location and numer of diffuser type aerators to be installed along the stream are determined so as to maintain the stream DO content above a certain minimum requirement (4 mg/l or 5 mg/l) for normal aquatic life. Effects of the stream velocity, upstream BOD concentration and rates of thermal and organic waste discharges to the stream are examined.     

Geochemical Characteristics of the Acid Mine Drainage in the Water System in the Vicinity of the Dogye Coal Mine in Korea

This study investigated geochemical characteristics of the acid mine drainage (AMD) discharged from the abandoned mine adits in the vicinity of the Dogye coal mine in Korea. Acid mine drainage discharged from Jeoncha pit adit of the Dogye coal mine, which is the main source of the AMD in the study area, had a pH value of 3.0 and concentrations of 2148mg SO₄ ^2– L^–1, 229mg Fe L^–1, 71mg A1 L^–1 and 11mg Mn L^–1. The reduction of some metal concentrations downstream from the discharge point could be explained on the basis of dilution and precipitation. The order of removal of metal ions downstream from the discharge point was Fe>A1, Cu>Zn, Mn. Acidity could be used as a good determining factor offering comprehensive and quantitative values for the polluting extent of acid mine drainage. The acidities existing in all acidic water samples in the Gunahan district originated primarily from mineral acidity, especially in the upper Nahan Creek from dissolved Fe and Al and in the middle and down Nahan Creek from dissolved Al. From the application of the WATEQ4F program, it was determined that predominant species of dissolved Fe in all water samples was Fe²⁺, and those of dissolved Al were AlSO₄ ⁺ and Al³⁺ except for IW2 sample which was associated with white precipitates. The species of dissolved Al in IW2 sample include also AlOH²⁺ and Al(OH)₂ ⁺. The saturation indices of goethite and haematite were positive in the water samples associated with ochrous precipitates (usually called Yellow Boy), therefore these solids might be precipitated. For the IW2 sample, the saturation indices of amorphous Al(OH)₃ and gibbsite were positive, so theoretically these solids might also be precipitated. By XRD analysis, it was found that goethite occurs in ochrous precipitates, and gibbsite in white precipitates.     

Evaluation of food waste disposal options by LCC analysis from the perspective of global warming: Jungnang case, South Korea

The costs associated with eight food waste disposal options, dry feeding, wet feeding, composting, anaerobic digestion, co-digestion with sewage sludge, food waste disposer, incineration, and landfilling, were evaluated in the perspective of global warming and energy and/or resource recovery. An expanded system boundary was employed to compare by-products. Life cycle cost was analyzed through the entire disposal process, which included discharge, separate collection, transportation, treatment, and final disposal stages, all of which were included in the system boundary. Costs and benefits were estimated by an avoided impact. Environmental benefits of each system per 1 tonne of food waste management were estimated using carbon prices resulting from CO(2) reduction by avoided impact, as well as the prices of by-products such as animal feed, compost, and electricity. We found that the cost of landfilling was the lowest, followed by co-digestion. The benefits of wet feeding systems were the highest and landfilling the lowest.     

ON TAXATION AND FIRMS CHOICE OF WASTE WATER TREATMENT TECHNOLOGY1

ABSTRACT: The interaction between the level of taxation and the firms accruing choice of treatment technology is discussed. It is shown that there is a risk of overtaxation, that is, simply increasing taxation may fail to improve environmental quality but only increase production costs and thus consumer prices.     

Characterization of the monthly variation in (1 → 3)-β-d-glucan concentrations in university laboratories

We characterize the monthly variation in (1 → 3)-β-d-glucan concentration measured over the course of 1 year, and we evaluate the characteristics of size selection using a two-stage cyclone sampler. The (1 → 3)-β-d-glucan concentrations were measured in four bio-related laboratories. A total of 156 samples were collected using a new two-stage cyclone sampler. Analysis of (1 → 3)-β-d-glucan was performed using the kinetic Limulus amebocyte lysate assay. The study showed that airborne (1 → 3)-β-d-glucan concentrations were significantly higher in laboratory D (mean ± SD 1,105?±?1,893 pg/m³) and in the spring (5,458 pg/m³). The highest concentration of (1 → 3)-β-d-glucan occurred in the spring, particularly in May.     

