The false alarm/surprise trade-off in weather warnings systems: an expected utility theory perspective

Environment Systems and Decisions - Early warning systems for weather events are becoming widespread as technological capacities develop. For warnings to be effective, they must allow enough lead...     

Polyaniline films for efficient removal of aromatic acids from water

Adsorbents in the form of powders are commonly used to filtrate organic compounds in waters. However, this technique requires the separation of the solid phase from the solution after adsorption experiments. Here we propose the use of films as adsorbents. We synthesized polyaniline films by chemical oxidative polymerization of aniline on red ceramic brick. This film was tested to remove trimellitic, hemimellitic and pyromellitic acids as model molecules of the biodegradation of aquatic humic substances. We evaluated the effect of pH, contact time and initial concentration. Our results show that optimal adsorption conditions required 45 min of solid/liquid contact at pH 7 and an initial concentration of 20 mg/l. The maximum adsorption capacities for hemimellitic, trimellitic and pyromellitic acids are 154.83 for hemimellitic acid, 161.88 for trimellitic acid and 175.26 mg/g for pyromellitic acid. The adsorption efficiency of the polyaniline film decreased only by 13 % after four cycles. Overall, we conclude that polyaniline films are promising separable adsorbents compared to conventional adsorbents for removal of aromatic polycarboxylic acids from water.     

Maximising the net social benefit of the construction of post‐disaster alternative housing projects

The widespread destruction that follows large‐scale natural disasters, such as Hurricane Katrina in August 2005, challenges the efficacy of traditional temporary housing methods in providing adequate solutions to housing needs. Recognising these housing challenges, the Congress of the United States allocated, in 2006, USD 400 million to the Department of Homeland Security to support Alternative Housing Pilot Programs, which are intended to explore the possibilities of providing permanent and affordable housing to displaced families instead of traditional temporary housing. This paper presents a new methodology and optimisation model to identify the optimal configurations of post‐shelter housing arrangements to maximise the overall net socioeconomic benefit. The model is capable of quantifying and optimising the impacts of substituting temporary housing with alternative housing on the social and economic welfare of displaced families as well as the required additional costs of doing so. An application example is presented to illustrate the use of the model and its capabilities.     

Field dissipation and health hazard assessment of Fenhexamid on Egyptian grapes

Dissipation behavior and hazard assessment of the fungicide fenhexamid applied to grapes were investigated under climatic conditions in Egypt. Fenhexamid residues were extracted from grape samples with ethyl acetate. The extract was cleaned up by QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, and determined by gas chromatographic method (GC-μECD). The average recoveries ranged between 94.2% and 99.4% with associated relative standard deviation not exceeding 12%. The estimated limit of quantification for fenhexamid was 0.1 mg/kg. The field results showed that fenhexamid dissipated rapidly from grapes and had a half-life of approximately 4.21 days. Hazard assessment was evaluated by using the hazard quotient (HQ). Data showed that the HQ value was significantly less than HQ = 1. Results indicate that hazard of fenhexamid use in grape even at 1.5-fold higher than recommended dosage was negligible to humans. This study could provide guidance for safe and reasonable use of fenhexamid in grapes and prevent health problems to consumers. However, further hazard assessment studies are needed to ascertain the hazard of fenhexamid residues on grape to vulnerable groups, including children, pregnant women, and elderly consumers.     

Mitigation of glyphosate-based herbicide toxicity in maize (Zea mays L.) seedlings by ascorbic acid

Abstract

The toxicity of glyphosate at 3.6?mg L^?1 to maize seedlings raised from un-treated seeds and the effectiveness of seed pretreatment by soaking in 0.25?mmol L^?1 ascorbic acid (AsA) solution for mitigation of toxicity were evaluated in hydroponic culture. Glyphosate dramatically reduced the growth of roots and photosynthetic pigments in the leaves but increased protein content in the leaves. Superoxide dismutase activity and AsA concentration in the roots were increased, and guaiacol peroxidase (GPOX) activity was unaffected. Pretreatment with AsA improved the dry mass of the roots and shoots, increased the protein content in roots and leaves, and significantly decreased the activity of GPOX in roots. The positive effect of AsA treatment was not associated with more efficient functioning of the antioxidative system.     

Environmental risk assessment of cobalt and manganese from industrial sources in an estuarine system

A total of 74 samples of soil, sediment, industrial sludge, and surface water were collected in a Mediterranean estuarine system in order to assess the potential ecological impact of elevated concentrations of Co and Mn associated with a Terephthalic (PTA) and Isophthalic (PIPA) acids production plant. Samples were analyzed for elemental composition (37 elements), pH, redox potential, organic carbon, and CaCO₃ content, and a group of 16 selected samples were additionally subjected to a Tessier sequential extraction. Co and Mn soil concentrations were significantly higher inside the industrial facility and around its perimeter than in background samples, and maximum dissolved Co and Mn concentrations were found in a creek near the plant’s discharge point, reaching values 17,700 and 156 times higher than their respective background concentrations. The ecological risk was evaluated as a function of Co and Mn fractionation and bioavailability which were controlled by the environmental conditions generated by the advance of seawater into the estuarine system during high tide. Co appeared to precipitate near the river mouth due to the pH increase produced by the influence of seawater intrusion, reaching hazardous concentrations in sediments. In terms of their bioavailability and the corresponding risk assessment code, both Co and Mn present sediment concentrations that result in medium to high ecological risk whereas water concentrations of both elements reach values that more than double their corresponding Secondary Acute Values.     

