Balance of NH3 and behavior of polychlorinated dioxins and furans in the course of the selective non-catalytic reduction of nitric oxide at the TAMARA waste incineration plant

Investigations were performed on the selective non-catalytic reduction (SNCR) of nitric oxide (NO) at TAMARA, the pilot-scale waste incineration plant of the Karlsruhe Research Center. Aqueous ammonia (NH₃) was injected into the combustion chamber as reductant. The influence of NH₃ on various inorganic and organic compounds in the flue gas was investigated. The concentrations of NO were reduced by up to about 90% by NH₃ injection. The concentrations of most of the other inorganic and organic compounds, including in particular PCDD and PCDF, did not change significantly.     

Combustion of brominated flame retardants and behavior of its byproducts

The substance flow rate of PBDDs/DFs into flue gas and incineration residues from incineration of three types of waste samples containing brominated flame retardants were examined. The samples used consisted of PBDEs (a typical retardant), used TV casing materials (actual waste materials), and waste printed circuit boards. PBDDs/DFs concentrations in the experimental samples of PBDEs/PE, waste TV casing materials and printed circuit boards ranged between 3000 and 130,000 ng/g. These values are very high when compared to other investigations. The increase of chlorine concentration in input sample reduced the ratio of PBDDs/DFs in flue gas and raised the ratio of PCDDs/DFs. With adequate combustion control and flue gas treatment, the amount of PBDDs/DFs released from the incineration of resin containing brominated flame retardants was lower than the input amount. The presence of PBDDs/DFs in incineration residues dominated the total amount of dioxins released. When PBDDs/DFs, PCDDs/DFs and PXDDs/DFs were considered as a total, the total amount released was lower than the total amount input.     

Foliage profiles of individual trees determine competition,self-thinning,biomass and NPP of a Cryptomeria japonica forest stand: A simulation study based on a stand-scale process-based forest model

A simulation study was carried out to investigate simultaneously the effects of eco-physiological parameters on competitive asymmetry, self-thinning, stand biomass and NPP in a temperate forest using an atmosphere–vegetation dynamics interactive model (MINoSGI). In this study, we selected three eco-physiological relevant parameters as foliage profiles (i.e. vertical distribution of leaf area density) of individual trees (distribution pattern is described by the parameter η), biomass allocation pattern in individual tree growth (χ) and the maximum carboxylation velocity (V_max). The position of the maximal leaf area density shifts upward in the canopy with increasing η. For scenarios with η < 4 (foliage concentrated in the lowest canopy layer) or η > 12 (foliage concentrated in the uppermost canopy layer), a low degree of competitive asymmetry was produced. These scenarios resulted in the survival of subordinate trees due to a brighter lower canopy environment when η < 4 or the generation of spatially separated foliage profiles between dominant and subordinate trees when η > 12. In contrast, competition between trees was most asymmetric when 4 ≤ η ≤ 12 (vertically widespread foliage profile in the canopy), especially when η = 8. In such cases, vertically widespread foliage of dominant trees lowered the opportunity of light acquisition for subordinate trees and reduced their carbon gain. The resulting reduction in carbon gain of subordinate trees yielded a higher degree of competitive asymmetry and ultimately higher mortality of subordinate trees. It was also shown that 4 ≤ η ≤ 12 generated higher self-thinning speed, smaller accumulated NPP, litter-fall and potential stand biomass as compared with the scenarios with η < 4 or η > 12. In contrast, our simulation revealed small effects of χ or V_max on the above-mentioned variables as compared with those of η. In particular, it is notable that greater V_max would not produce greater potential stand biomass and accumulated NPP although it has been thought that physiological parameters relevant to photosynthesis such as V_max influence dynamic changes in forest stand biomass and NPP (e.g. the greater the V_max, the greater the NPP). Overall, it is suggested that foliage profiles rather than biomass allocation or maximum carboxylation velocity greatly govern forest dynamics, stand biomass, NPP and litter-fall.     

Core self‐evaluations in Japan: relative effects on job satisfaction,life satisfaction,and happiness

The present study tested, in a non‐Western culture (Japan), the relative validity in predicting job satisfaction, life satisfaction, and happiness of core self‐evaluations (CSE), positive and negative affectivity (PA/NA), and the Neutral Objects Satisfaction Questionnaire (NOSQ). Consistent with previous results in primarily Western cultures, the four lower‐order traits that comprise CSE—self‐esteem, generalized self‐efficacy, locus of control, and neuroticism—indicated a higher‐order factor. While each lower‐order trait was itself related to the study's criteria, the CSE concept displayed in general, higher correlations with the dependent variables, and explained incremental variance in two of the study's three outcomes beyond PA, NA, and the NOSQ. These results indicate initial support for the generalizability of CSE in a culture that differs in many respects from Western cultures, and suggest that judgments of satisfaction and happiness in a non‐Western culture have a dispositional source. Copyright © 2005 John Wiley & Sons, Ltd.     

High durability cementitious material with mineral admixtures and carbonation curing

Nuclear waste repositories need highly durable cementitious materials to function for over thousands of years while resisting leaching and degradation. The durability of cementitious material can be effectively improved by reducing permeability and by changing cement hydrates to a less soluble matrix. This paper describes the properties of carbonated new cementitious materials containing belite-rich cement and gamma-2CaO.SiO2 as main components. In addition, the long-term leaching properties are investigated and compared with ordinary Portland cement by using a predictive leaching model.     

