The evolution of December 2004 tsunami deposits: Temporal and spatial distribution of potentially toxic metalloids

The article presents the results of research into the content of metalloid fractions in the tsunami deposits from southern Thailand. The following fractions, which are potentially most easily released from deposits to the environment, have been distinguished: the water soluble fraction, the exchangeable fraction extracted with the phosphate buffer and the fraction eluted with the solution of hydrochloric acid. The analytical technique atomic absorption spectrometry with hydride generation was applied. Spatial variability of the metalloid fractions in deposits and changes occurring in deposits over a period of several years of observation were determined. Based on the statistical analysis of the results, an attempt was made to determine the post-depositional release of deposits components to the environment. Based on the conducted research, the 4 years forming process of the arsenic, antimony and selenium occurrence after the deposition of sediments on land were described, as well as the balance in the amount of deposit components released to the environment.     

Distribution and ecological risk of organochlorine pesticides and polychlorinated biphenyls in sediments from the Mediterranean coastal environment of Egypt

Organochlorine contamination in the Mediterranean coastal environment of Egypt was assessed based on 26 surface sediments samples collected from several locations on the Egyptian coast, including harbors, coastal lakes, bays, and estuaries. The distribution and potential ecological risk of contaminants is described. Organochlorine compounds (OCs) were widely distributed in the coastal environment of Egypt. Concentrations of PCBs, DDTs, and chloropyrifos ranged from 0.29 to 377 ng g⁻¹ dw, 0.07 to 81.5 ng g⁻¹ dw, and below the detection limit (DL) to 288 ng g⁻¹ dw, respectively. Other organochlorinated pesticides (OCP) studied were 1–2 orders of magnitude lower. OCP and PCBs had higher concentrations at Burullus Lake, Abu Qir Bay, Alexandria Eastern Harbor, and El Max Bay compared to other sites. OCP and PCB contamination is higher in the vicinity of possible input sources such as shipping, industrial activities and urban areas. PCB congener profiles indicated they were derived from more than one commercially available mixture. The ratios of commercial chlordane and heptachlor metabolites indicate historical usage; however, DDT and HCHs inputs at several locations appear to be from recent usage. The concentrations of PCBs and DDTs are similar to those observed in sediments from coastal areas of the Mediterranean Sea. Ecotoxicological risk from DDTs and PCBs is greatest in Abu Qir Bay, Alexandria Harbor, and El-Max Bay.     

Photocatalytic and combined anaerobic-photocatalytic treatment of textile dyes

A photocatalytic process based on immobilized titanium dioxide was used to treat crude solutions of azo, anthraquinone and phthalocyanine textile dyes. In addition, the process was applied to the treat autoxidized chemically reduced azo dyes, i.e. representatives of recalcitrant dye residues after biological sequential anaerobic-aerobic treatment. Photocatalysis was able to remove more than 90% color from crude as well as autoxidized chemically reduced dye solutions. UV-absorbance and COD were also removed but to a lower extent (50% in average). The end products of photocatalytic treatment were not toxic toward methanogenic bacteria. The results demonstrate that photocatalysis can be used as a pre- or post-treatment method to biological anaerobic treatment of dye-containing textile wastewater.     

NMR study of the humification process during sewage sludge treatment

Humic acids, extracted from sludge at the biologic-mechanical sewage treatment plant in Jastrzebie Zdroj, have been investigated by means of (1)H, (13)C and (31)P NMR spectroscopy. Sludge samples for studies were taken from the primary settling tank, the nitrification chamber, the digestion chamber and the sludge drying beds. The (1)H NMR analysis of humic acid extracted from sludge at various stages of sewage treatment confirmed the presence of the functional groups that are characteristic for humic substances, and the analysis showed changes in their relative intensities. The (13)C NMR indicated that the aromatisation of the humic acid increased during sewage treatment. Moreover, the analysis of the (31)P NMR spectra allowed us to observe the changes in the phosphorus groups of the studied humic acids.     

