Reduction of atmospheric emissions due to switching from fuel oil to natural gas at a power plant in a critical area in Central Mexico

ABSTRACT

A case study was conducted to evaluate the SO₂ emission reduction in a power plant in Central Mexico, as a result of the shifting of fuel oil to natural gas. Emissions of criteria pollutants, greenhouse gases, organic and inorganic toxics were estimated based on a 2010 report of hourly fuel oil consumption at the “Francisco Pérez Ríos” power plant in Tula, Mexico. For SO₂, the dispersion of these emissions was assessed with the CALPUFF dispersion model. Emissions reductions of > 99% for SO₂, PM and Pb, as well as reductions >50% for organic and inorganic toxics were observed when simulating the use of natural gas. Maximum annual (993 µg/m³) and monthly average SO₂ concentrations were simulated during the cold-dry period (152–1063 µg/m³), and warm-dry period (239–432 µg/m³). Dispersion model results and those from Mexico City’s air quality forecasting system showed that SO₂ emissions from the power plant affect the north of Mexico City in the cold-dry period. The evaluation of model estimates with 24 hr SO₂ measured concentrations at Tepeji del Rio suggests that the combination of observations and dispersion models are useful in assessing the reduction of SO₂ emissions due to shifting in fuels. Being SO₂ a major precursor of acid rain, high transported sulfate concentrations are of concern and low pH values have been reported in the south of Mexico City, indicating that secondary SO₂ products emitted in the power plant can be transported to Mexico City under specific atmospheric conditions.

Implications: Although the surroundings of a power plant located north of Mexico City receives most of the direct SO₂ impact from fuel oil emissions, the plume is dispersed and advected to the Mexico City metropolitan area, where its secondary products may cause acid rain. The use of cleaner fuels may assure significant SO₂ reductions in the plant emissions and consequent acid rain presence in nearby populated cities and should be compulsory in critical areas to comply with annual emission limits and health standards.     

Zinc,lead, and cadmium tolerance and accumulation in Cistus libanotis,Cistus albidus,and Cistus salviifolius: Perspectives on phytoremediation

Heavy metal contamination is of particular concern for human health and the environment. Phytoremediation is an emerging cost‐effective strategy to remediate heavy metal contaminated soil. However, this technique is limited by the small number of plants that are tolerant to heavy metals and are also accumulators. This study assayed zinc, lead, and cadmium tolerance and accumulation in Cistus libanotis, Cistus albidus, and Cistus salviifolius. The plants were cultivated in hydroponic conditions and exposed to different concentrations of Pb(NO₃)₂ (100 and 200 µM), ZnSO₄ (100 and 200 µM), or CdCl₂ (10 and 20 µM) for 3 weeks. Plant biomass and metal accumulation in roots and aboveground parts varied greatly among the species. All three species appeared to be sensitive to Zn. However, C. albidus displayed strong tolerance to Pb and accumulated large quantities of Pb and Cd in its roots. C. libanotis accumulated large quantities of Pb and Cd in its aboveground parts. C. libanotis can thus be classified as a Pb and Cd accumulator species. The study results show that C. albidus is suitable for phytostabilization of Pb‐contaminated soils, while C. libanotis can be used for phytoextraction of both Pb and Cd.     

Effects of soil amendment with PCB-contaminated sediment on the growth of two cucurbit species

Environmental Science and Pollution Research - The aim of the study was to evaluate the influence of the application of increasing proportions (0%, 10%, 25%, 50%, 75%, and 100%) of an admixture of...     

Heavy Metals Monitoring using Bivalves from Mediterranean Sea and Red Sea

The concentrations of heavy metals (Cd, Co, Cu, Fe, Mn, Ni, Pd and Zn) were measured in the Bivalves (Modiolus auriculatus and Donax trunculus) collected from the Egyptian coasts of Mediterranean Sea and Brachiodonates sp. from the Egyptian coasts of Red Sea. The average concentrations of the heavy metals analyzed exhibited the following decreasing order: Fe > Zn > Cu > Mn > Ni > Co > Pb > Cd for both Mediterranean Sea and Red Sea. The analyses of Cd, Co, Ni, Pb, and Zn showed higher average concentrations for samples collected from Red Sea than that collected from Mediterranean Sea, while Fe, Cu and Mn showed the reverse results. Fe was used as a normalizing agent for all studied metals and exhibited presence of two locations from each of Mediterranean Sea and Red Sea have anthropogenic inputs of heavy metals. These results suggest that the coastal area in both Mediterranean Sea and Red Sea of Egypt might be considered relatively unpolluted with heavy metal.     

Fuzzy goal programming for biodiesel production

ABSTRACT

The energy consumed around the world and especially in Morocco is dominated by oil products. The latter; whether in the global or the national context; are mainly due to diesel, whose climate impacts are well established, suggesting the search for a greener alternative. Despite its virtues, biodiesel is struggling to impose itself for purely economic reasons. Thus, in order to offer a sustainable solution, while keeping in mind the unpredictable fluctuations (price, demand …). This work proposes a generalization of fuzzy goal programming into fully fuzzy goal programming and a relative application, where the aim is to have a final product at a competitive price.     

Reinforcement of thermoplastic rejects in the production of manhole covers

Thermoplastic rejects are un-recyclable plastics that are either incinerated causing harmful emissions into the air or land-filled. A common problem associated with manhole covers is the theft of the cover made out of cast iron and then selling it on the black market leaving a large empty hole in the road causing many potential safety and health hazards. This paper investigates the reinforcement of un-recyclable thermoplastic rejects to be used in the application of a manhole cover. Foundry sand and steel were used with the thermoplastic rejects as reinforcement of the material. Foundry sand is a hazardous waste that may cause many potential health hazards. It was shown that with 10% foundry sand, 90% thermoplastic rejects, and a steel mesh of diameter size 12 mm reinforcement, the manhole cover could withstand an average load of 112 kN. This value exceeds Grades A, AA, AAA, and B of acclaimed standards BS EN 124 for manhole covers, which ultimately indicates that the manhole cover may be used in pedestrian precincts and areas with occasional vehicular access. This composite material is produced out of waste materials (foundry sand and un-recyclable thermoplastic rejects) thus not utilizing or depleting the earth's natural resources, and eliminating the safety hazards, health hazards, and pollution associated with these waste materials. Not only is this product a benefit to the environment, but also inexpensive due to the fact that the materials are un-recyclable waste materials, and thus do not attain any value or cost.     

Potential toxicity of leachate from the municipal landfill in view of the possibility of their migration to the environment through infiltration into groundwater

Environmental Geochemistry and Health - Leachate from landfills is a product of complex biological and physicochemical processes occurring during waste storage. In the present study, the toxicity...