Environmental risk assessment of cobalt and manganese from industrial sources in an estuarine system

A total of 74 samples of soil, sediment, industrial sludge, and surface water were collected in a Mediterranean estuarine system in order to assess the potential ecological impact of elevated concentrations of Co and Mn associated with a Terephthalic (PTA) and Isophthalic (PIPA) acids production plant. Samples were analyzed for elemental composition (37 elements), pH, redox potential, organic carbon, and CaCO₃ content, and a group of 16 selected samples were additionally subjected to a Tessier sequential extraction. Co and Mn soil concentrations were significantly higher inside the industrial facility and around its perimeter than in background samples, and maximum dissolved Co and Mn concentrations were found in a creek near the plant’s discharge point, reaching values 17,700 and 156 times higher than their respective background concentrations. The ecological risk was evaluated as a function of Co and Mn fractionation and bioavailability which were controlled by the environmental conditions generated by the advance of seawater into the estuarine system during high tide. Co appeared to precipitate near the river mouth due to the pH increase produced by the influence of seawater intrusion, reaching hazardous concentrations in sediments. In terms of their bioavailability and the corresponding risk assessment code, both Co and Mn present sediment concentrations that result in medium to high ecological risk whereas water concentrations of both elements reach values that more than double their corresponding Secondary Acute Values.     

Feasibility of incorporating treated lignins in fiberboards made from agricultural waste

This paper studies the feasibility of incorporating treated lignins in fiberboards made from Vitis vinifera as an agricultural waste. The treated lignins are the purified Kraft lignin and the alkaline hydrolyzed Kraft lignin. V. vinifera raw material and its fibers were characterized in terms of chemical composition and the results were compared to other biomass species. The chemical composition of treated lignins shows that they have high purity compared to the lignin raw material. The lignin-V. vinifera fibreboards were produced on laboratory scale by adding powdered treated lignins to the material that had previously been steam exploded. Some of the important properties of fibreboards prepared using the treated lignins as natural adhesives were evaluated. These properties were density, thickness swelling, water absorption, modulus of elasticity, modulus of rupture, internal bond strength. The explored levels of treated lignins vary from 5% to 20%. The results showed that binderless fibreboards, fibreboards made from V. vinifera fibers and alkaline hydrolyzed Kraft lignin have weaker mechanical properties. However, the fibreboards obtained using purified Kraft lignin have good mechanical and water resistance properties which satisfy the requirements of the relevant standards specifications.     

Stability studies of cholesterol lowering statin drugs in aqueous samples using HPLC and LC–MS

In this study, stability of statin drugs in different conditions, such as various pH, diverse solvents ratio, presence of UV, and sunlight have been investigated. Results suggest strong dependence of statins upon pH, potential environmental persistence towards sun light, and UV light degradation via singlet excited state obtained by excitation into the π–π* band. In acidic conditions interconversion between lactone and hydroxy acid forms in aqueous solutions at room temperature is retarded, while for the same sun-exposed samples are accelerated. Longer exposures lead to the degradation processes. Statin interconversion in water is much lower than in acetonitrile.     

A roadmap for the conservation of freshwater mussels in Europe

Europe has a long history of human pressure on freshwater ecosystems. As pressure continues to grow and new threats emerge, there is an urgent need for conservation of freshwater biodiversity and its ecosystem services. However, whilst some taxonomic groups, mainly vertebrates, have received a disproportionate amount of attention and funds, other groups remain largely off the public and scientific radar. Freshwater mussels (Bivalvia, Unionida) are an alarming example of this conservation bias and here we point out six conceptual areas that need immediate and long-term attention: knowledge, threats, socioeconomics, conservation, governance and education. The proposed roadmap aims to advance research, policy and education by identifying the most pressing priorities for the short- and long-term conservation of freshwater mussels across Europe.     

Evolution of iron speciation during hydration of C4AF

It is now well accepted and demonstrated that calcium silicate, calcium aluminate and calcium sulfo aluminate (ettringite, AFm) phases exhibit a good capability to fix metals and metalloids. Unfortunately the role of minor phases and especially calcium-ferric aluminate phase, shorthand C4AF is not well defined. In other systems like in soils or sediments iron phases play a key role in the fixation of pollutant. In cement sorption isotherms, indicated that various metals can be retained by the C4AF hydrated products. Therefore the capabilities of those phase to retain heavy metal should not be neglected. Previous investigations have shown that the minerals formed during the hydration of C4AF are similar to those formed from C3A (pure tri-calcium aluminate) under comparable conditions. Nevertheless no investigation was conducted at the molecular level and there is still a controversy whether Fe substitutes for Al in the hydrated minerals in whole or in part, or if it forms FeOOH clusters scattered throughout the matrix. In this context we have conducted XAS experiments using synchrotron radiation. It was found that the hydration of C4AF forms C3AH6 (hydrogarnet) in which Fe randomly substitutes for Al as well as an amorphous FeOOH phase. Intermediate products like AFm (i.e., an ill organized lamellar phase) are also formed but rapidly evolve to C3AH6; iron does not seem to be incorporated in the AFm structure.     

