Dynamics in the global protected-area estate since 2004

Nations of the world have committed to a number of goals and targets to address global environmental challenges. Protected areas have for centuries been a key strategy in conservation and play a major role in addressing current challenges. The most important tool used to track progress on protected-area commitments is the World Database on Protected Areas (WDPA). Periodic assessments of the world's protected-area estate show steady growth over the last 2 decades. However, the current method, which uses the latest version of the WDPA, does not show the true dynamic nature of protected areas over time and does not provide information on sites removed from the WDPA. In reality, this method can only show growth or remain stable. We used GIS tools in an approach to assess protected-area change over time based on 12 temporally distinct versions of the WDPA that quantify area added and removed from the WDPA annually from 2004 to 2016. Both the narrative of continual growth of protected area and the counter-narrative of protected area removal were overly simplistic. The former because growth was almost entirely in the marine realm and the latter because some areas removed were reprotected in later years. On average 2.5 million km² was added to the WDPA annually and 1.1 million km² was removed. Reasons for the inclusion and removal of protected areas in the WDPA database were in part due to data-quality issues but also to on-the-ground changes. To meet the 17% protected-area component of Aichi Biodiversity Target 11 by 2020, which stood at 14.7% in 2016, either the rate of protected-area removal must decrease or the rate of protected-area designation and addition to the WDPA must increase.     

Exclusion of chromosomal mosaicism in amniotic fluid cultures: Efficacy of in situ versus flask techniques

Accurate diagnosis of mosaicism in amniotic fluid cell cultures represents a major problem. If insufficient cells are analysed, true fetal mosaicism may go undetected. False-positive diagnosis is also possible since a second cell line may arise in vitro and not reflect the true fetal genetic constitution. These difficulties apply to both flask and in situ culture techniques, to varying degrees. The relative accuracy of flask versus in situ culture techniques in excluding mosaicism was determined by statistical analysis of experimental data from ten pairs of mixed male-female amniotic fluid specimens. The data support the idea that the majority of in situ colonies are independent of one another. The following conclusions are drawn: (1) analysis of a single metaphase from a number of different colonies enhances the confidence for excluding mosaicism; (2) analysis of more than one cell per colony offers little advantage; (3) exclusion of a given level of mosaicism requires analysis of fewer metaphases using the in situ method; (4) the confidence for excluding mosaicism is high with both in situ and flask techniques, using the provided guidelines; and (5) it is shown that the two-stage approach used by many laboratories is currently the most efficient way to exclude mosaicism.     

Aerosol Research and Inhalation Epidemiological Study (ARIES): Air Quality and Daily Mortality Statistical Modeling— Interim Results

ABSTRACT

The Aerosol Research and Inhalation Epidemiological Study (ARIES) is an EPRI-sponsored project to collect air quality and meteorological data at a single site in northwestern Atlanta, GA. Seventy high-resolution air quality indicators (AQIs) are used to examine statistical relationships between air quality and health outcome end points. Contemporaneous mortality data are collected for Fulton and DeKalb counties in Georgia. Currently, 12 months of air quality and weather data are available for analysis, from August 1998 through July 1999.

The interim mortality analysis used Poisson regression in generalized additive models (GAMs). The estimated log-linear association of mortality with various AQIs was adjusted for smoothed functions of time and meteorological data. The analysis considered daily deaths due to all nonaccidental causes, deaths to persons 65 years or older, and deaths in each of the two constituent counties. The fine particle effect associated with the four mortality subgroups, using only today (lag 0), yesterday (lag 1), 2-day average (average of today and yesterday), and first difference (today minus yesterday) measurements of the air quality relative to today's number of deaths was positive for lag 0, lag 1, and 2-day average and positive only for decedents at least 65 years of age using first difference. The t values ranged from 0.81 to 1.15 for lag 0, 1.04 to 1.53 for lag 1, 1.10 to 1.66 for 2-day average, and -0.32 to 0.33 for first difference with 346 or 347 days of data. No statistically significant estimate of the linear coefficient was found for the other 14 air quality variables in our interim analysis for the four mortality subgroups. We discuss diagnostics to support these models.

