Polymer Mineralization in Soils: Effects of Cold Storage on Microbial Populations and Biodegradation Potential

Soil retrieval, processing and storage procedures can have a profound effect on soil microorganisms. In particular, changes in soil microbial populations may adversely affect the biological activity of a soil and drastically alter the soil's potential to mineralize added substrates. The effects of cold storage on the biodegradation of a series of test polymers was investigated using two soils—a synthetic soil mix (SM-L8) and a field soil (Bridgehampton silt loam) from Rhode Island (RI-1). Biodegradation tests were conducted using freshly prepared/collected soil and again following storage at 4°C for 3 to 8 months. Prior to each biodegradation test, the soils were incubated at 60% water-holding capacity (WHC) and 25°C to rejuvenate the microbial populations; the soils were incubated for periods of 48 h (freshly collected soil) or 25 days (soils stored at 4°C). Soil microbial populations were assessed by enumerating different segments of the population on agar plates containing different selective media. Mineralization of the test polymers (cellulose, poly-3-hydroxybutyrate, and starch acetate, d.s. 1.5) was monitored using standard respirometric techniques. Our results demonstrated that cold storage had a generally negative effect on the soil microbial populations themselves but that its effect on the capacity of the soil microorganisms to degrade the test polymers varied between soils and polymer type. Whereas cold storage resulted in dramatic shifts in the community structure of the soil microbial populations, substantial restoration of these populations was possible by first conditioning the soils at 60% WHC and ambient temperatures for 25 days. Likewise, although the effects of cold storage on polymer mineralization varied with the test polymer and soil, these effects could be largely offset by including an initial 25-day stabilization period in the test.     

Assessment of soil and soil-gas radon activity using active and passive detecting methods in Korea

Radon ((222)Rn) is a carcinogenic gas produced by the radioactive decay of radium ((226)Ra). It has been reported that soil and soil-gas are primary factors that could cause indoor radon problems. Six sites were selected for this study--Sanbook, Gangcheon, Jikyeong, Choojung, Geumsung and Homyoung--each was classified according to bedrock type. In order to investigate soil-gas radon activities and radon emanating power, innovated active and passive detecting methods were developed and applied under both field and laboratory conditions. Statistical analysis of results confirmed that the radon activity values measured using either active or passive methods under field or laboratory conditions could be interchangeable with each other.     

The difference of morphological characteristics and population structure in PAO and DPAOgranular sludges

We examined how long-term operation of anaerobic–oxic and anaerobic–anoxic sequencing batch reactors(SBRs) affects the enhanced biological phosphorus removal(EBPR)performance and sludge characteristics. The microbial characteristics of phosphorus accumulating organism(PAO) and denitrifying PAO(DPAO) sludge were also analyzed through a quantitative analysis of microbial community structure. Compared with the initial stage of operation characterized by unstable EBPR, both PAO and DPAO SBR produced a stable EBPR performance after about 100-day operation. From day 200 days(DPAO SBR)and 250 days(PAO SBR) onward, sludge granulation was observed, and the average granule size of DPAO SBR was approximately 5 times larger than that of PAO SBR. The DPAO granular sludge contained mainly rod-type microbes, whereas the PAO granular sludge contained coccus-type microbes. Fluorescence in situ hybridization analysis revealed that a high ratio of Accumulibacter clade I was found only in DPAO SBR, revealing the important role of this organism in the denitrifying EBPR system. A pyrosequencing analysis showed that Accumulibacter phosphatis was present in PAO sludge at a high proportion of 6%,whereas it rarely observed in DPAO sludge. Dechloromonas was observed in both PAO sludge(3.3%) and DPAO sludge(3.2%), confirming that this organism can use both O_2 and NO_3~- as electron acceptors. Further, Thauera spp. was identified to have a new possibility as denitrifier capable of phosphorous uptake under anoxic condition.     

Nutrient-impregnated charcoal: an environmentally friendly slow-release fertilizer

The widespread contamination of surface and ground water quality from the heavy use of fertilizer in modern agriculture is the current concern. Therefore, this study was carried out to develop a slow-release fertilizer using charcoal. The morphology of the charcoal impregnated fertilizer was investigated by scanning electron microscopy (SEM). This study also evaluated the release patterns of N, P, and K from impregnated charcoal using a simulated soil solution and distilled water as leaching solutions. The patterns of N, P, and K releases were examined in both static and continuous-flow conditions for 360 h. Releases of N, P, and K from impregnated charcoal were found to be slow and steady. However, the release trends of N, P, and K were higher in soil solution than distilled water under both the above conditions. Dissolution occurred when N, P, and K were released in the above leached solutions. As a result, the fertilizer impregnated charcoal could be developed as slow-release type fertilizer to minimize the contamination.     

