Characterizing Storm Hydrograph Rise and Fall Dynamics With Stream Stage Data1

Abstract: Storm‐flow transients (i.e., hydrograph rise and fall dynamics) may represent an important aspect of understanding streamflow dynamics. However, little is known about how temporal resolution of transient data and climate variability may color these potential indicators of hydrologic pattern or condition. Warm‐season stream stage and rainfall were monitored continuously (5 min) during the 2002 water year in eight tributaries of the Little Miami River (Ohio), which drain 17‐58 km² catchments. Rise rates generated using 5‐min data were different than those generated with mean daily data [calculated with the Indicators of Hydrologic Alteration (IHA) software], though fall rates were similar for fine and coarse temporal data. This result suggests that data with low temporal resolution may not be adequate to fully represent the dynamics of storm rise rates. Conversely, fall rates based on daily stage data (via IHA) were similar to those based on the 5‐min data, and so daily mean data may be appropriate for characterizing fall rates. We next analyzed the possible correlations between rainfall variability and storm‐flow stage dynamics. We derived rise and recession rates from storm stage hydrographs by assuming exponential rise and decay of a runoff peak. We found that raw rise rates (R_raw) were correlated with both the maximum rainfall rate and the time to the centroid of a rain event. We subsequently removed the trend based on these rainfall characteristics, which yielded new representations of rise rates abbreviated as R_rate and R_tcent, respectively, and that had lower variability than the uncorrected (raw) data. Fall rates were found to be independent of rainfall characteristics. Due to the predominant influence of stream hydrology upon aquatic biota and nutrient fluxes, our work suggests that these stage data analysis protocols can refine or otherwise reduce variability in these indices by accounting for relevant factors such as rainfall forcing. These protocols for derivation of transient indices should be tested for their potential to improve correlations between stream hydrology and temporally aligned biotic data and dissolved nutrient fluxes in streams.     

Comparative study of chromium biosorption by red, green and brown seaweed biomass

Dried biomass of the macroalgae Fucus vesiculosus and Fucus spiralis (brown), Ulva spp. (comprising Ulva linza, Ulva compressa and Ulva intestinalis) and Ulva lactuca (green), Palmaria palmata and Polysiphonia lanosa (red) were studied in terms of their chromium biosorption performance. Metal sorption was highly pH dependent with maximum Cr(III) and Cr(VI) sorption occurring at pH 4.5 and pH 2, respectively. Extended equilibrium times were required for Cr(VI) binding over Cr(III) binding (180 and 120min, respectively) thus indicating possible disparities in binding mechanism between chromium oxidation states. The red seaweed P. palmata revealed the highest removal efficiency for both Cr(III) and Cr(VI) at low initial concentrations. However, at high initial metal concentrations F. vesiculosus had the greatest removal efficiency for Cr(III) and performed almost identically to P. lanosa in terms of Cr(VI) removal. The Langmuir Isotherm mathematically described chromium binding to the seaweeds where F. vesiculosus had the largest q(max) for Cr(III) sorption (1.21mmol g(-1)) and P. lanosa had the largest Cr(VI) uptake (0.88mmol g(-1)). P. palmata had the highest affinity for both Cr(III) and Cr(VI) binding with b values of 4.94mM(-1) and 8.64mM(-1), respectively. Fourier transform infrared analysis revealed interactions of amino, carboxyl, sulphonate and hydroxyl groups in chromium binding to Ulva spp. The remaining seaweeds showed involvement of these groups to varying degrees as well as ether group participation in the brown seaweeds and for Cr(VI) binding to the red seaweeds.     