These interim analyses did not include an evaluation of sensitivity to a larger set of lag structures, nonlinear model specifications, multipollutant analyses, alternative weather model and smoothing model specifications, air pollution imputation schemes, or cause-specific mortality indicators, nor did they include a full reporting of model selection or goodness-of-fit indicators. No conclusion can be drawn at this time about whether the findings from subsequent studies have sufficiently greater power to detect effects comparable to those found in other U.S. cities including at least 2 or 3 years of data.     

Particulate Emissions from Construction Activities

Abstract

Although it has long been recognized that road and building construction activity constitutes an important source of particulate matter (PM) emissions throughout the United States, until recently only limited research has been directed to its characterization. This paper presents the results of PM₁₀ and PM_2.5 (particles ≤10 μm and ≤2.5 μm in aerodynamic diameter, respectively) emission factor development from the onsite testing of component operations at actual construction sites during the period 1998 –2001. Much of the testing effort was directed at earthmoving operations with scrapers, because earthmoving is the most important contributor of PM emissions across the construction industry. Other sources tested were truck loading and dumping of crushed rock and mud and dirt carryout from construction site access points onto adjacent public paved roads. Also tested were the effects of watering for control of scraper travel routes and the use of paved and graveled aprons at construction site access points for reducing mud and dirt carryout. The PM₁₀ emissions from earthmoving were found to be up to an order of magnitude greater than predicted by AP-42 emission factors drawn from other industries. As expected, the observed PM_2.5:PM₁₀ emission factor ratios reflected the relative importance of the vehicle exhaust and the resuspended dust components of each type of construction activity. An unexpected finding was that PM_2.5 emissions from mud and dirt carryout were much less than anticipated. Finally, the control efficiency of watering of scraper travel routes was found to closely follow a bilinear moisture model.     

Metolachlor and chlorothalonil dissipation in gypsum-amended soil

This work focused on the interactive effects of the fungicide chlorothalonil (2,3,4,6-tetrachloro-1,3-benzendicarbonitrile) and gypsum on the persistence of the soil-residual herbicide metolachlor (2-chloro-N-(6-ethyl-o-tolyl)-N-[(1RS)-2-methoxy-1-methylethyl]acetamide). Gypsum application was included due to its widespread use on peanut (Arachis hypogaea). Both agricultural grade gypsum and reagent CaSO₄-2H₂O were tested. A laboratory soil incubation was conducted to evaluate interactive effects. Results indicated 1.5X greater metolachlor half-life (DT₅₀) in soil amended with chlorothalonil (37 d) as compared to control soil (25 d). The two gypsum sources alone increased metolachlor DT₅₀ to about 32 d and with the combination of chlorothalonil and gypsum, DT50 was 50 d, 2-fold greater than the control. Chlorothalonil dissipation was rapid (DT₅₀ < 4d). A possible explanation for metolachlor dissipation kinetics is a build-up of the chlorothalonil intermediate (4-hydroxychlorothalonil) which limited soil microbial activity and depleted glutathione S-transferase (GST) from chlorothalonil detoxification. Further information related to gypsum impacts is needed. Results confirm previous reports of chlorothalonil impeding metolachlor dissipation and showed the gypsum application extended persistence even longer. Farming practices, such as reducing metolachlor application rates, may need to be adjusted for peanut cropping systems where chlorothalonil and gypsum are used.     

Comparison of the Annular Denuder System and the Transition Flow Reactor for Measurements of Selected Dry Deposition Species

An intensive field study was conducted in Research Triangle Park, North Carolina in the fall of 1986. Ambient concentrations of the following constituents were obtained: nitric acid, nitrous acid, nitrogen dioxide, sulfur dioxide, ammonia, hydrogen ion, and particulate nitrate, sulfate, and ammonium. Results collected using the annular denuder system (ADS) and the transition flow reactor (TFR) are presented and compared.

Both types of samplers had operational detection limits on daily (22-hour) samples that were generally below 1 μg m_-3 suggesting that both samplers can provide sensitive measurements for most of the constituents of interest. Both the ADS and TFR show reasonable (>25 percent) within-sampler precision for most of the measured species concentrations, except TFR fine particulate nitrate measurements where results were frequently negative (The TFR fine particulate nitrate measurement is calculated using subtraction of positive numbers).

