A comparison of results from two test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum

Two different test methods for assessing the toxicity of aminotriazole to Selenastrum capricornutum are compared. Growth medium composition is demonstrated to have a significant effect on the toxicity of aminotriazole.     

Buffer zone widths for honeybees from ground and aerial spraying of insecticides

The relative field hazards of insecticides to honeybees have been estimated by considering intrinsic toxicity levels and field application rates. This approach is extended here to a consideration of buffer zones downwind of sprayed areas by estimating the distance at which bees would encounter an LD(50) dose from spray drift. 'LD(50) distances' are determined for both ground and aerial spraying of ground crops in Britain using published data on spray deposition under various weather conditions. For ground spraying at low wind speeds (< or =3 m s(-1)), this zone of risk is up to 5 m for the great majority of compounds. Aerial spraying in unstable atmospheric conditions appears to produce drift deposits of about the same order of magnitude as from ground spraying at wind speeds of about 4 m s(-1), with maximum LD(50) distances of < or =40 m for chlorpyrifos, fenitrothion and triazophos. For aerial spraying in stable atmospheric conditions these distances would be much greater. Pieris brassicae larvae are contrasted with honeybees in their relative sensitivities to insecticides and consequent LD(50) distances.     

Trace elements in soil and biota in confined disposal facilities for dredged material

We studied the relation of trace element concentrations in soil to those in house mice (Mus musculus), common reed (Phragmites australis) and ladybugs (Coccinella septempunctata at five disposal facilities for dredged material. The sites had a wide range of soil trace element concentrations, acid soils and a depauperate fauna. They were very poor wildlife habitat because they were dominated by the common reed. Bioassay earthworms exposed to surface soils from three of the five sites died, whereas those exposed to four of five soils collected a meter deep survived, presumably because the deeper, unoxidized soil, was not as acid. Concentrations of Ni and Cr in the biota from each of the sites did not seem to be related to the concentrations of the same elements in soil. Although Pb, Zn and Cu concentrations in biota were correlated with those in soil, the range of concentrations in the biota was quite small compared to that in soil. The concentrations of Pb detected in mice were about as high as the concentrations previously reported in control mice from other studies. Mice from the most contaminated site (530 ppm Pb in soil) contained only slightly more Pb (8 ppm dry wt) than did mice (2-6 ppm dry wt) from sites containing much less Pb (22-92 ppm in soil). Despite the acid soil conditions, very little Cd was incorporated into food chains. Rather, Cd was leaching from the surface soil. We concluded that even the relatively high concentrations of trace elements in the acid dredged material studied did not cause high concentrations of trace elements in the biota.     

Dioxins and furans in emissions from medical waste incinerators

Dioxins and furans were detected in emissions from eight medical waste incinerators tested in California. Total uncontrolled emissions ranged from 363 to 11, 811 nanograms per dry standard cubic meter. The most effective of three wet scrubbers achieved an emissions control efficiency of 95 percent for total PCDD and PCDF. A baghouse was less than 30 percent efficient in removing PCDD and PCDF from the incinerator emissions.     

Effects of bacterial inoculum and moisture adjustment on composting of pig manure

Spent litter (a mixture of partially composted pig manure and sawdust) was taken from pig pens employing the pig-on-litter system with and without the addition of a commercial bacterial product (Odor control (OC)-organic fertilizers (OF)). A duplicate series of windrows was set up with spent litter which contained the bacterial product and a further duplicate series was set up with spent litter which did not contain the bacterial product. All four sets had their initial moisture content adjusted to 60% but one of each duplicate pair had its moisture content adjusted to 60% during the entire period of further composting in windrows. The rate of further (windrow) composting was significantly different in the litter which contained no bacterial product and which only had its moisture content adjusted at the beginning of the experiment. Decomposition was incomplete in this set even after day 91. In the three other sets, the rate of decomposition was faster and the spent litter became stabilised by day 56. This result suggests that if the bacterial product has been added during the initial pig-on-litter composting process, moisture adjustment during further (windrow) composting is not important. Conversely, if moisture was adjusted during further composting, the addition of bacterial product during initial pig-on-litter composting would be of no value. Such a finding is of remarkable significance in the further composting of spent litter since this indicates that the process could be run on a much more economical basis.     

