Pb in medicinal plants from Jordan

This is the first report on Pb in medicinal herbs from Jordan. Medicinal herbs may present a health risk due to the presence of toxic metals. Seventy-nine dry medicinal plant samples were collected from herbalist shops in Jordan. The plants were digested with acids and analyzed for total Pb concentration using atomic absorption spectrometry. Mean Pb concentration was 15.9 μg/g on a dry weight basis. Our results show that Pb concentrations in Jordan medicinal plants are higher than published data in other countries. The highest level of 33.4 μg Pb/g was determined in Inula viscosa, and the lowest level of 3.0 μg Pb/g was found in Nigella sativa. Calculated daily intakes of Pb of most analyzed herbs were high; most of them are higher than recommended values by the world health organization (WHO). Fortunately, the herbs that contain the highest Pb levels are the less commonly used medicinal herbs in Jordan. The mean Pb levels in the most commonly, commonly and less commonly used herbs in Jordan are 13.9, 13.1 and 16.9 μg Pb/g, respectively. The average dietary intake of Pb through a mixture of these medicinal herbs consumption, assuming 5.0 g herbs is consumed daily, is 79.5 μg Pb/day, which is higher than the maximum daily limit allowed by WHO. We conclude that most of the medicinal plants consumed in Jordan contain significant amount of Pb, and therefore, people of Jordan should not consume large amounts of these herbs.     

Legislative aspects of pesticide regulations

Abstract

This paper reviews the development of pesticides as an agricultural and health tool and discusses the national and international implications of pesticide regulation. The need for scientific input to the legislative and regulative processes is explained. Appropriate legislation and regulatory structures are presented. Finally, the need for international cooperation in the use and control of pesticides is analyzed.     

Trace element content in tea brewed in traditional metallic and stainless steel teapots

The migration of metals in tea brewed in metallic teapots was investigated. The teapots were obtained from North Africa stores in Brussels in 2005–2006 and in 2011. Chinese gunpowder green tea, the most commonly used tea in the Moroccan community, was used to prepare the tea. Tea brewed in metallic teapots was compared to tea brewed in a glass vessel in order to evaluate the contribution of the tea and the teapots to the metal concentrations in the brewed tea. Tea samples were also collected in Moroccan households and in tearooms in Brussels. The elements As, Cd, Pb, Sn, Mn, Fe, Cr, Co, Ni, Cr, Cu, Zn, and Al were analyzed by high-resolution sector field inductively coupled mass spectrometry. The relationship between the metal composition of the alloy of the teapot and the metal concentration in tea was also investigated. Migration of Pb and to a lesser amount Ni, Cu, and Zn was observed in brass teapots and migration of Cd from a number of stainless steel teapots was observed. The soldering connecting the sprout to the teapot was shown to be an important source of Pb to the tea. High levels of Mn and Al were also observed in the brewed tea and these elements where shown to originate from the tea itself. Metal exposure from tea drinking was calculated for different tea consumption levels and different metal concentration levels and compared to toxicological reference values.     

Characterization of phosphogypsum wastes associated with phosphoric acid and fertilizers production

The present work is directed to characterize the phosphogypsum (PG) wastes associated with phosphoric acid produced by the wet process in industrial facility for the production of fertilizers and chemicals in Egypt. The PG waste samples were characterized in terms of spectroscopic analysis (X-ray diffraction, X-ray fluorescence, IR spectra) and radiometric analysis (γ- and α-measurements). The γ-ray measurements showed that the average activity concentrations are 140 ± 12.6, 459 ± 36.7, 323 ± 28.4, 8.3 ± 0.76 and 64.3 ± 4.1 Bq/kg for U-238, Ra-226, Pb-210, Th-232 and K-40, respectively. The α-particle measurements of uranium isotopes showed that the average activity concentrations of U-238, U-235 and U-234 were 153 ± 9.8, 7 ± 0.38, 152 ± 10.4 Bq/kg, respectively. The average radiochemical recovery (%) of the destructive α-particle measurements is ∼70% with a resolution (FWHM) of ∼30 keV. Activity ratios of U-238/Ra-226 and U-238/Pb-210 were less than unity (i.e., <1) and equal to 0.31 ± 0.02 and 0.47 ± 0.16, respectively. The isotopic ratios of U-238/U-235 and U-238/U-234 (in PG and PR samples) were close to the normal values of ∼21.7 and ∼1, respectively and are not affected by the wet processing of phosphate rock (PR). The obtained results of PG waste samples were compared with phosphate rock (PR) samples. The radiation hazard indices are namely, radium activity index (Ra-Eq > 370 Bq/kg), total absorbed gamma dose rate (D_γr > 5 nGy/h) and radon emanation fraction (Rn-EF > 20%). Uncertainty of the sample counting was 95% confidence level of σ. The results indicated the necessity to find suitable routes to decrease and/or redistribute the radionuclide of environmental interest (i.e., Ra-226) in PG wastes, consequently to reduce its radiation impacts in the surrounding environment.     

