Analysis of the energy demand of the Chilean mining industry and its coverage with solar thermal technologies

The mining industry represents more than half of Chile’s foreign exchange earnings and its increasing expansion will demand a continuous development of its energy supplies. Mostly, all the mines in Chile are located in the desert regions, having a large surface with one of the highest solar radiations levels and clearest skies in the world. Covering the mining industry’s energy demand with solar energy is thus an obvious and promising approach. In this paper, the implementation of solar thermal heating is studied in every mining process and the solar thermal electricity generation for the entire mine demand is considered as well. The work concludes that the installation of flat plate collectors to heat water for mine processes, especially for electrowinning, is strongly recommended. Additionally, the installation of solar thermal power plants can satisfy the mining electricity demand.     

Strategies in a metallophyte species to cope with manganese excess

Environmental Geochemistry and Health - The effect of exposure to high Mn concentration was studied in a metallophyte species, Erica andevalensis, using hydroponic cultures with a range of Mn...     

Economic and financial aspects of mine closure

Today, mine reclamation is a key component to a successful mine plan. Most of the industrialized nations have recognized the need to make mining activities relatively environmentally friendly, if they want to continue to benefit from the economic gains from mineral resource development. Countries such as the United States, Canada, Australia and South Africa are leaders in the field and have implemented relatively sophisticated legislation to ensure environmentally correct mine closure. These countries rely on a combination of strict control strategies and economic penalties to ensure compliance. Yet, from the firm's perspective, reclamation activities are counterproductive as they cut into profits. In order to attract economic development and earn much needed economic capital, most of the rest of the world, particularly the developing countries, lack effective mine closure legislation. The traditional command and control type of legislation that is sometimes used is either vague and therefore avoided, or not enforced appropriately, resulting in an undesirable level of environmental degradation. With the use of case studies from Brazil, this article shows that direct controls are effective in some instances and not in others. It proposes that economic and financial tools may be more effective than the traditional direct controls in getting firms to comply with environmental standards, particularly in developing countries where environmental compliance is more difficult to achieve. It explains the use of performance bonding as one type of economic incentive that has proven to be an effective environmental policy in mine planning and closure. The authors additionally push beyond the typical style of performance bonds to introduce a flexible bonding and insurance system that allows governments to maintain strict environmental standards but limits firms financial exposure during the mining process. Such a system learns from the successes of the industrialized countries that use performance bonding and is sensitive to the needs of developing nations to attract investment yet maintain environmental integrity.     

An approach for restoration of the water quality with emphasis on the removal of organochlorine pesticides and eutrophic conditions in tropical rivers

This work deals with an approach for the water quality restoration with emphasis on the removal of organochlorine pesticides and eutrophic conditions in tropical rivers, causing influence on the management of the central-regional aqueduct, as a source of water supply for human consumption (4 million people) and industrial production in the states of Carabobo, Cojedes and Aragua, Venezuela, testing the phytoremediation techniques through Vetiveria zizanioides (VZ) species and coupled bioreactors, Sequencing Batch Reactor (SBR) followed by an Upflow Anaerobic Filter in Three Separate Stages (UAF-3SS). Five rivers are involved known as Chirgua, Paito Guacara, Ereigüe, and Tucutunemo, whose waters have been classified as hypereutrophic, and containing organochlorine pesticides (OCPs). As a sample, for Tucutunemo River, OCPs included to DDT (dichlorodiphenyltrichloroethane) and its isomers and DRINs (Aldrin, Endrin and Dieldrin) dissolved in water and sorbed on sediments, which were measured during the dry and rainy seasons in the period 2013 to 2016, in three monitoring stations distributed in a reach of 15 km. The results indicated that p.p′-DDT concentration dissolved in water was increased up to 10 times from rainy to dry seasons, indicating that a permanent use of it is being carried out by farmers in the agricultural activity development. Steady concentrations of the DTT isomers (e.g., p.p′-DDD and p.p′-DDE) and Aldrin isomers (e.g., Dieldrin) demonstrated that the anaerobic and aerobic biodegradation processes occurred along the river and between climatic seasons. At experimental scale, VZ hydroponic system developed over a period of 6 months for the removal of nutrients demonstrated moderately low to high removal efficiencies. With respect coupled bioreactors, each bioreactor has been experimentally tested, demonstrating satisfactory performance in Chemical Oxygen Demand (COD) removal from industrial wastewater containing recalcitrant and inhibitory substances (46%–98%), which was estimated in the influent ranging from 3500 to 5500 mg/L, evidencing that coupling of bioreactors might lead to a effluent COD complying with environmental regulations.     

