Applying physicochemical approaches to control phosphogypsum heavy metal releases in aquatic environment

One of the most important sources of solid waste in the Mediterranean Basin ecosystem originated from the phosphate fertilizer industries, which discharge phosphogypsum (PG) directly into aquatic environments or are stacked on stockpiles. The present study investigates metal release from PG under the influence of variable pH, increasing PG mass content, and complexing organic matter ligands. Major ions from PG leachates, grain size and charge, main functional groups along with metal leachability (Pb, Cd, Cr, Cu, and Zn) were determined using ion chromatography, laser diffraction, zetameter, Fourier transform infrared spectroscopy, and atomic absorption spectroscopy, respectively. The complete dissolution of PG recorded is at 2 g/L. Saturation and supersaturation with respect to PG may occur at concentrations of 3 and 4 g/L, respectively, revealing a clustering phenomenon leading to heavy metal encapsulation within the aggregates. Organic ligands such as citrate may trigger the cationic exchange within the PG suspension leading to ion release. As these factors are considered as specific process involving the release of contaminants from PG during storage under natural conditions, this study could set the foundations for PG remediation in aquatic environment. Organic ligands under controlled pH conditions could be utilized in treating fertilizer industrial wastes by taking into consideration the particularity of the receiving area, thus decreasing metal hazardous impact on natural media.     

APCA Honors Five Individuals and Three Sections In 1988 Awards Program

The aim of this study was to analyze the incidence of fungi in the chapel crypt. The MAS 100 was used to monitor the air pollution. The lowest numbers of fungal colonies were isolated at the entrance to the cemetery (2400 CFU/m3). The outside temperature ranged from 24.5oC to 28.1oC, and relative humidity was between 35.3% and 46.4 %. The highest of fungal colonies from air samples at baseline were isolated inside the crypt when coffin was opened (4820 CFU/m3). The temperature in the crypt at baseline varied between 19.6°C and 25.6°C and humidity was between 50.8% and 60.1%. The number of fungal colonies increased significantly at the end of the study. Ten species of fungi were isolated from air samples inside and outside the chapel, and seven species of fungi were isolated on the surface of the exterior and interior of the chapel. Thirteen types/species of fungus were isolated from air samples collected in the crypt; 15 species of fungi were isolated on the walls, surface of the coffin, bones and other objects. Assessment of fungi in the air samples and different surfaces of the crypt, it revealed very high levels of molds in the air samples.

Implications: Assessment of fungi in the air samples and different surfaces of the crypt revealed high levels of molds in the air samples. Fungal numbers within the crypt exceed recommended limits for occupational exposure. Employees working in the crypts should know about these hazards.     

Preparation and Properties of Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) Blends Induced by Gamma Irradiation

Carboxymethyl Cellulose (CMC)/Sodium alginate (SA) blends have been prepared by casting solution method. The effect of different irradiation doses (2.5, 5, 10, 15, and 20 kGy) of gamma rays on the physical properties of the CMC/SA blend containing different ratios of SA (20, 30, and 40 %) such as gel fraction (%) and swelling (%) of CMC/SA blends were investigated. It was found that the gel fraction increases with increasing irradiation dose up to 20 kGy while the swelling of CMC/SA blend films tends to increase with increasing SA content and reduced with increasing irradiation doses. Mechanical and thermal properties of the blend films were improved when CMC content increased and with increasing irradiation dose up to 20 kGy. Morphology of the blend was examined by SEM, which indicates compatibility between CMC and SA. The blend rich in SA content possessed good antimicrobial activity against Gram +ve Bacteria (Bacillus subtilis).     

