Nickel and sulfur speciation of residual oil fly ashes from two electric utility steam-generating units

Representative duplicate fly ash samples were obtained from the stacks of 400- and 385-MW utility boilers (Unit A and Unit B, respectively) using a modified U.S. Environmental Protection Agency (EPA) Method 17 sampling train assembly as they burned 0.9 and 0.3 wt % S residual (No. 6 fuel) oils, respectively, during routine power plant operations. Residual oil fly ash (ROFA) samples were analyzed for Ni concentrations and speciation using inductively coupled plasma-atomic emission spectroscopy, X-ray absorption fine structure (XAFS) spectroscopy, and X-ray diffraction (XRD). ROFA deionized H2O extraction residues were also analyzed for Ni speciation using XAFS and XRD. Total Ni concentrations in the ROFAs were similar, ranging from 1.3-1.5 wt%; however, stack gas Ni concentrations in the Unit A were 0.990 microg/Nm3 compared with 0.620 microg/Nm3 for Unit B because of the greater residual oil feed rates employed at Unit A to attain higher 400-MW load conditions with a lower heating value oil. Ni speciation analysis results indicated that ROFAs from Unit A contain approximately 3 wt % NiSO4 x xH2O (where x is assumed to be 6 for calculation purposes) and appoximately 4.5 wt% of a Ni-containing spinel compound, similar in composition to (Mg,Ni)(Al,Fe)2O4. ROFAs from Unit B contain on average 2 wt% NiSO4 x 6 H20 and 1.1 wt% NiO. XAFS and XRD analyses did not detect any nickel sulfide compounds, including carcinogenic nickel subsulfide (Ni3S2) (XAFS detection limit is 5% of the total Ni concentration). In addition, XAFS measurements indicated that inorganic sulfate and organic thiophene species accounted for > 97% of the total S in the ROFAs. Unit A ROFAs contained much lower thiophene proportions because cyclone-separated ROFA reinjection is employed on this unit to collect and reburn the larger carbonaceous particles.     

Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures

Waste plastics in the form of two examples of real world municipal solid waste plastics and a simulated mixture of municipal waste plastics were pyrolysed and liquefied under moderate temperature and pressure in a batch autoclave reactor. In addition, the five main polymers which constitute the majority of plastics occurring in European municipal solid waste comprising, polyethylene, polypropylene, polystyrene, polyethylene terephthalate and polyvinyl chloride were also reacted. The plastics were reacted under both a nitrogen (pyrolysis) and hydrogen pressure (liquefaction) and the yield and composition of products are reported. The hydrocarbon gases produced were mainly methane, ethane, propane and lower concentrations of alkene gases. A mainly oil product was produced with the mixed plastic waste with significant concentrations of aromatic compounds, including single ring aromatic compounds. The composition of the oils and gases suggested that there was significant interaction of the plastics when they were pyrolysed and liquefied as a mixture compared to the results expected from reactions of the single plastics.     