Polychlorinated biphenyls (PCBs) and hydroxy-PCBs in adipose tissue of women in Southeast Spain

Polychlorinated biphenyls (PCBs) and hydroxylated PCBs (OH-PCBs) were investigated in human adipose tissue samples collected from 20 women undergoing surgery. Mean sum of PCB and sum of OH-PCB levels were 737ng/g of lipid and 8pg/g of lipid, respectively. Among PCBs, congeners 180, 153, 138 and 170 were the most frequent and abundant, and together constituted 72% of the total amount of PCBs in adipose tissue. The PCB congener pattern and the frequencies and concentrations of non-dioxin-like and non-hydroxylated congeners observed in adipose tissue were similar in distribution and order of magnitude to the profile previously published in Spain but lower than that found in other European countries. Among OH-PCB congeners studied, 4-OH-PCB 107/118 was found at the highest concentrations followed by 3'-OH-PCB 180 and 3-OH-PCB 138. To date, no information on levels of PCB metabolites in the Spanish population is available for comparison. These three predominant OH-PCBs contributed 97% of all OH-PCBs. Twelve dioxin-like PCBs contributed around 8% of the total PCB exposure, and all were present in all study subjects. Further research is required to determine trends in human exposure to PCBs and OH-PCBs and how existing banning measures affect exposure.     

Leaching of cyanogenic glucosides and cyanide from white clover green manure

Use of crops for green manure as a substitute for chemical fertilizers and pesticides is an important approach towards more sustainable agricultural practices. Green manure from white clover is rich in nitrogen but white clover also produces the cyanogenic glucosides (CGs) linamarin and lotaustralin; CGs release toxic hydrogen cyanide (HCN) upon hydrolysis which may be utilized for pest control. We demonstrate that applying CGs in the form of a liquid extract of white clover to large columns of intact agricultural soils can result in leaching of toxic cyanide species to a depth of at least 1m. Although degradation of the CGs during leaching proceeded with half lives in the interval 1.5-35 h depending on soil characteristics, a fraction of the applied CGs (0.9-3.2%) was recovered in the leachate as either CGs or toxic cyanide species. Detoxification of the HCN formed was rapid in soil and leachate from both sandy and loamy soil. However, 30% of the leachate samples exceeded the EU threshold value of 50 micrgl(-1) total cyanide for drinking water and 85% exceeded the US threshold of 5 micrgl(-1) for cyanide chronic ecotoxicity in fresh water. This study demonstrates that even easily degradable natural products present in crop plants as defense compounds pose a threat to the quality of groundwater and surface waters. This aspect needs consideration in assessment of the risk associated with use of crops as green manure to replace chemical fertilizers and pesticides as well as in genetic engineering approaches to design crops with improved pest resistance.     

Solubility of toluene, benzene and TCE in high-microbial concentration systems

We report measurements of solubility limits for benzene, toluene, and TCE in systems that contain varying levels of biomass up to 0.13 g mL⁻¹ for TCE and 0.25 g mL⁻¹ for benzene and toluene. The solubility limit increased from 21 to 48 mM when biomass (in the form of yeast) was added to aqueous batch systems containing benzene. The toluene solubility limit increased from 4.9 to greater than 20 mM. For TCE, the solubility increased from 8 mM to more than 1000 mM. Solubility for TCE (trichloroethylene) was most heavily impacted by biomass levels, changing by two orders of magnitude as the microbial concentrations approach those in biofilms.     

Cadmium stress alters gene expression of DNA mismatch repair related genes in Arabidopsis seedlings

Cadmium (Cd) is a non essential element, and is a widespread environmental pollutant. Exposure to Cd can result in a variety of adverse health effects in plant and humans. In the current study, Arabidopsis seedlings were used as a bio-indicator of Cd pollution. Seedlings were grown on MS media containing 0-6.0 mg L(-1) Cd for 18 days, and the gene expression patterns were used to link increased Cd exposure with progressive biological effects. Reduction of total soluble protein content in shoots of the Arabidopsis seedlings occurred with increase in Cd concentrations. For the gene expression patterns, seven genes known to be involved in cell division and DNA mismatch repair (MMR) system were investigated by semi-quantitative RT-PCR, and normalized using 18S rRNA gene expression. Expression of the proliferating cell nuclear antigen 2 (atPCNA 2), MutS 3 homolog (atMSH 3) and MutL1 homolog (atMLH1) genes in shoots of Arabidopsis was strongly induced by exposure to 0.75 mg L(-1) Cd, but were repressed by other Cd concentrations whereas exposure to 0.75-6 mg L(-1) of Cd resulted in a decreased expression of atPCNA1, atMSH 2, 6 and 7 genes independently of any observable biological effects, including survival, fresh weight and chlorophyll level of shoots. This work demonstrated that specific gene expression changes could serve as useful molecular biomarkers indicative of Cd exposure and related biological effects.     

