Concentrations and chemical compositions of PM10 during hazy and non-hazy days in Beijing

In order to study the concentrations of major components,characteristics and comparison in hazy and non-hazy days of PM_(10) in Beijing,aerosol samples were collected at urban site in Beijing from December 29,2014 to January 22,2015.Heavy metals like Zn,Pb,Mn,Cu,As,V,Cr and Cd were deeply studied considering their toxic effects on human being;nine water-soluble inorganic ions(SO_4~(2-),NO_3~-,NH_4~+,Na~+,K~+,Cl~-,Ca~(2+) and Mg~(2+)) and carbon fractions(OC and EC) were also analyzed.The concentrations of heavy metals were 1.03–1.98 times higher in hazy days than those in non-hazy days,mainly due to biomass burning and coal burning.The trends in total heavy metals concentrations were basically consistent with the trends in PM concentrations except for two obvious periods(12.29–12.30;1.14–1.15);but when air masses accumulated locally or around Beijing,trends in PM concentrations and heavy metals were opposite.The proportion for NO_3~-/SO_4~(2-) indicated that mobile sources such as automobiles were important reasons for haze in Beijing.Correlation between OC and EC during non-hazy days was strong(R~2= 0.95) but it was low(R~2= 0.67) during hazy days,and large variations for OC/EC values occurred in hazy days.The calculated mass concentration of SOC is 2.58 μg/m~3,which only accounted for 10.1% of the OC concentration.When air masses from the far north-west,they decreased PM concentration in Beijing and they were relatively clean;however,those from the near east,south-east and south of the mainland increased PM concentration and they were dirty.     

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.

     

Green innovation efficiency across China’s 30 provinces: estimate,comparison, and convergence

Mitigation and Adaptation Strategies for Global Change - Considering government and market failure of environmental regulation to combat increasing GHG (greenhouse gas) emissions, green innovation...     

土地承载力研究范式的变迁、分化及其综论

基于Kuhn范式理论,将现有土地承载力研究成果显化、梳理为4种主要研究范式,即基于限制因子的研究范式、基于多因素综合的研究范式、基于参照区的研究范式、基于生态足迹的研究范式。以范式应用的时代背景、空间尺度为着眼点,对各类范式进行综合比较,结果显示：基于限制因子的土地承载力研究范式起源最早、发展最为成熟,基于多因素综合、基于参照区、基于生态足迹的3种研究范式,均是以前者为基础,按照不同的方向分化而成;范式分化的原因在于时空条件的变化所引致的亟需解释、解决的现实问题的变化。范式本身并无优劣之分,但有其独特的适应性：基于限制因子、基于生态足迹的两种研究范式适用于全球及国家等大尺度土地承载力问题,且发展较为成熟,其成果具有较强的理论和实践指导意义;基于多因素综合及基于参照区的两种研究范式适用于市县等中小尺度,但其研究较为薄弱,所得的承载力分值、承载力相对值对区域土地管理实践的指导价值有限。当前,市县等中小尺度土地承载力研究亟需加强,其指导实践的有效性与可操作性亟待大幅度提高。     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.