Effects of sedimentation on the gorgonian <Emphasis Type="Italic">Subergorgia suberosa</Emphasis> (Pallas, 1766)

Effects of oceanic and terrestrial sediment suspensions on the behavioral traits activity, colony expansion, and mucus formation of the gorgonian octocoral Subergorgia suberosa (Pallas, 1766) were studied in the laboratory. Increased sediment concentration significantly changed the logits of activity indices (as colony expansion) and was correlated with decreased activity. For both sources of sediments, the activity index decreased as the concentration of sediment increased. The level of decrease was more significance for terrestrial sediments. The activity index showed no clear time pattern for the control group, but a decrease over time occurred in both sediment treatment groups. Activity change was linearly correlated with exposure time and concentration of terrestrial and ocean sediments. The activity indices of polyps were negatively correlated with the formation of mucus sheets (correlation = −0.536, p = 0.048). For both sources of sediments, the frequency of mucus sheet formation (MSF) increased with sediment concentration. Increases in terrestrial sediment loads resulted in more striking effects. The probability for MSF under different sediment groups at different concentrations over time was modeled by regressions. Frequency of polyp activity is suggested as a suitable biomarker to monitor the effects of sedimentation stress.     

NOx emission calculations for bulk carriers by using engine power probabilities as weighting factors

An important marine pollution issue identified by the International Maritime Organization (IMO) is NO_x emissions; however, the stipulated method for determining the NO_x certification value does not reflect the actual high emission factors of slow-speed two-stroke diesel engines over long-term slow steaming. In this study, an accurate method is presented for calculating the NO_x emission factors and total amount of NO_x emissions by using the actual power probabilities of the diesel engines in four types of bulk carriers. The proposed method is suitable for all types and purposes of diesel engines, is not restricted to any operating modes, and is highly accurate. Moreover, it is recommended that the IMO-stipulated certification value calculation method be modified accordingly to genuinely reduce the amount of NO_x emissions. The successful achievement of this level of reduction will help improve the air quality, especially in coastal and port areas, and the health of local residents.

Implications: As per the IMO, the NO_x emission certification value of marine diesel engines having a rated power over 130 kW must be obtained using specified weighting factor (WF)-based calculation. However, this calculation fails to represent the current actual situation. Effective emission reductions of 6.91% (at sea) and 31.9% (in ports) were achieved using a mathematical model of power probability functions. Thus, we strongly recommend amending the certification value of NO_x Technical Code 2008 (NTC 2008) by removing the WF constraints, such that the NO_x emissions of diesel engines is lower than the Tier-limits at any load level to obtain genuine NO_x emission reductions.     

Effects of cyanobacterium Microcystis aeruginosa on the filtration rate and mortality of the freshwater bivalve Corbicula leana

We compared filtering rates (FR) and mortalities between freshwater filter-feeding bivalve Corbicula leana acclimatized (AM) and non-acclimatized (NAM) to an cyanobacterial bloom (mainly Microcystis aeruginosa) over seven days. Both mussel populations were simultaneously stocked into mesocosms constructed in littoral zones of a eutrophic lake at a density of 740 ind. m(-2) for 16 days. NAMs decreased the concentration of chlorophyll-a 50% less than AMs. For the first seven days, the FRs (0.46-0.61) and mortality rate (slope = -30.2, r = -0.95) of NAMs were higher than those of AMs, possibly due to a sudden increase in unselective filtering. From the eighth day NAM mortality decreased rapidly and then stabilized, becoming similar to that of AMs through the end of the experiment. Stocking both AMs and NAMs increased the NH4-N concentration in the water, and the mortality rates of both mussel populations were correlated with NH4-N. In contrast, other nutrients and microcystin concentrations were not significantly associated with mussel mortality. These results indicate that although a sudden introduction of non-acclimatized C. leana may partially control phytoplankton biomass fora short period, previous short-term acclimatization is needed to minimize mussel mortality.