Prediction of the PCDD/F and dl-PCB 2005-WHO-TEQ content based on the contribution of six congeners: Toward a new screening approach for fish samples?

Current European Union regulation regarding polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in food and feed is based on Toxic Equivalent Quotient (TEQ) concept. For confirmatory purpose, the isotope-dilution method associated to a measurement by gas chromatography coupled with high resolution mass spectrometry is usually the method of choice for precisely measuring the 29 target congeners in three separated fractions. Time and cost related to these analyses are very significant. Various kinds of screening concepts can be considered. In the present study, we elaborated and validated a prediction model for the 2005 World Health Organization TEQ in fish, based on the measurement of 4 PCDD/F and 2 non-ortho dl-PCB congeners, potentially analyzable in a single extracted fraction by gas chromatography coupled with mass spectrometry. Large independent datasets have been used for model elaboration (n = 108) and validation (n = 363, n = 357 and n = 6).     

Endosulfan sulfate sorption on natural organic substances

This work proposes a viable remediation method based on the use of natural organic substances (NOSs) that characterize the Mediterranean region to improve the ecological system. A series of experiments, including variable conditions, such as temperature, pH, contact time, and pesticide concentration, were performed to demonstrate the efficiency of endosulfan sulfate removal from water by NOSs. Experimental results showed that the pH and temperature of pesticide solutions negatively affect the adsorption process. The maximum adsorption capacity for a specific initial concentration of endosulfan sulfate (0.5 microg/L) was achieved with Origanum compactum (75%), followed by Cistus ladaniferus and Raphanus raphanistrum (72 and 68%, respectively). The adsorption tests gave very satisfying results and point to the possible application of these supports as a remediation technique to prevent pesticide contamination of aquatic ecosystems.     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).     

Biogenic sulphide plays a major role on the riboflavin-mediated decolourisation of azo dyes under sulphate-reducing conditions

The effect of high concentrations of sulphate on the reductive decolourisation of different azo dyes by anaerobic sludge was studied in batch cultures. Sludge cultures were pre-incubated under sulphate-reducing conditions prior addition of dyes. Little or no effects of sulphate (5-10 g sulphate l(-1)) on the rate of decolourisation of Reactive Orange 14 (RO14), Direct Blue 53 (DB53) and Direct Blue 71 (DB71) were observed when no external redox mediator was provided. However, an increase in sulphate concentration, in the presence of riboflavin (20 microM), enhanced the decolourisation of all dyes. The first-rate constant of decolourisation (k) was increased up to 2-, 3.6- and 2-fold for RO14, DB53 and DB71, respectively, by supplying high sulphate concentrations, compared to the controls lacking sulphate, in the presence of the redox mediator. Sulphate reduction did not take place during the course of azo reductions, but was only evident before dye addition and after complete decolourisation, suggesting azo dyes reduction out-competed sulphate reduction for the available reducing equivalents. The experimental data suggest that reduction of azo dyes by riboflavin, which had been reduced by biogenic sulphide, was the major mechanism implicated during decolourisations, which was corroborated by abiotic incubations. Riboflavin greatly accelerated the abiotic reduction of RO14, so that the k value was increased up to 44-fold compared to the control lacking riboflavin.     

Sucrose amendment enhances phytoaccumulation of the herbicide atrazine in Arabidopsis thaliana

Growth in the presence of sucrose was shown to confer to Arabidopsis thaliana (thale cress or mustard weed) seedlings, under conditions of in vitro culture, a high level of tolerance to the herbicide atrazine and to other photosynthesis inhibitors. This tolerance was associated with root-to-shoot transfer and accumulation of atrazine in shoots, which resulted in significant decrease of herbicide levels in the growth medium. In soil microcosms, application of exogenous sucrose was found to confer tolerance and capacity to accumulate atrazine in Arabidopsis thaliana plants grown on atrazine-contaminated soil, and resulted in enhanced decontamination of the soil. Application of sucrose to plants grown on herbicide-polluted soil, which increases plant tolerance and xenobiotic absorption, thus appears to be potentially useful for phytoremediation.     

