Occupational Exposure to Natural UV Radiation and Premature Skin Ageing

The skin is the part of the human body most vulnerable to ultraviolet (UV) radiation. The spectrum of the negative effects of UV radiation on the skin ranges from acute erythema to carcinogenesis. Between these extreme conditions, there are other common skin lesions, e.g.,photoageing. The aim of this study was to assess the skin for signs of photoageing in a group of 52 men occupationally exposed to natural UV radiation. There were 2 types of examinations: an examination of skin condition (moisture, elasticity, sebum, porosity, smoothness, discolourations and wrinkles) with a device for diagnosing the skin, and a dermatological examination. The results of both examinations revealed a higher percentage of skin characteristics typical for photoageing in outdoor workers compared to the general population.     

Vulnerability assessment and adaptation to the impacts of sea level rise on the Kingdom of Bahrain

This paper assesses quantitatively the impact of sea level rise (SLR) at the global and regional scale as a result of climate change (CC) on the coastal areas of the Kingdom of Bahrain’s islands (36 Islands). The standard Intergovernmental Panel on Climate Change (IPCC) guidelines was modified as appropriate for the situation of the study area. Geographic Information Systems (GIS) coupled with Remote Sensing (RS) were used as the main techniques of collecting, analyzing, modeling simulating and disseminating information to build SLR scenarios in a geographically referenced context. Also, these tools were used to assess vulnerability and risk of the coastal area of the islands with the expectation that coastal planner and government authorities will profit from integrating these knowledge into a broad based environmental decision making. Three SLR scenarios: low, moderate and high were developed to examine the impacts from SLR on all islands. The low SLR scenario (Optimistic) assumes a 0.5-m rise above current sea level, the moderate scenario (Intermediate) assumes a one meter rise, and the high scenario (Pessimistic) assumes a 1.5 m rise in sea level. Two more SLR scenarios were assumed to perform risk analysis, a 2 and 5 meter rise above current sea level. The simulation of SLR are quite straightforward, emphasizing on the uses of both of the data that are incorporated from the satellite images and the created Digital Elevation Model (DEM) to estimate SLR scenarios that are adapted in the study. These data were used to predict consequences of the possibility of the rise in sea level at different scenarios which may alter the landuse and patterns of human communities. Results indicate that low-lying coastal areas of Bahrain islands are at risk from the effects of any SLR resulting from CC. These islands are vulnerable under different SLR Scenarios. More than 17% of the country total area may be inundated under 1.5 m SLR in 2100. The total area that might be lost under different sea level scenarios will vary from more than 77 km² if SLR reaches 0.5 m, to about 100 km² under 1.0 m SLR and may reach 124 km² under 1.5 m SLR scenario. The total inundated areas due to risk scenarios will reach 133 km², if the SLR rises to 2.0 m, and it is estimated to be more than (22%) of the main island total area. Under the second scenario, if the SLR reaches 5.0 m, the main islands will lose approximately half of its area (47%) equal to 280 km². Hawar islands group will lose about (30%) of its total area under 2.0 m SLR, which is about 15.5 km².A SLR adaptation policy framework (APF) and adaptation policy initiatives (APIs) are suggested for planners to build upon for reducing the likely effects of SLR in the Kingdom of Bahrain. The framework is composed of four steps namely, acquisition of information, planning and design, implementation and monitoring and evaluation. A general policy framework for a national response to SLR is suggested. Additionally, a range of policy adaptation options/initiatives to sustain coastal developments under the likely effects of SLR are recommended.     

Immune responses,DNA damage and ultrastructural alterations of gills in the marine mussel Lithophaga lithophaga exposed to CuO nanoparticles

Environmental Science and Pollution Research - Nanoparticle (NP) pollution is a worldwide problem. Copper oxide nanoparticles (CuO NPs) are one of the most used NPs in a variety of applications,...     