The influence of particle surface characteristics on pollutant metal uptake by cells

The phosphatic mineral, hydroxyapatite, and two ion exchange resins have been used as artificial sediment particles. The surface properties of these materials have been studied using the Langmuir adsorption isotherm to calculate the binding capacity (B(max)) and the adsorption constant (K(L)) for zinc and cadmium ions. Mussels (Mytilus edulis) were fed on the particles and their digestive glands were subsequently removed and subjected to cell fractionation. The supernatant fraction was used to determine cytosol metal levels as a measure of the materials absorbed from the ingested particles. The level of cytosol zinc and cadmium was correlated with the K(L) values of the artificial sediments. It is suggested that phagocytosis of sediment particles plays an important part in transferring pollutants into benthic organisms and that the efficiency of this process is related to the adsorption coefficient of the particle surfaces.     

Selectivity in the complexation of actinides by humic substances

The interactions of a range of actinide elements (Th, U, Np, Pu, Am) with humic substances from the Needle's Eye natural analogue site were studied by gel permeation chromatography. Bulk humic substances were isolated by ammonia extraction, followed by dialysis against distilled water and freeze-drying. The gel permeation results suggest that Needle's Eye humic substances can be fractionated into three incompletely resolved fractions with average molecular weights determined by analytical ultracentrifugation around 49 000 for Fraction 1, around 14 700 for Fraction 2 and around 8000 for Fraction 3. Although there are significant differences between the organic matter elution patterns in individual gel permeation experiments, presumably due to differences in column packing, these are much smaller than the differences between metal ions. The uranium that is naturally present in these humic substances is largely bound in the late-eluting fraction. Spikes of the early actinides, including Np and Pu in controlled valency states, have been added to the humic substances, and gel permeation of the spiked humic substances shows that the three humic fractions vary greatly in their effectiveness and selectivity as ligands for early actinides.     

Surface complexation modeling of Yb(III) sorption and desorption on hematite and alumina

Sorption and desorption of Yb(III) were studied on hematite and on alumina using a surface complexation model. The experimental methodology was conceived to allow an analysis of the data using a constant capacitance model. The FITEQL code was used for the calculations.The experimental results tend to show reversibility of sorption when the surface loading is small, and irreversibility when the surface loading is high. Surface complexation modeling gives a good interpretation of these two phenomena, taking into account hydroxylation of the surface complexes. In these two cases, it is possible to describe sorption and desorption curves with the same surface stoichiometries and the same surface complexation constants. The existence of these surface complexes depends on the pH of the solution, surface loading, and reaction direction.     

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.     

The impact of SO2 and SO2 + ascorbic acid treatments on growth and partitioning of dry matter in Trigonella foenum-graecum L

To study the impact of SO(2) and SO(2) + ascorbic acid on growth and partitioning of dry matter in Trigonella foenum-graecum L., two-week-old plants were exposed to SO(2) for 2 h daily over a 42 day period. One of the exposed sets was treated with ascorbic acid. Plants were grown in a wire house and unexposed plants were used as controls for comparison. The parameters measured, such as dry weights of leaf, stem and root per plant, were found to be lower in the exposed sets than in the controls. The reductions were greater in dry weights of stem and root as compared with weights of leaves, indicating that the partitioning of the dry matter was altered. Greater amounts of soluble sugars and starch in the leaves of exposed plants, compared with the stem, also revealed that translocation was hampered. Reductions were greater in fruiting than in flowering, suggesting that fruit abortion was high. Although ascorbic acid treatment could mitigate the effect of SO(2), the differences were not found to be statistically significant. Significant changes were seen in fruit yield, suggesting that the effect of ascorbic acid is cumulative. The impact of SO(2) and SO(2) + ascorbic acid on partitioning of dry matter to different 'sinks' is discussed.