Traffic and catalytic converter - related atmospheric contamination in the metropolitan region of the city of Rio de Janeiro, Brazil

In this work, 24-h PM10 samples were collected in Rio de Janeiro, Brazil, and analysed for trace elements (Cd, Ce, Cu, La, Mo, Ni, Pb, Pd, Rh, Sb and Sn). The sampling was carried out at five locations (Bonsucesso; Centro, downtown city; Copacabana; Nova Igua?u and Sumaré) with different traffic densities and anthropogenic activities. An analytical method based on the EPA method for the determination of trace elements in airborne particulate matter (PM), using ultrasonic-assisted extraction and inductively coupled plasma mass spectrometry (ICP-MS) was applied. Our results suggest that vehicular traffic is the most important source of environmental pollution at the studied sites. The presence of Mo, Pd and Rh in the analysed filters reflects an additional source of pollution caused by the erosion and deterioration of automotive catalytic converters.     

Radon in indoor air of primary schools: determinant factors,their variability and effective dose

Radon is a radioactive gas, abundant in granitic areas, such as in the city of Porto at the north-east of Portugal. This gas is a recognized carcinogenic agent, being appointed by the World Health Organization as the leading cause of lung cancer after smoking. The aim of this preliminary survey was to determine indoor radon concentrations in public primary schools, to analyse the main factors influencing their indoor concentration levels and to estimate the effective dose in students and teachers in primary schools. Radon concentrations were measured in 45 classrooms from 13 public primary schools located in Porto, using CR-39 passive radon detectors for about 2-month period. In all schools, radon concentrations ranged from 56 to 889 Bq/m³ (mean = 197 Bq/m³). The results showed that the limit of 100 Bq/m³ established by WHO IAQ guidelines was exceeded in 92 % of the measurements, as well as 8 % of the measurements exceeded the limit of 400 Bq/m³ established by the national legislation. Moreover, the mean annual effective dose was calculated as 1.25 mSv/y (ranging between 0.58 and 3.07 mSv/y), which is below the action level (3–10 mSv). The considerable variability of radon concentration observed between and within floors indicates a need to monitor concentrations in several rooms for each floor. A single radon detector for each room can be used, provided that the measurement error is considerably lower than variability of radon concentration between rooms. The results of the present survey will provide useful baseline data for adopting safety measures and dealing effectively with radiation emergencies. In particular, radon remediation techniques should be used in buildings located in the highest radon risk areas of Portugal. The results obtained in the current study concerning radon levels and their variations will be useful to optimize the design of future research surveys.     

Considering the needs of indigenous and local populations in conservation programs

Local rural and indigenous communities have assumed increasing responsibility for conservation within and between areas buffering the impacts of agricultural or resource‐extraction zones and protected areas. Empowering local communities as central partners in conservation and climate‐change mitigation has allowed many people to gain access to land and citizenship rights but has provided limited improvements in access to social services and economic opportunities even as expectation about their role as environmental stewards grows. These expectations, however, are inconsistent with reality. We conducted multiple field studies in Brazil since the mid‐1980s to illustrate the discrepancies between conservation programs and local conditions and expectations. We suggest that public policies and conservation programs should not delegate responsibility for managing protected areas to local and indigenous communities without considering local needs and expectations and locals’ attitudes toward conservation. In other words, behavior that maintains or improves the environment should not be treated as traditional based on the expectations of outsiders. Framing local populations as traditional environmentalists creates contradictions and frustrations for local populations and for conservation professionals and policy makers.     

Climate-driven changes in air quality over Europe by the end of the 21st century,with special reference to Portugal

Climate change alone may deeply impact air quality levels in the atmosphere because the changes in the meteorological conditions will induce changes on the transport, dispersion and transformation of air pollutants. The aim of this work was to evaluate the impact of climate change on the air quality over Europe and Portugal, using a reference year (year 1990) and a IPCC SRES A2 year (year 2100). The Hadley Centre global atmospheric circulation model (HadAM3P) was used to provide results for these two climatic scenarios, which were then used as synoptic forcing for the MM5-CHIMERE air quality modelling system. In order to assess the contribution of future climate change on O₃ and PM concentrations, no changes in regional emissions were assumed and only climate change forcing was considered. The modelling results suggest that the O₃ monthly mean levels in the atmosphere may increase almost 50 μg m^?3 across Europe in July under the IPCC SRES A2 scenario. In Portugal, this increase may reach 20 μg m^?3. The changes of PM10 monthly average values over Europe will depend on the region. The increase in PM10 concentrations during specific months could be explained by the average reduction of the boundary layer height and wind speed.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

Relevance of the economic crisis in chemical PM10 changes in a semi-arid industrial environment

This paper shows the changes in PM(10) levels and chemical composition in a region in southeast Spain between two periods: September 2005-August 2006 and June 2008-May 2009. PM(10) levels in this arid region, with a great number of cement, ceramic and related industries, have decreased in the second period in concordance with the reduction of industrial production due to the economic crisis and the closure of a cement plant. Annual average levels of PM(10) decreased from 41?μg?m(-3) in 2005 to 30?μg?m(-3) in 2008 (27%) and to 23?μg?m(-3) in 2009 (23%). The relative contribution of the different sources has not changed in the area in the latter period and the elements with mineral origin are the main components of the PM(10) composition. There is a reduction in the concentration of the components that have soil-related industries and crustal material resuspension as their main sources, mainly in the case of CO(3) (2-), Ca, Sr, Tl and Pb, but the seasonal patterns were the same in both periods. As a particular case, there is an uncoupling between the seasonal evolution of SO(2) and sulphates in the two study periods, which remarks the existence of a sulphate regional background that does not depend on SO(2) local emissions. The decrease of V, Ni and Tl levels reflects the reduction of the industrial activity during the crisis period, affecting mainly the ceramic sector characterised by a great decrease of Tl levels.