Parabens abatement from surface waters by electrochemical advanced oxidation with boron doped diamond anodes

The removal efficiency of four commonly-used parabens by electrochemical advanced oxidation with boron-doped diamond anodes in two different aqueous matrices, namely ultrapure water and surface water from the Guadiana River, has been analyzed. Response surface methodology and a factorial, composite, central, orthogonal, and rotatable (FCCOR) statistical design of experiments have been used to optimize the process. The experimental results clearly show that the initial concentration of pollutants is the factor that influences the removal efficiency in a more remarkable manner in both aqueous matrices. As a rule, as the initial concentration of parabens increases, the removal efficiency decreases. The current density also affects the removal efficiency in a statistically significant manner in both aqueous matrices. In the water river aqueous matrix, a noticeable synergistic effect on the removal efficiency has been observed, probably due to the presence of chloride ions that increase the conductivity of the solution and contribute to the generation of strong secondary oxidant species such as chlorine or HClO/ClO ⁻. The use of a statistical design of experiments made it possible to determine the optimal conditions necessary to achieve total removal of the four parabens in ultrapure and river water aqueous matrices.

     

Microscale air quality impacts of distributed power generation facilities

The electric system is experiencing rapid growth in the adoption of a mix of distributed renewable and fossil fuel sources, along with increasing amounts of off-grid generation. New operational regimes may have unforeseen consequences for air quality. A three-dimensional microscale chemical transport model (CTM) driven by an urban wind model was used to assess gaseous air pollutant and particulate matter (PM) impacts within ~10 km of fossil-fueled distributed power generation (DG) facilities during the early afternoon of a typical summer day in Houston, TX. Three types of DG scenarios were considered in the presence of motor vehicle emissions and a realistic urban canopy: (1) a 25-MW natural gas turbine operating at steady state in either simple cycle or combined heating and power (CHP) mode; (2) a 25-MW simple cycle gas turbine undergoing a cold startup with either moderate or enhanced formaldehyde emissions; and (3) a data center generating 10 MW of emergency power with either diesel or natural gas-fired backup generators (BUGs) without pollution controls. Simulations of criteria pollutants (NO₂, CO, O₃, PM) and the toxic pollutant, formaldehyde (HCHO), were conducted assuming a 2-hr operational time period. In all cases, NO_x titration dominated ozone production near the source. The turbine scenarios did not result in ambient concentration enhancements significantly exceeding 1 ppbv for gaseous pollutants or over 1 µg/m³ for PM after 2 hr of emission, assuming realistic plume rise. In the case of the datacenter with diesel BUGs, ambient NO₂ concentrations were enhanced by 10–50 ppbv within 2 km downwind of the source, while maximum PM impacts in the immediate vicinity of the datacenter were less than 5 µg/m³.

Implications: Plausible scenarios of distributed fossil generation consistent with the electricity grid’s transformation to a more flexible and modernized system suggest that a substantial amount of deployment would be required to significantly affect air quality on a localized scale. In particular, natural gas turbines typically used in distributed generation may have minor effects. Large banks of diesel backup generators such as those used by data centers, on the other hand, may require pollution controls or conversion to natural gas-fired reciprocal internal combustion engines to decrease nitrogen dioxide pollution.     

Microbially mediated aerobic and anaerobic degradation of acrylamide in a western United States irrigation canal

Acrylamide (AMD), a neurotoxin and suspected carcinogen, is present at concentrations of up to 0.05% in linear anionic polyacrylamide, which is under evaluation as a temporary sealant in unlined irrigation canal systems across the United States. We examined the microbially mediated degradation of AMD and diversity of AMD-degrading microbial physiotypes in the Rocky Ford Highline Canal, Colorado to better constrain the potential fate ofAMD in a canal environment. Microorganisms able to use AMD (500 mg L(-1)) as a sole nitrogen source were relatively abundant (2.3 x 10(3) to 9.4 x 10(3) cells mL(-1) in water and 4.2 x 10(3) to 2.3 x 10(5) cells g(-1) in sediment). Only sediment samples contained microorganisms able to use AMD as a sole carbon source. Acrylamide (up to 100 mg L(-1)) was efficiently removed from amended canal water and sediment slurries under aerobic conditions, but no AMD degradation was observed in abiotic controls. Anaerobic degradation of AMD by nitrate-, sulfate-, and iron-reducing microorganisms was also tested, with nitrate reducers affecting the highest amounts of AMD removal (70.3-85%) after 60 d. All representatives (n=15) from a collection of 256 AMD-degrading microbial isolates from Rocky Ford Highline Canal were closely related to well characterized environmental bacteria capable of facultative nitrate respiration. Our results demonstrate that natural microbial populations within this canal are capable of AMD degradation under aerobic and anaerobic conditions and that this degradation is performed by naturally abundant bacteria likely to be present in other freshwater irrigation canals or similar lotic habitats.     

Assessment of human health risk related to metals by the use of biomonitors in the province of Córdoba, Argentina

The evaluation of metal contents in the environment is of vital importance for the assessment of human exposure. Thus the species Usnea amblyoclada, Ramalina celastri and Tillandsia capillaris were tested as bioaccumulators of transition metals in the urban area of Córdoba city, Argentina. The level of metals on biomonitors was compared to that of total deposition samples. All three species discriminated zones within the urban area of Córdoba city with different pollution levels; they revealed high levels of Zn in the downtown area and confirmed high levels of some transition metals in an industrial area. The correlation analysis revealed that the lichen R. celastri had the highest correlation rates with total deposition samples, suggesting it is a valuable biomonitor of atmospheric pollution. A significant relationship was also observed between respiratory diseases in children and the contents of metal accumulated in R. celastri and T. capillaris, indicating their usefulness when assessing human exposure to metals.     