Climatic drivers of potential hazards in Mediterranean coasts

This paper studies climatic drivers (air and water temperature, precipitation rates, river discharge, sea level and storm patterns) in four Mediterranean regions: the Catalan-Valencia Coast (Spain), the Oran (Algeria) and Gabès (Tunisia) Gulfs and the western Nile Delta (Egypt). The paper also considers the potential hazards that these drivers can induce. It first analyses climatic trends in the drivers, taking into account the available time series of recorded and simulated meteo-oceanographic data from different sources. Next, it presents the general framework to assess biogeophysical hazards (flooding, erosion, droughts and water quality), followed by a simple and yet robust evaluation of those hazards for the four studied coastal sites. Assuming climate change projections under different scenarios and considering the observed trends in drivers, the resulting erosion rates due to sea-level rise and wave storm effects have been estimated. The Nile and Ebro Deltas, together with the Oran Gulf, are more vulnerable than the Gulfs of Valencia and Gabès. Regarding water quality in terms of (a) precipitation and dissolved oxygen in the water column and (b) sea surface temperature, the results show that the most vulnerable zones for the projected conditions (a) are the Gulfs of Oran, Valencia and Gabès, while the Nile Delta is the region where the decrease in water quality will be less pronounced. For the projected conditions (b), the most vulnerable zone is the Ebro Delta, while the impact in the other three cases will be smaller and of comparable magnitude. Finally, the overall future impact of these hazards (associated to climatic change) in the four sites is discussed in comparative terms, deriving some conclusions.     

Henry’s law constant measurements for formaldehyde and benzaldehyde as a function of temperature and water composition

Henry’s law constants H of formaldehyde and benzaldehyde were determined using a dynamic system based on the water/air equilibrium at the interface within the length of a microporous tube. The measurements were conducted over the range 273–293 K in (i) deionized water, (ii) 35 g L^?1 solution of NaCl simulating seawater and (iii) two nitric acid solutions, i.e. 0.63 and 6.3 wt%.In pure water, the obtained data were used to derive the following Arrhenius expressions: ln H = (6423 ± 542)/T ? (13.4 ± 2.0) and ln H = (6258 ± 280)/T ? (17.5 ± 1.0) for formaldehyde and benzaldehyde, respectively. The H values, calculated at 293 K from Arrhenius expressions cited above were the following (in units of M atm^?1): H = 5020 ± 1170 (formaldehyde), H = 47 ± 5 (benzaldehyde). The temperature dependence of H permits then to derive the solvation enthalpies for both compounds: ΔH_solv = ?(53.4 ± 4.5) kJ mol^?1 and ΔH_solv = ?(52.0 ± 2.3) kJ mol^?1 for formaldehyde and benzaldehyde, respectively.In 35 g L^?1 salt solution, the H values were 27–66% and 12–21% lower than their respective determinations in deionized water, for formaldehyde and benzaldehyde respectively. The observed salt effect was used to estimate the following Setschenow coefficients at 293 K for 0.6 M NaCl: formaldehyde (0.21) and benzaldehyde (0.09).In 6.3 wt% nitric acid solution, H values of benzaldehyde were approximately 30% higher than those found in pure water although no significant influence was observed for formaldehyde.Finally, our experimental data were then used to estimate the fractions of formaldehyde and benzaldehyde in atmospheric aqueous phase and their derived atmospheric lifetimes.     

Prediction of the PCDD/F and dl-PCB 2005-WHO-TEQ content based on the contribution of six congeners: Toward a new screening approach for fish samples?

Current European Union regulation regarding polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in food and feed is based on Toxic Equivalent Quotient (TEQ) concept. For confirmatory purpose, the isotope-dilution method associated to a measurement by gas chromatography coupled with high resolution mass spectrometry is usually the method of choice for precisely measuring the 29 target congeners in three separated fractions. Time and cost related to these analyses are very significant. Various kinds of screening concepts can be considered. In the present study, we elaborated and validated a prediction model for the 2005 World Health Organization TEQ in fish, based on the measurement of 4 PCDD/F and 2 non-ortho dl-PCB congeners, potentially analyzable in a single extracted fraction by gas chromatography coupled with mass spectrometry. Large independent datasets have been used for model elaboration (n = 108) and validation (n = 363, n = 357 and n = 6).     

Endosulfan sulfate sorption on natural organic substances

This work proposes a viable remediation method based on the use of natural organic substances (NOSs) that characterize the Mediterranean region to improve the ecological system. A series of experiments, including variable conditions, such as temperature, pH, contact time, and pesticide concentration, were performed to demonstrate the efficiency of endosulfan sulfate removal from water by NOSs. Experimental results showed that the pH and temperature of pesticide solutions negatively affect the adsorption process. The maximum adsorption capacity for a specific initial concentration of endosulfan sulfate (0.5 microg/L) was achieved with Origanum compactum (75%), followed by Cistus ladaniferus and Raphanus raphanistrum (72 and 68%, respectively). The adsorption tests gave very satisfying results and point to the possible application of these supports as a remediation technique to prevent pesticide contamination of aquatic ecosystems.     