Dioxins in adipose tissue of women in Southern Spain

Seventeen polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were quantified in adipose tissue samples of non-occupationally exposed women living in Southern Spain. Geometric mean levels of sum of congeners and WHO(PCDD/F)-TEQ(2005) were 410 and 17.9pgg(-1) fat, respectively. Among PCDDs, octachlorodibenzo-p-dioxin (OCDD) showed the highest concentration with a mean value of 265pgg(-1) fat, followed by 1,2,3,6,7,8-HxCDD (49.3pgg(-1) fat) and 1,2,3,4,6,7,8-HpCDD (45.2pgg(-1) fat). These three congeners were responsible for around 90% of the sum of all PCDD/F congeners in adipose tissue. The geometric mean 2,3,7,8-TCDD value was 1.87pgg(-1) fat. 2,3,4,7,8-PeCDF (8.43pgg(-1) fat) showed the highest concentration among the PCDFs, followed by 1,2,3,4,7,8-HxCDF (4.17pgg(-1) fat) and 1,2,3,6,7,8-HxCDF (3.28pgg(-1) fat), and these three congeners were responsible for 4% of the sum of all studied PCDD/F congeners in adipose tissue and 76% of the sum of ten PCDFs. 1,2,3,7,8,9-HxCDF was the only congener not quantified in any sample, while 1,2,3,4,7,8,9-HpCDF, 1,2,3,7,8-PeCDF, OCDF and 2,3,7,8-TCDF were found in 5, 16, 16 and 19 samples, respectively. All other congeners were quantifiable in all 20 samples. Congeners contributing most to the WHO(PCDD/F)-TEQ(2005) were 1,2,3,7,8-PeCDD (31.6%), 1,2,3,6,7,8-HxCDD (28.3%) and 2,3,4,7,8-PeCDF (14.6%). The body burden of log-transformed WHO(PCDD/F)-TEQ(2005) levels increased with age (B=0.02; 95% CI=0.01, 0.03; p=0.02). Although these adipose tissue PCDD/F levels are similar to previously published findings in Spain and other European countries, further research is needed to determine trends in the exposure of women to these chemical residues.     

Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

Life cycle responses of the midge Chironomus riparius to polycyclic aromatic compound exposure

During acute exposure, polycyclic aromatic compounds (PACs) act mainly by narcosis, but during chronic exposure the same compounds may exert sublethal life cycle effects. The aim of this study was therefore to evaluate the chronic effects of sediment spiked PACs on the emergence of the midge Chironomus riparius. Three isomer pairs were selected, and 28-day LC50 values and 50% emergence times (EMt50) were determined. Concentration-response relationships were observed for phenanthrene, acridine, phenanthridine and acridone. Anthracene and phenanthridone had no effect on total emergence, but did cause a delay in emergence. Calculated porewater LC50 values correlated well with logKow values, suggesting narcosis as mode of action. In contrast, effect concentrations for delay in emergence (EMt50) deviated from narcosis, suggesting a specific mode of action during chronic exposure. It is concluded that emergence is a powerful endpoint to detect life cycle effects of PACs on a key sediment inhabiting invertebrate.     

Higher pH and faster decomposition in biowaste composting by increased aeration

Composting of source separated municipal biowaste has at several plants in Scandinavia been hampered by low pH. In this study the hypothesis that increased aeration would improve the process was tested in full-scale experiments at two large composting plants. The O2 concentrations were high (>15%) even at the low aeration rates, so the prevailing low pH was not due to an anaerobic process environment. In spite of this, increased aeration rates at the start of the process resulted in higher microbial activity, increased pH and a more stable compost product. At one plant the decomposition rate varied in proportion to the aeration rate, to the extent that the temperatures and O2 concentrations were similar during the early processes even though aeration rates varied between 10 and 50 m3/(h, m3 compost). However, increased aeration caused severe drying of the compost, but at one plant the addition of water was adequate to prevent drying. In conclusion, by increasing the aeration rates and adding water to compensate for drying, it was possible to shorten the time needed to produce a stable compost product and thus to increase the efficiency of the composting plants.