Enhanced photocatalytic activities of silicon nanowires/graphene oxide nanocomposite: Effect of etching parameters

Homogeneous and vertically aligned silicon nanowires (SiNWs) were successfully fabricated using silver assisted chemical etching technique. The prepared samples were characterized using scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Photocatalytic degradation properties of graphene oxide (GO) modified SiNWs have been investigated. We found that the SiNWs morphology depends on etching time and etchant composition. The SiNWs length could be tuned from 1 to 42 µm, respectively when varying the etching time from 5 to 30 min. The etchant concentration was found to accelerate the etching process; doubling the concentrations increases the length of the SiNWs by a factor of two for fixed etching time. Changes in bundle morphology were also studied as function of etching parameters. The SiNWs diameter was found to be independent of etching time or etchant composition while the size of the SiNWs bundle increases with increasing etching time and etchant concentration. The addition of GO was found to improve significantly the photocatalytic activity of SiNWs. A strong correlation between etching parameters and photocatalysis efficiency has been observed, mainly for SiNWs prepared at optimum etching time and etchant concentrations of 10 min and 4:1:8. A degradation of 92% was obtained which further improved to 96% by addition of hydrogen peroxide. Only degradation efficiency of 16% and 31% has been observed for bare Si and GO/bare Si samples respectively. The obtained results demonstrate that the developed SiNWs/GO composite exhibits excellent photocatalytic performance and could be used as potential platform for the degradation of organic pollutants.     

Radiometric and environmental impacts of mill tailings at experimental plant processing unit,Allouga, Egypt

Abstract

Uranium mining and ore processing are known to be harmful to the environment and human health if the waste generated is not managed properly. The aim of the present study is to determine the radiological indices in the mill tailings and review the possible attempts to utilize and minimize its hazardous effect. The activity concentrations of natural radionuclides, ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K have been measured by gamma spectrometry using HP-Ge detector. The average activity concentrations of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K in the tailings wastes were 2071.8, 59.92, 6921.262, and 445. 57?Bq/kg respectively which are higher than the international average limit. The ranges of hazard indices such as Radium equivalent activity (Ra_eq), external hazard index (H_ex), internal hazard index (H_in), γ-radiation hazard index I_γ, Dose rate (nGy/h) and annual effective dose equivalent (AED), were estimated. Uraniumm isotopic ratios in the ore –material and mill tailing samples indicate migration out of radionuclides to the surrounding environment causing contamination and many dangerous diseases. Fairly, all investigated tailing waste samples do not satisfy the universal standards, the studied wastes relatively still have high uranium contents and need reprocessing.     

Assessment of the disposition of chiral polychlorinated biphenyls in female mdr 1a/b knockout versus wild-type mice using multivariate analyses

Polychlorinated biphenyls (PCBs) are present in the environment as complex mixtures, which make it challenging to identify PCB congeners that may be subject to active transport processes. Here we employ a transgenic mouse model in combination with multivariate analyses to investigate if chiral PCBs 91, 95, 132, 136, 149, 174, 176 and 183 are subject to active (enantioselective) transport by multidrug resistance (MDR) transporters. A synthetic PCB mixture containing these congeners was administered orally to female FVB or mdr1a/1b knockout mice. Due to the short half-life of chiral PCB congeners, mice were euthanized after 24 h and PCB concentrations and enantiomeric fractions were determined in selected tissues and excreta. Principal component analysis did not reveal differences between wild-type and mdr1a/1b knockout mice. However, Hotelling T²-test revealed significantly lower PCB concentrations and a more pronounced enantiomeric enrichment in the adipose tissue of mdr1a/1b knockout mice. These differences are due to higher body weights and higher fecal fat contents of mdr1a/1b knockout mice. Analysis of the enantiomeric fractions of PCBs 91, 95, 136, 149 and 174 showed a significant enantiomeric enrichment for all five congeners in wild-type and mdr1a/1b knockout mice. Overall, by studying a PCB mixture in a transgenic mouse model in combination with a multivariate data reduction approach, PCBs 91, 95, 136, 149 and 174 could be excluded as substrates of multidrug resistance transporters 1a/b.     

Plutonium, 137Cs and 90Sr in selected invertebrates from some areas around Chernobyl nuclear power plant

Results are presented for ¹³⁷Cs, ⁹⁰Sr and plutonium activity concentrations in more than 20 samples of terrestrial invertebrates, including species of beetles, ants, spiders and millipedes, collected in the highly contaminated area of the Chernobyl exclusion zone. The majority of samples were collected in Belarus, with some also collected in the Ukraine. Three other samples were collected in an area of lower contamination. Results show that seven samples exceed an activity concentration of 100 kBq/kg (ash weight - a.w.) for ¹³⁷Cs. The maximum activity concentration for this isotope was 1.52 ± 0.08 MBq/kg (a.w.) determined in ants (Formica cynerea). Seven results for ⁹⁰Sr exceeded 100 kBq/kg (a.w.), mostly for millipedes. Relatively high plutonium activity concentrations were found in some ants and earth-boring dung beetles. Analyses of activity ratios showed differences in transfer of radionuclides between species. To reveal the correlation structure of the multivariate data set, the Partial Least-Squares method (PLS) was used. Results of the PLS model suggest that high radiocesium activity concentrations in animal bodies can be expected mainly for relatively small creatures living on the litter surface. In contrast, high strontium activity concentrations can be expected for creatures which conduct their lives within litter, having mixed trophic habits and a moderate lifespan. No clear conclusions could be made for plutonium.     

Prediction of the PCDD/F and dl-PCB 2005-WHO-TEQ content based on the contribution of six congeners: Toward a new screening approach for fish samples?

Current European Union regulation regarding polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in food and feed is based on Toxic Equivalent Quotient (TEQ) concept. For confirmatory purpose, the isotope-dilution method associated to a measurement by gas chromatography coupled with high resolution mass spectrometry is usually the method of choice for precisely measuring the 29 target congeners in three separated fractions. Time and cost related to these analyses are very significant. Various kinds of screening concepts can be considered. In the present study, we elaborated and validated a prediction model for the 2005 World Health Organization TEQ in fish, based on the measurement of 4 PCDD/F and 2 non-ortho dl-PCB congeners, potentially analyzable in a single extracted fraction by gas chromatography coupled with mass spectrometry. Large independent datasets have been used for model elaboration (n = 108) and validation (n = 363, n = 357 and n = 6).