Biogenic sulphide plays a major role on the riboflavin-mediated decolourisation of azo dyes under sulphate-reducing conditions

The effect of high concentrations of sulphate on the reductive decolourisation of different azo dyes by anaerobic sludge was studied in batch cultures. Sludge cultures were pre-incubated under sulphate-reducing conditions prior addition of dyes. Little or no effects of sulphate (5-10 g sulphate l(-1)) on the rate of decolourisation of Reactive Orange 14 (RO14), Direct Blue 53 (DB53) and Direct Blue 71 (DB71) were observed when no external redox mediator was provided. However, an increase in sulphate concentration, in the presence of riboflavin (20 microM), enhanced the decolourisation of all dyes. The first-rate constant of decolourisation (k) was increased up to 2-, 3.6- and 2-fold for RO14, DB53 and DB71, respectively, by supplying high sulphate concentrations, compared to the controls lacking sulphate, in the presence of the redox mediator. Sulphate reduction did not take place during the course of azo reductions, but was only evident before dye addition and after complete decolourisation, suggesting azo dyes reduction out-competed sulphate reduction for the available reducing equivalents. The experimental data suggest that reduction of azo dyes by riboflavin, which had been reduced by biogenic sulphide, was the major mechanism implicated during decolourisations, which was corroborated by abiotic incubations. Riboflavin greatly accelerated the abiotic reduction of RO14, so that the k value was increased up to 44-fold compared to the control lacking riboflavin.     

Sucrose amendment enhances phytoaccumulation of the herbicide atrazine in Arabidopsis thaliana

Growth in the presence of sucrose was shown to confer to Arabidopsis thaliana (thale cress or mustard weed) seedlings, under conditions of in vitro culture, a high level of tolerance to the herbicide atrazine and to other photosynthesis inhibitors. This tolerance was associated with root-to-shoot transfer and accumulation of atrazine in shoots, which resulted in significant decrease of herbicide levels in the growth medium. In soil microcosms, application of exogenous sucrose was found to confer tolerance and capacity to accumulate atrazine in Arabidopsis thaliana plants grown on atrazine-contaminated soil, and resulted in enhanced decontamination of the soil. Application of sucrose to plants grown on herbicide-polluted soil, which increases plant tolerance and xenobiotic absorption, thus appears to be potentially useful for phytoremediation.     

Enhanced photocatalytic activities of silicon nanowires/graphene oxide nanocomposite: Effect of etching parameters

Homogeneous and vertically aligned silicon nanowires (SiNWs) were successfully fabricated using silver assisted chemical etching technique. The prepared samples were characterized using scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Photocatalytic degradation properties of graphene oxide (GO) modified SiNWs have been investigated. We found that the SiNWs morphology depends on etching time and etchant composition. The SiNWs length could be tuned from 1 to 42 µm, respectively when varying the etching time from 5 to 30 min. The etchant concentration was found to accelerate the etching process; doubling the concentrations increases the length of the SiNWs by a factor of two for fixed etching time. Changes in bundle morphology were also studied as function of etching parameters. The SiNWs diameter was found to be independent of etching time or etchant composition while the size of the SiNWs bundle increases with increasing etching time and etchant concentration. The addition of GO was found to improve significantly the photocatalytic activity of SiNWs. A strong correlation between etching parameters and photocatalysis efficiency has been observed, mainly for SiNWs prepared at optimum etching time and etchant concentrations of 10 min and 4:1:8. A degradation of 92% was obtained which further improved to 96% by addition of hydrogen peroxide. Only degradation efficiency of 16% and 31% has been observed for bare Si and GO/bare Si samples respectively. The obtained results demonstrate that the developed SiNWs/GO composite exhibits excellent photocatalytic performance and could be used as potential platform for the degradation of organic pollutants.