Feasibility of incorporating treated lignins in fiberboards made from agricultural waste

This paper studies the feasibility of incorporating treated lignins in fiberboards made from Vitis vinifera as an agricultural waste. The treated lignins are the purified Kraft lignin and the alkaline hydrolyzed Kraft lignin. V. vinifera raw material and its fibers were characterized in terms of chemical composition and the results were compared to other biomass species. The chemical composition of treated lignins shows that they have high purity compared to the lignin raw material. The lignin-V. vinifera fibreboards were produced on laboratory scale by adding powdered treated lignins to the material that had previously been steam exploded. Some of the important properties of fibreboards prepared using the treated lignins as natural adhesives were evaluated. These properties were density, thickness swelling, water absorption, modulus of elasticity, modulus of rupture, internal bond strength. The explored levels of treated lignins vary from 5% to 20%. The results showed that binderless fibreboards, fibreboards made from V. vinifera fibers and alkaline hydrolyzed Kraft lignin have weaker mechanical properties. However, the fibreboards obtained using purified Kraft lignin have good mechanical and water resistance properties which satisfy the requirements of the relevant standards specifications.     

Evolution of iron speciation during hydration of C4AF

It is now well accepted and demonstrated that calcium silicate, calcium aluminate and calcium sulfo aluminate (ettringite, AFm) phases exhibit a good capability to fix metals and metalloids. Unfortunately the role of minor phases and especially calcium-ferric aluminate phase, shorthand C4AF is not well defined. In other systems like in soils or sediments iron phases play a key role in the fixation of pollutant. In cement sorption isotherms, indicated that various metals can be retained by the C4AF hydrated products. Therefore the capabilities of those phase to retain heavy metal should not be neglected. Previous investigations have shown that the minerals formed during the hydration of C4AF are similar to those formed from C3A (pure tri-calcium aluminate) under comparable conditions. Nevertheless no investigation was conducted at the molecular level and there is still a controversy whether Fe substitutes for Al in the hydrated minerals in whole or in part, or if it forms FeOOH clusters scattered throughout the matrix. In this context we have conducted XAS experiments using synchrotron radiation. It was found that the hydration of C4AF forms C3AH6 (hydrogarnet) in which Fe randomly substitutes for Al as well as an amorphous FeOOH phase. Intermediate products like AFm (i.e., an ill organized lamellar phase) are also formed but rapidly evolve to C3AH6; iron does not seem to be incorporated in the AFm structure.     

Enhanced photocatalytic activities of silicon nanowires/graphene oxide nanocomposite: Effect of etching parameters

Homogeneous and vertically aligned silicon nanowires (SiNWs) were successfully fabricated using silver assisted chemical etching technique. The prepared samples were characterized using scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Photocatalytic degradation properties of graphene oxide (GO) modified SiNWs have been investigated. We found that the SiNWs morphology depends on etching time and etchant composition. The SiNWs length could be tuned from 1 to 42 µm, respectively when varying the etching time from 5 to 30 min. The etchant concentration was found to accelerate the etching process; doubling the concentrations increases the length of the SiNWs by a factor of two for fixed etching time. Changes in bundle morphology were also studied as function of etching parameters. The SiNWs diameter was found to be independent of etching time or etchant composition while the size of the SiNWs bundle increases with increasing etching time and etchant concentration. The addition of GO was found to improve significantly the photocatalytic activity of SiNWs. A strong correlation between etching parameters and photocatalysis efficiency has been observed, mainly for SiNWs prepared at optimum etching time and etchant concentrations of 10 min and 4:1:8. A degradation of 92% was obtained which further improved to 96% by addition of hydrogen peroxide. Only degradation efficiency of 16% and 31% has been observed for bare Si and GO/bare Si samples respectively. The obtained results demonstrate that the developed SiNWs/GO composite exhibits excellent photocatalytic performance and could be used as potential platform for the degradation of organic pollutants.     

Radiometric and environmental impacts of mill tailings at experimental plant processing unit,Allouga, Egypt

Abstract

Uranium mining and ore processing are known to be harmful to the environment and human health if the waste generated is not managed properly. The aim of the present study is to determine the radiological indices in the mill tailings and review the possible attempts to utilize and minimize its hazardous effect. The activity concentrations of natural radionuclides, ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K have been measured by gamma spectrometry using HP-Ge detector. The average activity concentrations of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K in the tailings wastes were 2071.8, 59.92, 6921.262, and 445. 57?Bq/kg respectively which are higher than the international average limit. The ranges of hazard indices such as Radium equivalent activity (Ra_eq), external hazard index (H_ex), internal hazard index (H_in), γ-radiation hazard index I_γ, Dose rate (nGy/h) and annual effective dose equivalent (AED), were estimated. Uraniumm isotopic ratios in the ore –material and mill tailing samples indicate migration out of radionuclides to the surrounding environment causing contamination and many dangerous diseases. Fairly, all investigated tailing waste samples do not satisfy the universal standards, the studied wastes relatively still have high uranium contents and need reprocessing.