CFB锅炉环保项目SNCR工艺优化提效研究

某炼化企业自备电厂循环流化床锅炉(简称CFB锅炉)环保项目所采用的脱硝方法为选择性非催化还原脱硝(简称SNCR),使用的还原剂为尿素,SNCR系统投用后,虽然能使NOX排放量显著下降,但尿素用量明显过度,增加了企业脱硝成本,并导致脱硫废水氨氮含量超标。为了应对这一情况,本研究主要通过现场调节锅炉运行参数,以及基于CFD建模的方法研究出高效可靠的SNCR工艺优化调整策略及方法,结果表明:在锅炉燃料煤∶焦=4∶1掺烧比例下,氧含量不宜超过3%,有利于降低NOX生成量;控制减少石灰石量有助于提升NOX的脱除效率;通过模拟计算发现下半部喷枪起到主要的脱硝作用,可适当减少上半部喷枪、提升环下半部喷枪的尿素喷入量来提高脱硝效率。为煤焦混烧CFB锅炉脱硝系统的优化提供指导和借鉴作用。     

New models for calculating the electrical resistivity of loess affected by moisture content and NaCl concentration

Environmental Science and Pollution Research - Saline loess is an important cause of environmental geo-issues in northwest China. In this research, electrical resistivity of loess with different...     

Influence of China's Population Mobility on the Change of Regional Disparity since 1978

In this study, an econometric model about population mobility and economic growth is used to show the unbalanced distribution of population mobility in different region was remarkably related to that of regional economic growth and the large number of movers had a significant influence on regional economic growth and developing disparity. On the basis of this study, we conclude that China's population mobility also had a significant influence on the structure and tendency of regional disparity, and the population mobility enlarged the regional disparity of the whole nation, the East, and the West since the reform, besides the Midst during 1978 to 1987. Furthermore, the population mobility accelerated the increase of regional disparity in the whole nation, the Midst, and the West, but at the same time, retarded that in the East in the period of 1996–2003.     

Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

Electrocatalytic oxidation of PCP-Na by a novel nano-PbO2 anode: degradation mechanism and toxicity assessment

Environmental Science and Pollution Research - This study aims at investigating the electrocatalytic oxidation of sodium pentachlorophenate (PCP-Na) using a novel nano-PbO2 powder anode. The...     

好氧触媒在造纸法再造烟叶污水处理中的应用分析

本文围绕好氧触媒在造纸法再造烟叶污水处理中的应用展开分析。如对好氧触媒在再造烟叶污水处理中的应用必要性及好氧触媒作用原理予以介绍,并对好氧触媒在造纸法再造烟叶污水处理中应用展开试验。     

沈阳市大气PM2.5中水溶性离子的季节变化特征

为研究沈阳市大气中PM2.5及其水溶性离子的污染特征、季节差异和来源情况,使用URG-9000D在线监测系统对沈阳市2019年大气颗粒物进行连续的采样分析,并利用正交矩阵因子分析法(PMF)进行污染物的来源解析.结果 表明,2019年沈阳市秋冬季节PM2.5质量浓度变化受相对湿度影响较大,冬季PM2.5平均质量浓度达到...     

Using Si depletion in aerosol to identify the sources of crustal dust in two Chinese megacities

Depletion of Si in transported dust has been recognized for many years. It can be used to distinguish between transported and local dust in cities, although it rarely has been. Here we use the variations of the Si/Al ratio in 15 months of continuous PM_2.5 samples at Beijing (northern China) and Chongqing (southwestern China) to reveal the seasonal patterns of their dust sources. For both cities, peaks of concentration for Si and Al in PM_2.5 corresponded with minima of Si/Al, and could often be linked to pulsed air flow from deserts to the northwest. With significant depletion (up to 80%) and homogeneous distribution at urban and rural sites, Si/Al showed a clear seasonal evolution, which decreased from spring to summer, increased from fall to winter, and collapsed during Chinese Spring Festival, indicating the dominance of transported dust, local fugitive dust and firework influence, respectively. The low ratios implied that desert dust is a common source during spring at Chongqing, whereas its presence during cold season at Beijing was also more frequent than expected. Failing to recognize the depletion of Si may lead to an overestimate of desert dust by 15%–65% when using the average abundance of Al in crust (6%–8%), as in previous studies. The difference in Si/Al ratio between local and transported dust implies that >60% of the dust at Beijing came from outside the city during the springs of 2004–2006. This result can help resolve the contradictory findings on this topic that have been presented earlier.     

Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.