Optimum Methods of Inactivation of Strongyloides stercoralis Larvae from Reclaimed Wastewater

Strongyloidiasis presents a major health hazard when reusing wastewater. Albendazol with a concentration of 4 mg/l, a contact time of 45 min, pH 1.2 and pH 10.2, killed the larva. The larva was also killed with a 0.03% concentration of iodine and a detention time of 30 min or a 0.04% concentration of iodine and a contact time of 10 min. The required detention time to inactivate larva in water was found to be 17 days. The minimum revealed residual chlorine to kill the larvae was 4 mg/l with 120 min of detention time, and a minimum contact time was found to be 80 min with a residual of 23 mg/l. Many methods are available to inactivate the Strongyloides stercoralis, which could be acids, alkaline chemicals, larvicidal chemicals, super chlorination, or just detention time. The best method must be determined according to the prevailing specific environmental site and the feasibility of the selected method(s).     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Determination of oral uptake and biodistribution of platinum and chromium by the garden snail (Helix aspersa) employing nano-secondary ion mass-spectrometry

Environmental heavy metal contamination is a case of concern for both animal and human health. Studying the fate of metals in plant or animal tissues may provide information on pollution. In the present study, we investigated the possibility to follow the biological fate of chromium and platinum uptake in common garden snails (Helix aspersa), typically accumulating high concentrations of metals from their environment. Chromium and platinum were administered orally to snails in 5 groups (n = 25/group): control, food contaminated by ca. 2.5 μg g^?1 and 19 μg g^?1 chromium and 2.5 μg g^?1 and 25 μg g^?1 platinum, for 8 weeks. Following exposure, surviving snails were sacrificed, shell and remaining tissue investigated by ICP-MS, and shell, midgut gland and mantle by nano-secondary ion mass-spectrometry (Nano-SIMS). ¹²C¹⁴N-normalized platinum and ⁴⁰Ca-normalized chromium measurements indicated highest enrichments in cellular vesicles of the midgut gland, and lower concentrations in mantle and shell, with significantly higher platinum and chromium concentrations in the 2 exposure groups vs. control (P < 0.05), with somewhat differing distribution patterns for chromium and platinum. Comparable results were obtained by ICP-MS, with both chromium and platinum fed snails showing drastically elevated concentrations of metals in shell (up to 78 and 122 μg g^?1 dw platinum and chromium, respectively) and in other tissues (up to 200 and 1125 μg g^?1 dw platinum and chromium, respectively). Nano-SIMS allowed for semi-quantitative comparison of metal fate in snail tissues, making this an interesting technique for future studies in the area of environmental pollution.     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.     

Simulation study of the Lower Cretaceous geothermal reservoir for aquifer thermal energy storage

Environmental Geochemistry and Health - The aquifer thermal energy storage (ATES) has gained attention in several countries as an installation for increasing the energy efficiency of geothermal...     

Peri-urban agro-ecosystems in the Mediterranean: diversity,dynamics, and drivers

Regional Environmental Change - To address sustainability challenges of agro-ecosystems located in Mediterranean urban regions, this paper focuses on the multidisciplinary subject of urban...     

Anti-oxidant and hepatoprotective effects of Salvia officinalis essential oil against vanadium-induced oxidative stress and histological changes in the rat liver

Environmental Science and Pollution Research - The present study was designed to evaluate the protective effects of Salvia officinalis essential oil (SOEO) against vanadium-induced hepatotoxicity...     

Spontaneous abortion in women occupationally exposed to inhalational anesthetics: a critical systematic review

Environmental Science and Pollution Research - Occupational exposure to inhalational anesthetics has been associated with health problems, including reproductive issues. Considering the scarcity...     

Application of ultrasound irradiation in landfill leachate treatment

Environmental Science and Pollution Research - Landfilling is known to be the most widely used method in municipal solid waste management in many countries. Landfill leachate containing different...     

Tillage and crop residue effects on soil carbon and carbon dioxide emission in corn-soybean rotations

Soil C change and CO2 emission due to different tillage systems need to be evaluated to encourage the adoption of conservation practices to sustain soil productivity and protect the environment. We hypothesize that soil C storage and CO2 emission respond to conservation tillage differently from conventional tillage because of their differential effects on soil properties. This study was conducted from 1998 through 2001 to evaluate tillage effects on soil C storage and CO2 emission in Clarion-Nicollet-Webster soil association in a corn [Zea mays L.]-soybean [Glycine max (L.) Merr.] rotation in Iowa. Treatments included no-tillage with and without residue, strip-tillage, deep rip, chisel plow, and moldboard plow. No-tillage with residue and strip-tillage significantly increased total soil organic C (TC) and mineral fraction C (MFC) at the 0- to 5- and 5- to 10-cm soil depths compared with chisel plow after 3 yr of tillage practices. Soil CO2 emission was lower for less intensive tillage treatments compared with moldboard plow, with the greatest differences occurring immediately after tillage operations. Cumulative soil CO2 emission was 19 to 41% lower for less intensive tillage treatments than moldboard plow, and it was 24% less for no-tillage with residue than without residue during the 480-h measurement period. Estimated soil mineralizable C pool was reduced by 22 to 66% with less intensive tillage treatments compared with moldboard plow. Adopting less intensive tillage systems such as no-tillage, strip-tillage, deep rip, and chisel plow and better crop residue cover are effective in reducing CO2 emission and thus improving soil C sequestration in a corn-soybean rotation.