Perchlorate retention and mobility in soils

Adsorption and release of perchlorate in a variety of soils, minerals, and other media were studied when the solid media were exposed to low and high aqueous solutions of perchlorate salts. Low level ClO4- exposure was investigated by subjecting triplicate 5.0 g portions of a solid medium (38 different soils, minerals, or dusts) to 25 mL of an aqueous ammonium perchlorate (NH4ClO4) solution containing 670 ng mL(-1) (6.8 microM) perchlorate. This corresponds to a perchlorate-to-soil ratio of 3.4 microg g(-1) (34 nmol g(-1)). At this level of exposure, more than 90% of the perchlorate was recovered in the aqueous phase, as determined by ion chromatography. In some cases, more than 99% of the perchlorate remained in the aqueous phase. In some cases, the apparent loss of aqueous perchlorate was not clearly distinguishable from the variation due to experimental error. The forced perchlorate anion exchange capacities (PAECs) were studied by soaking triplicate 5.0 g portions of the solid media in 250 mL of 0.20 M sodium perchlorate (NaClO4) followed by repeated deionized water rinses (overnight soaks with mixing) until perchlorate concentrations fell below 20 ng mL(-1) in the rinse solutions. The dried residua were leached with 15.0 mL of 0.10 M sodium hydroxide. The leachates were analyzed by ion chromatography and the perchlorate concentrations thus found were subsequently used to calculate the PAECs. The measurable PAECs of the insoluble and settleable residua ranged from 4 to 150 nmol g(-1) (micromol kg(-1)), with most in the 20-50 nmol g(-1) range. In some soils or minerals, no sorption was detectable. The mineral bentonite was problematic, however. Overall, the findings support the widely accepted idea that perchlorate does not appreciably sorb to soils and that its mobility and fate are largely influenced by hydrologic and biologic factors. They also generally support the idea that intrasoil perchlorate content is depositional rather than sorptive. On the other hand, sorption (anion replacement) of perchlorate appears to occur in some soils. Therefore, the measurement of perchlorate in soils requires accounting for ion exchange phenomena; leaching with water alone may give inaccurate results. If perchlorate anion exchange is confirmed to be negligible, then leaching procedures may be simplified accordingly.     

Evaluation of commercial odor control agents for suppressing Escherichia coli in swine manure slurry

Ten commercially available manure odor control agents were evaluated in bench-scale laboratory microcosms for their ability to inhibit or kill Escherichia coli, a commonly used indicator of fecal pollution and a potential pathogen. At manufacturer recommended rates, none of the agents reduced viable populations of E. coli in pure cultures or in swine manure slurry. However, at rates 10-fold higher than those recommended by the manufacturer, EnviroPur rapidly reduced viable populations of E. coli. Accelerated death of E. coli was observed at temperatures as low as 4 degrees C. Chemical analysis of EnviroPur indicated that it contains alkylphenol polyethoxylates, common industrial surfactants. These results suggest that at manufacturer-recommended rates, the odor-controlling agents would not be effective at suppressing E. coli in stored swine manure slurry.     

Estimating the benefits and costs to mountain bikers of changes in trail characteristics,access fees,and site closures: choice experiments and benefits transfer

Mountain biking is an increasingly popular leisure pursuit. Consequences are trail degradation and conflicts with hikers and other users. Resource managers often attempt to resolve these problems by closing trails to mountain biking. In order to estimate the impact of these developments, a model has been devised that predicts the effects of changes in trail characteristics and introduction of access fees, and correlates these with biker preference on trail selection. It estimates each individual's per-ride consumer's surplus associated with implementing different policies. The surplus varies significantly as a function of each individual's gender, budget, and interest in mountain biking. Estimation uses stated preference data, specifically choice experiments. Hypothetical mountain bike trails were created and each surveyed biker was asked to make five pair-wise choices. A benefit-transfer simulation is used to show how the model and parameter estimates can be transferred to estimate the benefits and costs to mountain bikers in a specific area.     

Preliminary comparison of landscape pattern-normalized difference vegetation index (NDVI) relationships to Central Plains stream conditions

We explored relationships of water quality parameters with landscape pattern metrics (LPMs), land use-land cover (LULC) proportions, and the advanced very high resolution radiometer (AVHRR) normalized difference vegetation index (NDVI) or NDVI-derived metrics. Stream sites (271) in Nebraska, Kansas, and Missouri were sampled for water quality parameters, the index of biotic integrity, and a habitat index in either 1994 or 1995. Although a combination of LPMs (interspersion and juxtaposition index, patch density, and percent forest) within Ozark Highlands watersheds explained >60% of the variation in levels of nitrite-nitrate nitrogen and conductivity, in most cases the LPMs were not significantly correlated with the stream data. Several problems using landscape pattern metrics were noted: small watersheds having only one or two patches, collinearity with LULC data, and counterintuitive or inconsistent results that resulted from basic differences in land use-land cover patterns among ecoregions or from other factors determining water quality. The amount of variation explained in water quality parameters using multiple regression models that combined LULC and LPMs was generally lower than that from NDVI or vegetation phenology metrics derived from time-series NDVI data. A comparison of LPMs and NDVI indicated that NDVI had greater promise for monitoring landscapes for stream conditions within the study area.     

