Future climate and adverse health effects caused by fine particulate matter air pollution: case study for Poland

Ground level air pollution, especially fine particulate matter (PM_2.5), has been associated with a number of adverse health effects. The dispersion of PM_2.5 through the atmosphere depends on several mutually connected anthropogenic, geophysical and meteorological parameters, all of which are affected by climate change. This study examines how projected climate change would affect population exposure to PM_2.5 air pollution in Poland. Population exposure to PM_2.5 in Poland was estimated for three decades: the 1990s, 2040s and 2090s. Future climate conditions were projected by Regional Climate Model RegCM (Beta), forced by the general atmospheric circulation model ECHAM5. The dispersion of PM_2.5 was simulated with chemical transport model CAMx version 4.40. Population exposure estimates of PM_2.5 were 18.3, 17.2 and 17.1 μg/m³ for the 1990s, 2040s and 2090s, respectively. PM_2.5 air pollution was estimated to cause approximately 39,800 premature deaths in the population of Poland in the year 2000. Our results indicate that in Poland, climate change may reduce the levels of exposure to anthropogenic particulate air pollution in future decades and that this reduction will reduce adverse health effects caused by the air pollution.     

Restoring the plant productivity of heavy metal-contaminated soil using phosphate sludge, marble waste, and beneficial microorganisms

Assisted natural remediation (ANR) has been highlighted as a promising, less expensive, and environmentally friendly solution to remediate soil contaminated with heavy metals. We tested the effects of three amendments (10% compost, C; 5 or 15% phosphate sludge, PS5 and PS15; and 5 or 15% marble waste, MW5 and MW15) in combination with microorganism inoculation (rhizobacteria consortium alone, mycorrhizae alone, and the two in-combination) on alfalfa in contaminated soil. Plant concentrations of Zn, Cu, and Pb were measured, along with proline and malondialdehyde production. The microbiological and physicochemical properties of the mining soil were evaluated. Application of the amendments allowed germination and promoted growth. Inoculation with the rhizobacteria consortium and/or mycorrhizae stimulated plant growth. PS and MW stimulated the production of proline. Inoculation of alfalfa with the rhizobacteria-mycorrhizae mixture and the application of MW allowed the safe cultivation of the legume, as shown by the low concentrations of metals in plant shoots. Zn and Pb concentrations were below the limits recommended for animal grazing and accumulated essentially in roots. Soil analyses showed the positive effect of the amendments on the soil physicochemical properties. All treatments increased soil pH (around 7), total organic carbon, and assimilable phosphorus content. Notably, an important decrease in soluble heavy metals concentrations was observed. Overall, our findings revealed that the applied treatments reduced the risk of metal-polluted soils limiting plant growth. The ANR has great potential for success in the restoration of polymetallic and acidic mining soils using the interaction between alfalfa, microorganisms, and organo-mineral amendments.     

Immune responses,DNA damage and ultrastructural alterations of gills in the marine mussel Lithophaga lithophaga exposed to CuO nanoparticles

Environmental Science and Pollution Research - Nanoparticle (NP) pollution is a worldwide problem. Copper oxide nanoparticles (CuO NPs) are one of the most used NPs in a variety of applications,...     

Effectiveness of potassium ferrate (VI) as a green agent in the treatment and disinfection of carwash wastewater

Environmental Science and Pollution Research - Carwash wastewater treatment with potassium ferrate (VI) (K2FeO4) was optimized by response surface methodology. The optimum conditions for chemical...     

The detoxifying effect of Polygonum equisetiforme extracts against dichlorvos (DDVP)-induced oxidative stress and neurotoxicity in the commercial clam Ruditapes decussatus

Environmental Science and Pollution Research - Effects of Polygonum equisetiforme extracts against dichlorvos were investigated in the commercial clam Ruditapes decussatus. The toxicity of this...     