Influence of the operation conditions on CO2 capture by CaO-derived sorbents prepared from synthetic CaCO3

In this work, a statistical experimental design is performed in order to prepare CaCO₃ materials for use as CaO-based CO₂ sorbent precursors. The influence of different operational parameters such as synthesis temperature (ST), stirring rate (SR) and surfactant percent (SP) on CO₂ capture is studied by applying Response Surface Methodology (RSM). The samples were characterized using different analytical techniques including X-ray diffraction, N₂ adsorption isotherm analysis and Scanning Electron Microscopy–X-ray Energy Dispersive Spectroscopy (SEM-EDX). CO₂ capture capacity was determined by means of a thermogravimetric analyzer which recorded the mass uptake of the samples when these were exposed to a gas stream containing diluted (15%) CO₂. The statistical approach used in this work provides a rapid way of predicting and optimizing the main preparation variables of CaO-derived sorbents for CO₂ sorption. The results obtained clearly indicate that four parameters statistically influence CO₂ uptake: SR, the square of SR, its interaction with SP and the square of SP.     

Spatial distribution and quantification of endocrine-disrupting chemicals in Sado River estuary, Portugal

The important Portuguese Sado River estuary has never been investigated for the presence of potentially endocrine-disrupting chemicals (EDCs), such as natural estrogens (estradiol, estrone), pharmaceutical estrogens (17α-ethynylestradiol), phytoestrogens (daidzein, genistein and biochanin A), or industrial chemicals (4-octylphenol, 4-nonylphenol, and bisphenol A). Thus, the main objective of this study was to evaluate their presence at 13 sampling points distributed between both the industrial and the natural reserve areas of the estuary, zones 1 and 2, respectively. For that, water samples collected in summer and winter were processed by solid phase extraction and analyzed by high-performance liquid chromatography with photodiode array detection and gas chromatography–mass spectroscopy. Results showed that estrone, ethynylestradiol, all the aforementioned phytoestrogens as well as bisphenol A and 4-octylphenol were found in zone 1. In zone 2, neither estrogens nor 4-OP were found. However, in the same zone, daidzein (500 ng/L) and genistein (320 ng/L) attained their highest levels in summer, whereas biochanin A peaked in winter (170 ng/L). Furthermore, bisphenol A was also found in some areas of zone 2, but showed similar concentrations in both surveys (about 220 ng/L). This study demonstrated that the Sado River estuary had low EDCs levels, suggesting that the Sado’s high hydrodynamic activity may be involved in the dilution of local pollution. It was suggested that at the current levels of concentrations, all assayed EDCs are unlikely to individually cause endocrine disruption in local animals. However, under a continuous exposure scenario, an additive and/or synergistic action of the estrogenic chemicals load can not be excluded, and so, continuous monitoring is advisable.     

Role of carbonyls and aromatics in the formation of tropospheric ozone in Rio de Janeiro,Brazil

The ozone in Rio de Janeiro has been in violation of national air quality standards. Among all of the monitoring stations, the Bangu neighbourhood has the most violations of the national standard of 160 μg m^?3 for the years 2012 and 2013. This study evaluated the reactivity of the carbonyls and aromatics in the tropospheric ozone formation processes. The samples were collected between July and October of 2013. Carbonyls were sampled using SiO₂ cartridges coated with C₁₈ and impregnated with 2,4-dinitrophenylhydrazine and were analysed by HPLC. Activated carbon cartridges and GC/MS were used to measure the concentration of monoaromatic hydrocarbons. An air quality monitoring station provided the concentrations of the criteria pollutants and the meteorological parameters. Cluster analysis and a Pearson correlation matrix were used to determine the formation of groups and the correlation of the variables. The evaluation of the volatile organic compounds (VOC) reaction with OH radicals and the MIR scale was used to extrapolate the reactivity of VOCs to the ozone formation. The average concentrations obtained were 19.7 and 51.9 μg m^?3 for formaldehyde and acetaldehyde, respectively. The mean concentrations obtained for aromatics were 1.5, 6.7, 1.5, 2.6 and 1.6 μg m^?3 for benzene, toluene, ethyl benzene, m+p-xylene and o-xylene, respectively. The cluster analysis indicated the presence of three similar groups, with one formed by gaseous criteria pollutants, another formed by the meteorological parameters, ozone and fine particles, and the last group formed by the aromatics. For the two reactivity scales evaluated, acetaldehyde and toluene were the main ozone precursors.