Getting of the seeds-and-tools treadmill with CRS seed vouchers and fairs

The free distribution of seeds and tools is the standard approach to agricultural recovery. The predominance of this approach is partly attributable to the: (1) perception that farmer seed quality is poor, (2) insistence on seed certification, (3) promotion of researcher varieties, (4) misdiagnosis of unavailability, (5) difficulty accessing farmer seed, and (6) support for the commercial seed sector. This paper presents a Seed Security Assessment Framework to distinguish among the causes of seed insecurity and focuses on three principal concepts: seed availability; access to seed; and factors associated with seed utilisation. Using this diagnostic framework, Catholic Relief Services (CRS) has developed a better approach to promoting seed system-based agricultural recovery. It involves a combination of seed voucher distribution and the organization of seed fairs, which bring together a range of sellers from whom the holders of vouchers may purchase seed. This approach is advantageous because it: strengthens farmer seed procurement systems; is cost efficient; in economic terms, has a multiplier effect in the community; is straightforward to plan and implement; allows commercial sector participation; provides an opportunity to promote improved varieties for farmer evaluation; brings together different communities.     

Caste and division of labor in leaf-cutter ants (Hymenoptera: Formicidae: Atta)

Summary Leaf cutting was selected for an evaluation of ergonomic efficiency in the fungus-growing ant Atta sexdens because it is performed largely by medias (head width 1.8–2.8 mm), which attend to relatively few other functions and hence are less likely to be evolutionarily compromised by the demands of competing tasks (Fig. 1).Three alternative a priori criteria of evolutionary optimization were envisioned that are consistent with natura selection theory: the reduction of predation by means of defense and evasion during foraging, the minimization of foraging time through skill and running velocity during foraging, and energetic efficiency, which must be evaluated with reference to both the energetic construction costs of new workers and the energetic cost of maintenance of the existing worker force.In order to measure the performance of various size groups within the A. sexdens worker caste in isolation, I devised the pseudomutant technique: in each experiment, groups of foraging workers were thinned out until only individuals of one size class were left outside the nest. Measurements were then made of the rate of attraction, initiative in cutting, and performance of each size group at head-width intervals of 0.4 mm (Figs. 2, 3, and 7). Other needed measurements were made in body weight, oxygen consumption, and running velocity (Figs. 5, 6, and 8).The size-frequency distribution ff leaf cutters in the A. sexdens conforms closely to the optimum predicted by the energetic efficiency criterion for harder forms of vegetation, such as rhododendron leaves. The distribution is optimum with reference to both construction and maintenance costs. The difference between the predicted and actual modal size groups specializing on leaf cutting is 10% or less of the total size range of the sexdens worker caste.A model was next constructed in which attraction and initiative were allowed to evolve genetically to uniform maximum levels. The theoretical maximum efficiency levels obtained by this means were found to reside in the head-width 2.6–2.8 mm size class, or 8% from the actual maximally efficiency class (head width 2.2–2.4 mm). In the activity of leaf cutting, A. sexdens can therefore be said to be not only at an adaptive optimum but also, within at most a relatively narrow margin of error, to have been optimized in the course of evolution.     

Determination of 99Tc, 63Ni and 121m+126Sn in the marine environment

Four artificially produced radionuclides (${}^{99}\text{Tc, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 2·15 × 10}{}^5\text{y;}{}^{63}\text{Ni, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 93 y}$ and ${}^{\mathrm{121m+126}}\text{Sn, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 55·5 y}$) have been analyzed in sediments and organisms from the marine environment. The samples were obtained from the vicinities of nuclear energy facilities, at sites of nuclear weapon tests and at sites remote from both of these locales. The activities of these nuclides per unit dry weight are remarkably similar at the first two of the above areas but are usually detectable only with difficulty, if at all, in the third area. Techniques for sample treatment and measurement are given.