Mercury pollution in Ria de Aveiro (Portugal): a review of the system assessment

The Ria de Aveiro (Portugal) is a coast al lagoon adjacent to the Atlantic Ocean and it has an inner bay (Laranjo bay) that received a highly contaminated effluent discharged by a mercury cell chlor-alkali plant from the 1950s until 1994. The aim of this study is to review in a holistic way several research studies that have been carried out in the Ria de Aveiro, in order to evaluate the remobilization of the mercury accumulated within the system and the recovery of the lagoon. The spatial distribution of the total mercury in the surrounding terrestrial environment has also been considered. Results indicate that the main mercury contamination problems in the Ria de Aveiro are confined to the Laranjo bay. Mercury export to the coastal waters and its impact on the nearshore compartments (water column, sediment and biota) are low. No direct effects of the mercury from nearby industrial activities were detected in Aveiro's urban soils, although historical mercury contamination is still affecting soil quality in the immediate vicinity of the chlor-alkali plant, located in Estarreja. Moreover, macrophyte harvesting for human direct or indirect use and the consumption of mussels, crabs and the sea bass from the Laranjo bay may constitute a health risk. Further studies focusing on developing skills for the restoration of the ecosystem are presently underway.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Effects of solar radiation on the fluorescence properties and molecular weight of fulvic acids from pulp mill effluents

The pulp and paper industry generates large volume of wastewater that adversely affects water resources. Lignin derived macromolecular compounds, similar to natural humic substances, are the main waste products in the pulp mill effluents. The UV-Vis and fluorescence spectroscopies were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. Solar irradiation of the solutions of these fulvic acids caused solution acidification and decay both in the UV-Vis absorbance and in the fluorescence. This decay was not the same for the whole spectra but pointed to the selective photodegradation of lignin typical structures. Furthermore, by sequential ultrafiltration it was found that during irradiation, the high-molecular weight fractions were destroyed and low-molecular-weight constituents, potentially more able to penetrate the cell membranes of living organisms were formed. Photodegradation of macromolecular organic matter from a kraft pulp mill effluent may be a key process occurring in natural waters that modifies the physicochemical properties of such effluents.     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia Usneoides (L.) in an industrialized area in Rio de Janeiro state, south east Brazil--Part I: PCDD and PCDF

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic Bromeliad species as biomonitor and measuring total deposition rates on funnels covered with polyurethane foams. Samples were collected during 78 days in V.R. and 95 days in PNI in winter (dry season, June-August 2003) and during 114 days in both areas in summer (rainy season, December 2003-February 2004). The PCDD/PCDF deposition rates ranged from 0.10 to 1.9 pg WHO-TEQ/(m2 day) in winter and from 0.11 to 2.2 pg WHO-TEQ/(m2 day) in summer. Deposition rates found in V.R. in summer were four- to ninefold higher than those measured in PNI, while in winter deposition rates in both regions were in the same range. Deposition rates in V.R. in summer were about five fold lower than those measured in 1996. PCDD/PCDF levels in biomonitor samples were between 0.95 and 14.6 ng WHO-TEQ/kg d.m. in winter and between 2.2 and 5.2 ng WHO-TEQ/kg d.m. in summer. In winter, concentrations found in V.R. were up to 11 times higher than those found in PNI, while in summer the levels measured in both areas were comparable. The homologue and isomer profiles found in the deposition as well as in the biomonitor samples from V.R. indicate that steel production is the main source of contamination in the region, whereas in PNI, the long range transport of these pollutants is the predominant contamination pathway.     

The environmental behaviour of polychlorinated phenols and its relevance to cork forest ecosystems: a review

Pentachlorophenol (PCP) has been used as a herbicide, biocide and preservative worldwide since the 1930s and as a result, extensive and prolonged contamination exists. The environmental impact increases when its many degradation products are taken into consideration. A number of chloroanisols and their related chlorophenols have been found in cork slabs collected from Portuguese oak tree forests before stopper manufacturing, and contamination by PCP and polychlorinated anisole (PCA) has been detected in Canadian forests. It is suggested that the use of polychlorinated phenols, in particular PCP, is thought to be a cause of the cork taint problem in wine, a major socio-economic impact not only for industry but on sensitive and highly biodiverse ecosystems. It also highlights particular issues relating to the regional regulation of potentially toxic chemicals and global economics world wide. To fully understand the impact of contamination sources, the mechanisms responsible for the fate and transport of PCP and its degradation products and assessment of their environmental behaviour is required. This review looks at the current state of knowledge of soil sorption, fate and bioavailability and identifies the challenges of degradation product identification and the contradictory evidence from field and laboratory observations. The need for a systematic evaluation of PCP contamination in relation to cork forest ecosystems and transfer of PCP between trophic levels is emphasised by discrepancies in bioaccumulation and toxicity. This is essential to enable long term management of not only transboundary contaminants, but also the sustainable management of socially and economically important forest ecosystems.     

Virological Characterization of Roof-Harvested Rainwater of Densely Urbanized Low-Income Region

Food and Environmental Virology - Roof-harvested rainwater (RHRW) is considered relatively clean water, even though the possible presence of pathogens in the water may pose human health risks. In...