Bird species migration ratio in East Asia, Australia, and surrounding islands

Bird migration and its relationship with the contemporary environment have attracted long-term discussion. We calculated the avian migration ratio (the proportion of breeding species that migrate) in the areas from 70°E to 180°E and examined its relationship with the annual ranges of ambient temperature, primary productivity (estimated by the Enhanced Vegetation Index), and precipitation, along with island isolation and elevational range. The avian migration ratio increased with increasing latitude in general but varied greatly between the two hemispheres. Additionally, it showed minimal differences between continents and islands. Our analyses revealed that the seasonality of ambient temperature, which represents the energy expenditure of birds, is the dominant factor in determining bird species migration. Seasonality in primary productivity and other environmental factors play an indirect or limited role in bird species migration. The lower avian migration ratio in the Southern Hemisphere can be attributed to its paleogeographical isolation, stable paleoclimate, and warm contemporary environment. Under current trends of global warming, our findings should lead to further studies of the impact of warming on bird migration.     

Characteristics of contaminants in water and sediment of a constructed wetland treating piggery wastewater effluent

Constructed wetland (CW) is the preferred means of controlling water quality because of its natural treatment mechanisms and function as a secondary or tertiary treatment unit. CW is increasingly applied in Korea for secondary effluent of livestock wastewater treatment. This study was conducted to recognize the characteristics of contaminants in the accumulated sediment at the bottom soil layer and to reduce the phosphorus release from sediments of the free water surface CW for the treatment of secondary piggery wastewater effluent from a livestock wastewater treatment facility. The results revealed that the dominant phosphorus existence types at near the inlet of the CW were non-apatite phosphorus (59%) and residual phosphorus (32%) suggesting that most of the particles of the influent are made up of inorganic materials and dead cells. Sediment accumulation is important when determining the long-term maintenance requirements over the lifetime of CW. Continuous monitoring will be performed for a further assessment of the CW system and design.     

Comparative toxicity of silver nanoparticles and silver ions to Escherichia coli

With the increase in silver(Ag)-based products in our lives, it is essential to test the potential toxicity of silver nanoparticles(Ag NPs) and silver ions(Ag ions) on living organisms under various conditions. Here, we investigated the toxicity of Ag NPs with Ag ions to Escherichia coli K-12 strain under various conditions. We observed that both Ag NPs and Ag ions display antibacterial activities, and that Ag ions had higher toxicity to E. coli K-12 strain than Ag NPs under the same concentrations. To understand the toxicity of Ag NPs at a cellular level, reactive oxygen species(ROS) enzymes were detected for use as antioxidant enzymatic biomarkers. We have also studied the toxicity of Ag NPs and Ag ions under various coexistence conditions including: fixed total concentration, with a varied the ratio of Ag NPs to Ag ions; fixed the Ag NPs concentration and then increased the Ag ions concentration; fixed Ag ions concentration and then increasing the Ag NPs concentration.Exposure to Ag NPs and Ag ions clearly had synergistic toxicity; however, decreased toxicity(for a fixed Ag NPs concentration of 5 mg/L, after increasing the Ag ions concentration) to E. coli K-12 strain. Ag NPs and Ag ions in the presence of L-cysteine accelerated the bacterial cell growth rate, thereby reducing the bioavailability of Ag ions released from Ag NPs under the single and coexistence conditions. Further works are needed to consider this potential for Ag NPs and Ag ions toxicity across a range of environmental conditions.Environmental Significance Statement: As silver nanoparticles(Ag NPs)-based products are being broadly used in commercial industries, an ecotoxicological understanding of the Ag NPs being released into the environment should be further considered. Here, we investigate the comparative toxicity of Ag NPs and silver ions(Ag ions) to Escherichia coli K-12 strain, a representative ecotoxicological bioreporter. This study showed that toxicities of Ag NPs and Ag ions to E. coli K-12 strain display different relationships when existing individually or when coexisting, and in the presence of L-cysteine materials. These findings suggest that the toxicology research of nanomaterials should consider conditions when NPs coexist with and without their bioavailable ions.     