Comparison of ADS and TFR daily results showed good agreement for total particulate sulfate, the sum of total (coarse plus fine) particulate and gaseous nitrate, and ammonia. As a result of different inlet particle collection efficiencies, the ADS fine particulate sulfate exceeded the TFR (5 percent). In the absence of a filter to collect volatilized particulate ammonium in the ADS, the sum of total particulate and gaseous ammonium in the TFR exceeded that in the ADS. Of potentially more importance, ADS measurements of SO₂ and H⁺ exceeded those of the TFR, while TFR measurements of HNO₃ exceeded those of the ADS. Results of this study suggest that the TFR may provide biased measurements of SO₂, H⁺, HNO₃, and Fine NO₃ ^- that cannot be corrected without modifications to the fundamental design of the sampling system.     

The Importance of Natural Processes in Understanding Ecosystem Change: A Case Study of Limed Lakes

In order to determine what effects human activities have on natural processes, it is important to thoroughly understand those processes. Unfortunately, we know little about what natural processes are operating, and even less about how they have functioned historically. This paper discusses the importance of natural processes in affecting surface water acidification and the necessity for developing quantitative estimates of natural, as well as anthropogenic, contributions to the acidification of surface waters. A review of the literature and the analysis of chemistry data from six limed lakes in New York and Massachusetts have identified a number of possible processes that may play important roles in acidifying surface waters. At present, these processes are poorly understood and require further research. Once we have such knowledge, we will be able to clearly see the effects of human activities on natural processes and modify those activities in ways that will mitigate negative impact in a predictable manner.     

Assessment of Needs for Technical Information in EPA’s Hazardous and Solid Waste Programs

Headquarters managers and Regional staff in the U.S. Environmental Protection Agency’s hazardous and solid waste programs were surveyed to determine priorities for technical information and guidance among EPA Regional staff, state hazardous waste management staff, EPA contractors, and the regulated community. The survey also examined delivery systems effective for EPA Regional staff. The fifteen highest ranked technical needs for RCRA, Superfund, and UST reflect a pervasive interest in hazardous waste remediation. Top priority technical needs focus on establishing cleanup levels, subsurface fate and transport, field monitoring and quality assurance, remedy selection, and most importantly, which remedies work and which do not in specific situations. Technical needs of non- EPA audiences are quite similar to those for EPA field staff. Preferences for technology transfer delivery systems are generally for conventional distribution methods (such as print materials and workshops) rather than electronic or video media. Regional staff report serious problems in utilizing technology transfer because of time constraints, insufficient knowledge of available products, insufficient travel funds, and limited access to and training on computers.     

Recovering CO2 From Large− and Medium-Size Stationary Combustors

This paper summarizes the results of research conducted at Ar-gonne National Laboratory (ANL) to develop and design a novel method for the recovery of CO₂ from flue gases. The basic process concept Involves the combustion of a hydrocarbon fuel using a mixture of oxygen and carbon dioxide (or CO₂ and H₂0) rather than air as the oxidant, which results In a product stream that contains primarily CO₂ and H₂O. This stream Is then dried and conditioned to meet the specifications of the end user, A slip stream of CO₂ (or CO₂, and H₂0) is used as a diluent in the combustion chamberto maintain a flame temperature equivalent to the temperature that would otherwise be obtained using air as an oxidant. The cost-effectiveness of the process in recovering C0₂ is dependent on the scale of the operation, the type of fuel used, the cost of oxygen, and the cost of capital. The sensitivity of the cost of the recovered C0₂ to these variables Is discussed, and a model for estimating the cost of CO₂ recovered using the ANL process Is presented.     

Evidence of degradation of polybrominated biphenyls in soil samples from michigan

Abstract

Soil samples obtained from the former polybrominated biphenyls (PBB) manufacturing site in Michigan were analyzed by gas chromatography and gas chromatography with mass spectrometric detection. The results indicate significant degradation of the PBB residue in the soil sample. The soil sample with the highest concentration of PBB has the greatest degree of degradation. Principal degradation products include 2,3’,4,4’,5‐pentabromo‐biphenyl, 2,2’,4,4’,5‐pencabromobiphenyl and two unidentified tetrabromobiphenyls.

The degradation pattern observed supports a photochemical decomposition mechanism. These degraded residues may be more toxic than the original Firemaster residues. The implications of the results are discussed.