Macroalgae mitigation potential for fish aquaculture effluents: an approach coupling nitrogen uptake and metabolic pathways using Ulva rigida and Enteromorpha clathrata

Aquaculture effluents are rich in nitrogen compounds that may enhance local primary productivity, leading to the development of algae blooms. The goal of this study was to assess the potential use of naturally occurring green macroalgae (Ulva and Enteromorpha) as bioremediators for nitrogen-rich effluents from a fish aquaculture plant, by evaluating their respective uptake dynamics under controlled conditions. Ulva and Enteromorpha were incubated separately in aquaculture effluent from a local pilot station. Algae tissue and water samples were collected periodically along 4 h. For each sample, nitrate, nitrite, and ammonia concentrations were quantified in the effluent, while internal algae reserve pools and nitrate reductase activity (NRA) were determined within the algae tissues. Both macroalgae absorbed all dissolved inorganic nitrogen compounds in less than 1 h, favoring ammonia over nitrate. Ulva stored nitrate temporarily as an internal reserve and only used it after ammonia availability decreased, whereas Enteromorpha stored and metabolized ammonia and nitrate simultaneously. These distinct dynamics of ammonia and nitrate uptake supported an increase in NRA during the experiment. This study supports the hypothesis that Ulva or Enteromorpha can be used as bioremediators in aquaculture effluents to mitigate excess of dissolved inorganic nitrogen.     

Sugarcane straw management and soil attributes on alachlor and diuron sorption in highly weathered tropical soils

This research evaluated the effects of the new sugarcane harvesting system (without straw burning) and soil attributes on the organic carbon (OC) accumulation and sorption of alachlor (2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)acetamide) and diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in highly weathered Brazilian soils. Alachlor was more likely to leach (K _d,app = 1.0–7.0 L kg^?1 and mean K _oc,app = 174 L kg^?1) than diuron (K _d,app = 6.2–116.3 L kg^?1 and mean K _oc,app = 1789 L kg^?1). The sorption coefficient (K _d,app) values correlated better with soil OC contents, but the Fe-oxides also played an important role in these highly weathered soils. Sorption was enhanced in the areas without straw burning mostly due to OC accumulation that was higher in the clayey soils, but it was not enough to change their mobility classification.     

Local ecological knowledge and incremental adaptation to changing flood patterns in the Amazon delta

The need for understanding the factors that trigger human responses to climate change has opened inquiries on the role of indigenous and local ecological knowledge (ILK) in facilitating or constraining social adaptation processes. Answers to the question of how ILK is helping or limiting smallholders to cope with increasing disturbances to the local hydro-climatic regime remain very limited in adaptation and mitigation studies and interventions. Herein, we discuss a case study on ILK as a resource used by expert farmer-fishers (locally known as Caboclos) to cope with the increasing threats on their livelihoods and environments generated by changing flood patterns in the Amazon delta region. While expert farmer-fishers are increasingly exposed to shocks and stresses, their ILK plays a key role in mitigating impacts and in strengthening their adaptive responses that are leading to a process of incremental adaptation (PIA). We argue that ILK is the most valuable resource used by expert farmer-fishers to adapt the spatial configuration and composition of their land-/resource-use systems (agrodiversity) and their produced and managed resources (agrobiodiversity) at landscape, community and household levels. We based our findings on ILK on data recorded for over the last 30 years using detailed ethnographic methodologies and multitemporal landscape mapping. We found that the ILK of expert farmer-fishers and their “tradition of change” have facilitated the PIA to intensify a particular production system to optimize production across a broad range of flood conditions and at the same time to manage or conserve forests to produce resources and services.     

Analysis of the energy demand of the Chilean mining industry and its coverage with solar thermal technologies

The mining industry represents more than half of Chile’s foreign exchange earnings and its increasing expansion will demand a continuous development of its energy supplies. Mostly, all the mines in Chile are located in the desert regions, having a large surface with one of the highest solar radiations levels and clearest skies in the world. Covering the mining industry’s energy demand with solar energy is thus an obvious and promising approach. In this paper, the implementation of solar thermal heating is studied in every mining process and the solar thermal electricity generation for the entire mine demand is considered as well. The work concludes that the installation of flat plate collectors to heat water for mine processes, especially for electrowinning, is strongly recommended. Additionally, the installation of solar thermal power plants can satisfy the mining electricity demand.     

Influence of the operation conditions on CO2 capture by CaO-derived sorbents prepared from synthetic CaCO3

In this work, a statistical experimental design is performed in order to prepare CaCO₃ materials for use as CaO-based CO₂ sorbent precursors. The influence of different operational parameters such as synthesis temperature (ST), stirring rate (SR) and surfactant percent (SP) on CO₂ capture is studied by applying Response Surface Methodology (RSM). The samples were characterized using different analytical techniques including X-ray diffraction, N₂ adsorption isotherm analysis and Scanning Electron Microscopy–X-ray Energy Dispersive Spectroscopy (SEM-EDX). CO₂ capture capacity was determined by means of a thermogravimetric analyzer which recorded the mass uptake of the samples when these were exposed to a gas stream containing diluted (15%) CO₂. The statistical approach used in this work provides a rapid way of predicting and optimizing the main preparation variables of CaO-derived sorbents for CO₂ sorption. The results obtained clearly indicate that four parameters statistically influence CO₂ uptake: SR, the square of SR, its interaction with SP and the square of SP.