不同条件下高炉渣吸附水中无机磷的研究

高炉渣(BFS)是在冶炼生铁过程中产生的固体废弃物,开展高炉渣的资源化研究具有重要意义.为了对水淬高炉渣净化含磷污水的应用提供理论依据,采取等温吸附的实验方法,比较了不同水淬炉渣的吸附磷效果,研究了不同pH和不同温度下水淬炉渣吸附磷的特点,结果如下:利用Langmuir等温吸附方程炉渣吸附磷的过程进行拟合,其相关系数均能达到显著水平.炉渣的碱度越高,吸附磷的效果越好;炉渣对磷的吸附能力随溶液pH的增加而降低,且初始为酸性(pH=2、4)的溶液在吸附达到平衡后pH有所上升,而初始为碱性的溶液(pH=10、12)在吸附达到平衡后pH有所下降;炉渣对磷的吸附是一个自发放热过程.     

Co3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体,采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂,利用N₂吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征,考察了Co₃O₄的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响。结果表明,Co₃O₄的负载量为20%时,催化剂的催化活性最好;载体的孔径和催化剂的可还原性能是影响催化活性的主要因素,催化剂活性顺序为Co₃O₄ /SBA-15> Co₃O₄ /MCM41> Co₃O₄ /MCM-48。     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

Fraction characteristics of rare earth elements in the surface sediment of Bohai Bay, North China

Surface sediment samples were collected at 27 stations of Bohai Bay, North China. Sequential extractions were carried out in this study. REE were leached out from four labile fractions: Exchangeable (L1), bound to carbonates (L2), bound to Fe–Mn oxides (L3), bound to organic matter (L4), and the remainder was residual (R5). The total contents of REE fluctuate slightly in Bohai Bay, and are mainly concentrated in the middle region, showing relatively higher levels in the north than that in the south of Bohai Bay. Percentages of L1, L2, L3, L4, and R5 for REE suggest that the residual fraction accounts for the major component of REE, whereas Fe–Mn oxides also play important roles in combining labile REE. As the REE complex is not stabilized, the competition of complex could induce dissociation of the complex and redistribution of the REE in various environments. According to REE patterns and Y/Ho ratios of samples, REE are not anthropogenic or oceanic sources but riverine input, whereas suitable environment varieties can slightly affect the patterns and fractionations of REE. As powerful tracers for the variable of environment, higher anomaly of Eu and Ce in southern regions indicates a greater reduction in the condition of surface sediment in the south than that in the north of Bohai Bay.     

基于国产“风云三号”卫星MERSI的太湖蓝藻水华监测业务化应用

使用无锡市环境监测中心站环境遥感综合处理系统,对2017年7—11月FY-3/MERSI影像数据进行蓝藻水华提取分析,并通过当日与国外MODIS、VIIRS影像数据的蓝藻水华提取结果进行协同比对,验证FY-3/MERSI影像在蓝藻水华预警监测业务化应用的前景。结果表明,3种数据源均能实现蓝藻水华空间分布的业务化运行;由于卫星过境时间的不同,可综合利用这3种数据源观测太湖蓝藻水华在一天中的动态变化,分析蓝藻水华的发生规律。     

Preparation and Characterization of Collagens from the Skin of Northern Snakehead (<Emphasis Type="Italic">Channa argus)</Emphasis>

Channa argus, a type of snakehead fish native to China, is a popular food fish in certain Asian countries but is a known destructive invasive species in the US. In this study, the two collagens, i.e. acid-soluble collagen (ASC) and pepsin-solubilized collagen (PSC), were obtained from C. argus skin. The yield of ASC was 28.0% and that of PSC was 16.8% on the dry bases. The collagens were identified as the collagen of type I by SDS–PAGE patterns. The Tds were approximately 27.0?°C. Similar ultraviolet spectra of both collagens were observed. Fourier Transform infrared spectra indicated PSC structure had a little change due to the loss of terminal domains by pepsin digestion. The results of XRD proved that the two collagens retained their helical structures. The results suggest that the collagens isolated from C. argus can potentially be alternative sources of vertebrate collagens for use in the food and other industries.     

基于“压力-状态-响应”模型的江苏省环境绩效评估研究

环境绩效评估通过量化环境管理效果和分析环境管理中的不足,为改善环境管理水平提供依据。本研究依据压力-状态-响应(PSR)模型和主题框架法构建了包括环境效率、环境质量、环境治理3个二级指标和15个三级指标的市级环境绩效评估指标体系,并运用目标渐进法和均权法计算了江苏省13个地级2015年的环境绩效指数。结果显示,江苏省各地级市综合环境绩效指数分布在58.41(连云港市)~74.98(苏州市)之间,且与经济发展水平正相关。从空间分布来看,位于苏中地区的城市综合环境绩效多为良好,苏南和苏北各地之间的绩效差距较大;在二级指标中,苏南环境效率和环境治理绩效相对较好,苏中环境效率和环境质量绩效较好,苏北环境质量绩效较好。此外,本研究认为三级指标中的单位GDP用水量、空气质量达良好以上天数、工业用水重复利用率、一般工业固体废物利用率以及秸秆综合利用率等是主要的限制性指标。     

电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。     

Simulation of dam/levee-break hydrodynamics with a three-dimensional implicit unstructured-mesh finite element model

Dam failures usually cause huge economic and life losses , especially in urban areas where there is a high concentration of inhabitants and economic actors. In order to understand the physical mechanisms of the formation and development of dam-break flooding, lots of efforts have been put into different types of modelling techniques. However, most of existing models are 1D (one-dimensional) or 2D models based on the shallow water equations. In this paper, we present a 3D numerical modelling investigation of dam-break flow hydrodynamics in an open L-shape channel. A newly developed 3D unstructured mesh finite element model is used here. An absorption-like term is introduced to the Navier–Stokes equations in order to control the conditioning of the matrix equation in the numerical solution process and thus improve the stability. A wetting and drying algorithm is used here to allow the free surface height to be treated with a high level of implicitness and stability. The 3D model has been validated by comparing the results with the published experimental data. Good agreement has been achieved at six selected locations. This study shows that the 3D unstructured mesh model is capable of capturing the 3D hydraulic aspects and complicated local flows around structures in simulation of dam-break flows.