Co-combustion of dried sewage sludge and coal in a pulverized coal boiler

More than 1.1 million tons of municipal and industrial sewage sludge is produced annually in Poland. Most of this sewage sludge is landfilled or used for recultivation and fertilization of soil. After accession of Poland to the EU, large investments are planned for wastewater treatment, so it is expected that the amount of sewage sludge produced in Poland will grow in the near future. It is well known that the combustion of sewage sludge is becoming a more and more popular utilization method of such waste. Unfortunately, the current situation in Poland makes it impossible to incinerate the sewage sludge because of a lack of incinerators. One possible solution for Poland is the co-firing of dried sewage sludge in existing coal-fired utility boilers. This article presents results of initial Polish industrial trials of dried municipal sewage sludge and hard coal co-combustion in an OP-230 pulverized coal boiler. Such a solution was shown to be technically viable and not to require changes to the existing technological system. Cocombustion of sewage sludge with coal in power plants seems to be the best solution for sludge utilization in the near future in Poland.     

Differences in the Spatial Distribution and Chemical Composition of PM10 Between the UK and Poland

The Fine Resolution Atmospheric Multi-pollutant Exchange Model was used to calculate the spatial distribution and chemical composition of PM₁₀ concentrations for two geographically remote countries in Europe—the UK and Poland—for the year 2007. These countries are diverse in terms of pollutant emissions as well as climate conditions. Information on the contribution of natural and anthropogenic as well as national and imported particles in total PM₁₀ concentrations in both countries is presented. The paper shows that the modelled national annual average PM₁₀ concentrations, calculated for the entire country area, are similar for the UK and Poland and close to 12 μg m^?3. Secondary inorganic aerosols dominate the total PM₁₀ concentrations in Poland. Primary particulate matter has the greatest contribution to total PM₁₀ in the UK, with large contribution of base cations. Anthropogenic sources predominate (81 %) in total PM₁₀ concentrations in Poland, whereas natural prevail in the UK—hence, the future reduction of PM₁₀ air concentrations by emissions reduction could be more difficult in the UK than in Poland.     

Heavy metal contamination from mining sites in South Morocco: Monitoring metal content and toxicity of soil runoff and groundwater

The aim of the present work is the assessment of metal toxicity in runoff, in their contaminated soils and in the groundwater sampled from two mining areas in the region of Marrakech using a microbial bioassay MetPLATE™. This bioassay is based on the specific inhibition of the β-galactosidase enzyme of a mutant strain of Escherichia coli, by the metallic pollutants. The stream waters from all sampling stations in the two mines were all very toxic and displayed percent enzyme inhibition exceeding 87% except SWA₄ and SWB₁ stations in mine C. Their high concentrations of copper (Cu) and zinc (Zn) confirm the acute toxicity shown by MetPLATE. The pH of stream waters from mine B and C varied between 2.1 and 6.2 and was probably responsible for metal mobilization, suggesting a problem of acid mine drainage in these mining areas. The bioassay MetPLATE™ was also applied to mine tailings and to soils contaminated by the acidic waters. The results show that the high toxicity of these soils and tailings was mainly due to the relatively concentration of soluble Zn and Cu. The use of MetPLATE™ in groundwater toxicity testing shows that, most of the samples exhibited low metal toxicity (2.7–45.5% inhibition) except GW3 of the mine B (95.3% inhibition during the wet season and 82.9% inhibition during the dry season). This high toxicity is attributed to the higher than usual concentrations of Cu (189 μg Cu l⁻¹) and Zn (1505 μg Zn l⁻¹). These results show the potential risk of the contamination of different ecosystems situated to the vicinity of these two metalliferous sites. The general trend observed was an increase in metal toxicity measured by the MetPLATE with increasing total and mobile metal concentrations in the studied matrices. Therefore, the MetPLATE bioassay is a reliable and fast bioassay to estimate the metals toxicity in the aquatic and solids samples.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Levels, distribution, and risk assessment of organochlorines in surficial sediments of the Red Sea coast, Egypt

The analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in surficial sediment samples collected from 17 locations along with the coast of the Red Sea in Egypt were carried out using gas chromatography–mass spectrometry. Several potential organic contaminants from agricultural (e.g., DDT and its breakdown products, lindane, endrin, dieldrin, and endosulfan) and industrial (PCBs) sources were measured. The levels of 20 organochlorine pesticides (OCPs) and ten PCB congeners in sediment collected from 17 stations along ~1,200 km were investigated. Concentrations of PCBs, HCHs, DDTs, and cyclodienes ranged from 0.40 to 6.17, 0.01 to 0.09, n.d. to 0.46, and 0.08 to 0.90 ppb dry weight. Two statistical programs were applied on the data (principal component analysis, PCA, and cluster analysis, CA), and it was concluded that it is impossible to predict the distribution patterns of the OCPs in a contaminated area. Risk assessment of the organochlorines contaminated in the sediments of the studied area was investigated.