Performance characteristics of sequential separation and quantification of lead-210 and polonium-210 by ion exchange chromatography and nuclear spectrometric measurements

A selective separation and quantitative determination procedure for 210Pb and 210Po in various environmental matrices from different sources such as IAEA-326 soil, phosphate rocks (PR), and phosphogypsum (PG) was developed. The tested samples were digested sequentially using concentrated mineral acids (HF, HNO3) by a programmable high-pressure microwave digestion system. The sample solution was loaded onto a preconditioned ion exchange column (Sr-resin) for chromatographic separation. Polonium-210 was eluted by 6 M HNO3 then spontaneously deposited onto polished silver discs to be measured using low-background alpha spectrometry. Lead-210 was sequentially eluted using 6 M HCl solution, precipitated as lead oxalate, dissolved in HNO3 solution, and mixed with scintillation cocktail to be measured by liquid scintillation counting (LSC). Performance of the developed procedure was tested using a reference soil (IAEA-326), with recommended isotope values, that was used as a quality control to assess separation and quantification efficiency (recovery %). The minimum detectable activities of 210Pb and 210Po were found to be 24 and 0.28 Bq kg(-1) for the measurements using LSC and alpha spectrometry, respectively. The recoveries (%) of 210Pb and 210Po were found to be 80 and 60%, respectively. To test the validity of the proposed LSC method, a comparative study was performed by measuring 210Pb activity concentration in test samples by nondestructive gamma-ray spectrometry.     

A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.     

Organochlorine contaminants in the Vistula Lagoon sedimentation zone as possible source of lagoon recontamination

The presented results include decade of monitoring of the Vistula Lagoon waters and have been supplemented by the determination of chlorinated compounds, as well as on concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the sedimentation zone. Monitoring of river waters entering the Polish part of the lagoon and the lagoon waters confirmed the presence of plant protection chemical; the largest contributors has lindane (34%) and DDT_total (21%); the same as for sediments were dominate lindane (19%) and DDT_total (14%) within pp-DDT isomer dominate (13%). In the lagoon water, PCDD/Fs were determined within a range of 1.5–5.6 ng dm^?3, leading to average toxicity of 0.18?±?0.13 ng TEQ·dm^?3. In sediments, their concentrations fell within a range of 22.7–405.7 ng kg^?1 dw and the average toxicity of the lagoon sediments was set at 5.00?±?1.98 ng TEQ·kg^?1 dw. Both in water and sediments, the greatest share among PCDD/Fs has octa-chlorodibenzodioxin. Due to the hydromorphological conditions of the lagoon, the waters are mixed to the bottom causing the surface layer of sediment to become remobilized—this is suggested as the key factor when it comes to water recontamination and increased access of POPs to marine organisms.     

Characterization of phosphate rock and phosphogypsum from Gabes phosphate fertilizer factories (SE Tunisia): high mining potential and implications for environmental protection

Environmental Science and Pollution Research - Since the establishment of the coastal industrial complex in Gabes city (Gulf of Gabes, SE Tunisia), hundred million tons of untreated phosphogypsum...     

Honeybees (<Emphasis Type="Italic">Apis mellifera</Emphasis>) as a biological barrier for contamination of honey by environmental toxic metals

The aim of the study was to investigate the transfer of toxic metals from honeybee workers (Apis mellifera L.) to bee honey in relation to the ecological state of the environment. The materials of the study consisted of samples of honeybee bodies and varietal honeys taken from the same apiary located in three areas: R1—urbanized (16), R2—ecologically clean (16) and R3—industrialized (15) of south-eastern Poland. The contents of 14 elements in all tested samples, including toxic metals (Cd, Pb, Hg, Al, Ni, Tl) as well as bioelements (K, Mg, Ca, Mn, Fe, Zn, Cu, Se), were analysed by the ICP-OES method with prior microwave mineralization. The concentrations of the majority of the studied elements, excluding aluminum and lead, were significantly higher in bee bodies than in honey samples (P?<?0.05). The pollution of bee bodies by toxic metals was dependent on the environmental cleanliness, and the most pollution was observed in the industrialized area. The bee body was the most effective barrier for Cd and Tl transfer to the honey, while the level of Ni was similar in both tested materials. The Al concentration was significantly higher in honey than bee bodies (14.81?±?24.69 and 6.51?±?5.83 mg kg^?1, respectively), which suggests the possibility of secondary contamination of honey. The greatest sensitivity to heavy metal pollution was observed in honeydew honey compared to nectar honeys (P?<?0.05). It was proved for the first time that bees work as biofilters for toxic metals and prevent honey contamination.