Effect of initial sulfide concentration on sulfide and phenol oxidation under denitrifying conditions

The objective of this work was to evaluate the effect of the initial sulfide concentration on the kinetics and metabolism of phenol and sulfide in batch bioassays using nitrate as electron acceptor. Complete oxidation of sulfide (20 mg L(-1) of S(2-)) and phenol (19.6 mg L(-1)) was linked to nitrate reduction when nitrate was supplemented at stoichiometric concentrations. At 32 mg L(-1) of sulfide, oxidation of sulfide and phenol by the organo-lithoautotrophic microbial culture was sequential; first sulfide was rapidly oxidized to elemental sulfur and afterwards to sulfate; phenol oxidation started once sulfate production reached a maximum. When the initial sulfide concentration was increased from 20 to 26 and finally to 32 mg L(-1), sulfide oxidation was inhibited. In contrast phenol consumption by the denitrifying culture was not affected. These results indicated that sulfide affected strongly the sulfide oxidation rate and nitrate reduction.     

Synthesis of Polyurethane and Characterization of its Composites Based on Alfa Cellulose Fibers

Polyurethane (PU) based on polycaprolactone (PCL) and 4,4′ diphenyl methylene diisocyanate (MDI) was synthesized using a two-step method. The PU obtained was then blended with various amounts of cellulose extracted from alfa stems to prepare composite materials. The influence of cellulose on the thermal and mechanical properties of different composites was demonstrated by means of several characterization techniques such as Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM)…     

Externalities of Fugitive Dust

It is known that fugitive dust can cause human health and environmental problems, alone or in combination with other air pollutants. These problems are referred to as ‘external costs’ that have been traditionally ignored. However, there is a growing interest towards quantifying externalities to assist policy and decision-making. With this in mind, the present study aimed at discussing the environmental regulations that deal with fugitive dust, the impact of fugitive dust on human health and global climate system, and the available methods for calculating fugitive dust externalities. The damage cost associated with human health and global environmental problems was predicted based on the environmental strategy priority model. The damage cost estimated by the model ranged from 40 to 374 EUR/kg of emitted fugitive dust with a mean value of 120 EUR/kg of emitted fugitive dust. It was also found that PM_2.5 and PM₁₀ have contributed to about 60% and 36% of the estimated damage cost, respectively. The remaining 4% was attributed to both nitrate and sulfate aerosols.     

Spatial variability of isoproturon mineralizing activity within an agricultural field: geostatistical analysis of simple physicochemical and microbiological soil parameters

We assessed the spatial variability of isoproturon mineralization in relation to that of physicochemical and biological parameters in fifty soil samples regularly collected along a sampling grid delimited across a 0.36 ha field plot (40 x 90 m). Only faint relationships were observed between isoproturon mineralization and the soil pH, microbial C biomass, and organic nitrogen. Considerable spatial variability was observed for six of the nine parameters tested (isoproturon mineralization rates, organic nitrogen, genetic structure of the microbial communities, soil pH, microbial biomass and equivalent humidity). The map of isoproturon mineralization rates distribution was similar to that of soil pH, microbial biomass, and organic nitrogen but different from those of structure of the microbial communities and equivalent humidity. Geostatistics revealed that the spatial heterogeneity in the rate of degradation of isoproturon corresponded to that of soil pH and microbial biomass.