Characterization and optimization of long-term controlled release system for groundwater remediation: a generalized modeling approach

A well-based reactive barrier system using controlled-release KMnO4 has been recently developed as a long-term in situ treatment option for plumes of dense and non-aqueous phase liquids in groundwater. In order to take advantage of the merits of controlled release systems (CRS) in environmental remediation, the release behavior needs to be optimized for the hydrologic and environmental conditions of target treatment zone. Where release systems are expected to be operated over long times, like for the reactive barriers, it may only be practical to describe the long-term behavior numerically. We developed a numerical model capable of describing release characteristics associated with variable forms and structures of long-term CRS. Sensitivity analyses and illustrative simulations showed that the release kinetics and durations would be constrained by changes in agent solubility, bulk diffusion coefficients, or structures of the release devices. The generality of the numerical model was demonstrated through simulations for CRS with monolithic and double-layered matrices. The generalized model was then used for actual design and analyses of an encapsulated-matrix CRS, which can yield constant release kinetics for several years. A well-based reactive barrier system (4.05 x 10(3)m3) using the encapsulated-matrix CRS can release approximately 1.65 kg of active agent (here MnO4(-)) daily over the next 6.6 yr, creating prolonged reaction zone in the subsurface. The generalized model-based, target-specific approach using the long-term CRS could provide practical tool for improving the efficacy of advanced in situ remediation schemes such as in situ chemical oxidation, bioremediation, or in situ redox manipulation. Development of techniques for adjusting the bulk diffusion coefficients of the release matrices and facilitating the lateral spreading of the released agent is warranted.     

Comparison of organic compositions in dust storm and normal aerosol samples collected at Gosan,Jeju Island,during spring 2005

To better understand the current physical and chemical properties of East Asian aerosols, an intensive observation of atmospheric particles was conducted at Gosan site, Jeju Island, South Korea during 2005 spring. Total suspended particle (TSP) samples were collected using pre-combusted quartz filters and a high-volume air sampler with the time intervals ranging from 3 h to 48 h. The kinds and amount of various organic compounds were measured in the samples using gas chromatography–mass spectrometry. Among the 99 target compounds detected, saccharides (average, 130 ± 14 ng m^?3), fatty acids (73 ± 7 ng m^?3), alcohols (41 ± 4 ng m^?3), n-alkanes (32 ± 3 ng m^?3), and phthalates (21 ± 2 ng m^?3) were found to be major compound classes with polyols/polyacids, lignin and resin products, PAHs, sterols and aromatic acids being minor. Compared to the previous results reported for 2001 late spring samples, no significant changes were found in the levels of their concentrations and compositions for 4 years, although the economy in East Asia, especially in China, has sharply expanded from 2001 to 2005. During the campaign at Gosan site, we encountered two distinct dust storm episodes with high TSP concentrations. The first dust event occurred on March 28, which was characterized by a predominance of secondary organic aerosols. The second event that occurred on the next day (March 29) was found to be characterized by primary organic aerosols associated with forest fires in Siberia/northeastern China. A significant variation in the molecular compositions, which was found within a day, suggests that the compositions of East Asian aerosols are heterogeneous due to multi-contributions from different source regions together with different pathways of long-range atmospheric transport of particles.     

Fate of polycyclic aromatic hydrocarbons during vitrification of incinerator ash in a coke bed furnace

Fate of polycyclic aromatic hydrocarbons (PAHs) during the vitrification of fly ash and bottom ash from the municipal waste incinerator in a coke bed furnace was investigated. In this system, both coke and lime were added to enhance the melting reaction. The major PAH sources in this system were ash and coke, which respectively contributed 97% and 3% of PAHs in the input-mass. During vitrification process, low molecular PAHs (LM-PAH, 2-3-ring), median molecular PAHs (MM-PAH, 4-ring) and high molecular PAHs (HM-PAH, 5-7-ring) mass respectively accounted for >99%, >99% and 84% of the output-mass emitted as the stack flue gas; while those discharged from the slag were <1%, <1% and 16%, respectively. The O/I (output-mass/input-mass) ratio of LM-, MM- and HM-PAHs were 0.063, 0.002 and <0.001, respectively. The high distribution in flue gas and O/I ratio of LM-PAHs is reasonable since they are more easily evaporated, hence difficult to be removed by air pollution control devices. On the contrary, the HM-PAHs, having lower vapor pressure, primarily stays mainly in slag. Based on the 21 total PAH content in feeding ash and slag, the reduction efficiency of the coke bed furnace was >99.9%. To minimize the risk of secondary pollution, the efficiency of coke bed furnace should be improved to reduce the PAH emission into ambient air.