Enhanced photocatalytic activities of silicon nanowires/graphene oxide nanocomposite: Effect of etching parameters

Homogeneous and vertically aligned silicon nanowires (SiNWs) were successfully fabricated using silver assisted chemical etching technique. The prepared samples were characterized using scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Photocatalytic degradation properties of graphene oxide (GO) modified SiNWs have been investigated. We found that the SiNWs morphology depends on etching time and etchant composition. The SiNWs length could be tuned from 1 to 42 µm, respectively when varying the etching time from 5 to 30 min. The etchant concentration was found to accelerate the etching process; doubling the concentrations increases the length of the SiNWs by a factor of two for fixed etching time. Changes in bundle morphology were also studied as function of etching parameters. The SiNWs diameter was found to be independent of etching time or etchant composition while the size of the SiNWs bundle increases with increasing etching time and etchant concentration. The addition of GO was found to improve significantly the photocatalytic activity of SiNWs. A strong correlation between etching parameters and photocatalysis efficiency has been observed, mainly for SiNWs prepared at optimum etching time and etchant concentrations of 10 min and 4:1:8. A degradation of 92% was obtained which further improved to 96% by addition of hydrogen peroxide. Only degradation efficiency of 16% and 31% has been observed for bare Si and GO/bare Si samples respectively. The obtained results demonstrate that the developed SiNWs/GO composite exhibits excellent photocatalytic performance and could be used as potential platform for the degradation of organic pollutants.     

Search and rescue in collapsed structures: engineering and social science aspects

This paper discusses the social science and engineering dimensions of search and rescue (SAR) in collapsed buildings. First, existing information is presented on factors that influence the behaviour of trapped victims, particularly human, physical, socioeconomic and circumstantial factors. Trapped victims are most often discussed in the context of structural collapse and injuries sustained. Most studies in this area focus on earthquakes as the type of disaster that produces the most extensive structural damage. Second, information is set out on the engineering aspects of urban search and rescue (USAR) in the United States, including the role of structural engineers in USAR operations, training and certification of structural specialists, and safety and general procedures. The use of computational simulation to link the engineering and social science aspects of USAR is discussed. This could supplement training of local SAR groups and USAR teams, allowing them to understand better the collapse process and how voids form in a rubble pile. A preliminary simulation tool developed for this purpose is described.     

Freight transport and non-driving work duties as predictors of falling asleep at the wheel in urban areas of Crete

BACKGROUND: This study investigated the impact of subjective reports of drowsy driving and non-driving duties on the falling asleep responses and road crash involvement of professional drivers in Crete. An attempt was also made to elucidate other driving parameters, such as freight transportation, which could be potential predictors of risky driving, after controlling for lifestyle patterns. METHOD: A sample of 317 professional drivers was studied through personal interviews. The interview questionnaire included items about sleep and fatigue as contributing factors to falling asleep probability and crash risk. In addition, the drivers reported the type of freight they carried in their last trip, as well as practices such as smoking and alcohol consumption. RESULTS: The first logistic regression analysis showed that the most significant predictors of falling asleep at the wheel were transportation of fruits/vegetables and livestock, non-driving hours of work, insufficient hours of sleep, and smoking. The second logistic regression analysis revealed all the previous items as powerful factors of crash probability, including the transportation of express freight and freezer. IMPACT: The findings of the current study are discussed as they pertain to directions for future studies and for the development of fatigue countermeasures.     

Use of cement dust in the manufacture of vitrified sewer pipes

Waste by-pass cement dust was added in different percentages ranging from 2% to 10% to a standard mix for sewer pipes manufacture, as a substitute for expensive feldspar. It was found that a mix consisting of 45% kaolin, 36% ball clay, 9% grog and 10% by-pass dust and fired at a temperature of 1300 degrees C for 4 h yielded samples that meet the standards. It was possible to reach a water absorption of 4%, a modulus of rupture of 7.8 MPa and a resistance to acids and alkalis conforming with standard values. A test pipe was fabricated by vacuum extrusion using the suggested composition and was found to withstand a hydraulic pressure of 14 MPa for one minute without the appearance of any cracks.     

Element mobility during metasomatism of granitic rocks in the Saint-Chély d'Apcher area (Lozère,France)

This paper summarises the behaviour of major and trace elements during hydrothermal alteration processes in the Vareilles albite deposit, Saint-Chély d' Apcher area (Lozère, France). Sampling focused mainly on fine- to medium-grained two-mica granite facies surrounding albitite veins in two open pits. The primary chemical variability inherent in sampling parent rock and analytical uncertainties can seriously affect element mobility calculations. Here we present a simple model that allows to discriminate between magmatic and alteration effects and to make a proper evaluation of the chemical changes that have caused the alteration. For this reason, a range of unaltered granites and albitites were sampled to evaluate the degree of parent rock heterogeneity. Duplicate measurements were performed by epithermal neutron activation analysis (ENAA) to obtain a reliable mean concentration for trace elements and to evaluate results reproducibility. ENAA measurements are completed by analysis of major elements by inductively coupled plasma-mass spectrometry (ICP-MS). The enrichment or depletion of an element during alteration, relative to its concentration in fresh parent rock, can be calculated on the basis of the assumed immobility of some elements during the process. In this study, we have assumed Ta as immobile element on the basis for his inert behaviour. The distinct differences in chemical change between altered and unaltered granite suggest the need to consider alteration event as an important parameter in evaluating granitic rocks for nuclear waste disposal.