Simultaneous determination of atmospheric sulfur and nitrogen oxides using a battery-operated portable filter pack sampler

We developed a method to analyze atmospheric SO(x) (particulate SO(4)(2-)+ gaseous SO(2)) and NO(x) (NO + NO(2)) simultaneously using a battery-operated portable filter pack sampler. NO(x) determination using a filter pack method is new. SO(x) and NO(x) were collected on a Na(2)CO(3) filter and PTIO (2-phenyl-4,4,5,5-tetramethylimidazoline-3-oxide-1-oxyl) + TEA (triethanolamine) filters (6 piled sheets), respectively. Aqueous solutions were then used to extract pollutants trapped by the filters and the resulting extracts were pre-cleaned (e.g. elimination of PTIO) and analyzed for sulfate and nitrite by ion chromatography. Recoveries of SO(2) and NO(x) from standard pollutant gases and consistency of the field data with those from other instrumental methods were examined to evaluate our method. SO(x) and NO(x) could be analyzed accurately with determination limits of 0.2 ppbv and 1.0 ppbv (as daily average concentrations), respectively. The sampler can determine SO(x) and NO(x) concentrations at mountainous or remote sites without needing an electric power supply.     

Evaporation characteristics of multi-component liquid

Evaporation rate of multi-component liquid such as motor gasoline is expected to change greatly with progress of evaporation because its composition changes. Therefore it is difficult to predict accurately amount of generated combustible vapor in the case that a multi-component liquid is spilt on a floor. Then, we assumed an evaporation model that composition of the vapor obeys the Raoult's law which considers the activity coefficient. Using the model, we calculated the vapor composition, the vapor pressure and the evaporation rate of the liquid. Then, comparison was done between the calculated values and the measured values obtained in this study. “Weight loss fraction” was used as a parameter signifying the progress of evaporation. The variations of the evaporation property were accurately predicted by the model. We derived a prediction model of the amount of generated combustible vapor from the relation between weight loss fraction and evaporation rate. It was found that the amount of generated vapor was expressed as a logarithmic function of time in case of a five-component liquid. Furthermore, we showed that the predicted flash point of a liquid using the composition obtained from the model was in good agreement with an experimental result.     

Improved method for the formation of recycled resins from depolymerized products of waste fiber-reinforced plastics: simple and effective purification of recovered monomers by washing with water

The synthesis of recycled plastics from recovered monomeric materials obtained from the depolymerization reaction of fiber-reinforced plastics (FRP) was examined. The depolymerization reaction of FRP in the presence of N,N-dimethylaminopyridine (DMAP) smoothly yielded the corresponding monomers, which mainly consisted of dimethyl phthalates. The polymerization reaction with this monomer failed to form the corresponding unsaturated polyesters due to contamination by N-methyl-4-pyridone, a decomposition product of DMAP. An efficient purification of the recovered monomer was achieved by washing with water, and the purified monomer successfully yielded the corresponding polymers. A hardness test revealed that the polymers were as hard as the polyester made from virgin materials. The present modification provides a practical method for the preparation of recycled plastics from depolymerized plastics.     

Hydrothermal treatment of MSWI bottom ash forming acid-resistant material

To recycle municipal solid waste incinerator (MSWI) bottom ash, synthesis of hydrothermal minerals from bottom ash was performed to stabilize heavy metals. MSWI bottom ash was mixed with SiO(2), Al(OH)(3), and Mg(OH)(2) so its chemical composition was similar to that of hydrothermal clay minerals. These solid specimens were mixed with water at a liquid/solid ratio of 5. The reaction temperature was 200 degrees C, and reactions were performed for 24-240h. Generation of kaolinite/smectite mixed-layer clay mineral was found in the samples after the reaction of the mixture of bottom ash, SiO(2), and Mg(OH)(2). Calcium silicate hydrate minerals such as tobermorite and xonotlite were also generated. X-ray powder diffraction suggested the presence of amorphous materials. Leaching tests at various pHs revealed that the concentration of heavy metals in the leachates from MSWI bottom ash hydrothermally treated with SiO(2) and Mg(OH)(2) was lower than that in leachates from non-treated bottom ash, especially under acid conditions. Hydrothermal treatment with modification of chemical composition may have potential for the recycling of MSWI bottom ash.     

Surrogate study for dioxins from municipal waste incinerator in startup condition: applicability as a dioxin control indicator and an organohalogen emission warning

Dioxins and their surrogates were continuously monitored during the startup of two municipal waste in cinerators (MWIs). The surrogates studied included low-volatility organohalogen compounds (LVOH) sampled by online systems, as well as chlorobenzenes (CBs) and chlorophenols (CPs). The changes in levels of LVOH, CBs, and CPs corresponded well with the trend of the toxicity equivalent quantity (TEQ). The correlation of LVOH with TEQ was fairly good, whereas that of CBs and CPs with TEQ was not consistent. The correlation of LVOH with TEQ involved a memory effect related to the delayed emission of less volatile compounds. The isomer analysis of the dioxins present under startup conditions showed evidence of the memory effect, i.e., highly chlorinated isomers were emitted slowly, whereas low-chlorinated isomers and LVOH decreased rapidly as the temperature rose. LVOH cannot act as a perfect dioxin surrogate, but it can give a versatile, quick, and comprehensive warning of the presence of organohalogen compounds because it is free from the memory effect and covers many kinds of organohalogen compounds, including dioxins.