Restoring the plant productivity of heavy metal-contaminated soil using phosphate sludge, marble waste, and beneficial microorganisms

Assisted natural remediation (ANR) has been highlighted as a promising, less expensive, and environmentally friendly solution to remediate soil contaminated with heavy metals. We tested the effects of three amendments (10% compost, C; 5 or 15% phosphate sludge, PS5 and PS15; and 5 or 15% marble waste, MW5 and MW15) in combination with microorganism inoculation (rhizobacteria consortium alone, mycorrhizae alone, and the two in-combination) on alfalfa in contaminated soil. Plant concentrations of Zn, Cu, and Pb were measured, along with proline and malondialdehyde production. The microbiological and physicochemical properties of the mining soil were evaluated. Application of the amendments allowed germination and promoted growth. Inoculation with the rhizobacteria consortium and/or mycorrhizae stimulated plant growth. PS and MW stimulated the production of proline. Inoculation of alfalfa with the rhizobacteria-mycorrhizae mixture and the application of MW allowed the safe cultivation of the legume, as shown by the low concentrations of metals in plant shoots. Zn and Pb concentrations were below the limits recommended for animal grazing and accumulated essentially in roots. Soil analyses showed the positive effect of the amendments on the soil physicochemical properties. All treatments increased soil pH (around 7), total organic carbon, and assimilable phosphorus content. Notably, an important decrease in soluble heavy metals concentrations was observed. Overall, our findings revealed that the applied treatments reduced the risk of metal-polluted soils limiting plant growth. The ANR has great potential for success in the restoration of polymetallic and acidic mining soils using the interaction between alfalfa, microorganisms, and organo-mineral amendments.     

The effect of pH on zinc adsorption equilibria and exchangeable zinc pools in soils

Zinc adsorption equilibria were measured in soils differing in pH but with similar textures and total zinc concentrations, using adsorption isotherm and isotopic exchange techniques. The results suggested that the equilibrium between solution and exchangeable zinc was strongly pH dependent and the active zinc species in adsorption was single charged (e.g. Zn(OH)(+)). The size of the exchangeable zinc pool was not strongly pH dependent. Similar results were obtained when zinc was added to the soils, either as Zn(NO(3))(2) or in sewage sludge.     

Effects of sewage sludge amendments on pesticide sorption and leaching through undisturbed Mediterranean soils

The Gharb region in Morocco is an important agricultural zone where soils receive pesticide treatments and organic amendments to increase yields. The groundwater aquifer in the Gharb region is relatively shallow and thus vulnerable. The objective of this work was to study the influence of organic amendments on diuron, cyhalofop-butyl and procymidone leaching through undisturbed soil columns. Two soils were sampled from the Gharb region, a Dehs (sandy soil) and a R’mel (loamy clay soil). Following elution (124.5 mm), the amount of pesticide residues in the leachates of the sandy soil (0.06–0.21 %) was lower than in those of the loamy clay soil (0.20–0.36 %), which was probably due to preferential flow through the loamy clay soil. The amount of procymidone leached through the amended soil columns was greater than the control for the sandy soil only. The organic amendments did not significantly influence diuron and cyhalofop-butyl leaching in either of the soils. The application of organic amendments affected the amounts of dissolved organic matter (DOM) eluted and thus pesticide leaching as a function of soil-type. Nevertheless, in some case, the formation of pesticide-DOM complexes appeared to promote pesticide leaching, thus increasing groundwater contamination risks.     

Process control in municipal solid waste incinerators: survey and assessment.

As there is only rare and scattered published information about the process control in industrial incineration facilities for municipal solid waste (MSW), a survey of the literature has been supplemented by a number of waste incineration site visits in Belgium and The Netherlands, in order to make a realistic assessment of the current status of technology in the area. Owing to the commercial character, and therefore, the confidentiality restrictions imposed by plant builders and many of the operators, much of the information collected has either to be presented in a generalized manner, and in any case anonymously. The survey was focused on four major issues: process control strategy, process control systems, monitors used for process control and finally the correlation between the 850 degrees C/2 s rule in the European waste incineration directive and integrated process control. The process control strategies range from reaching good and stable emissions at the stack to stabilizing and maximizing the energy output from the process. The main indicator to be monitored, in cases in which the focus is controlling emissions, is the oxygen content in the stack. Keeping the oxygen concentration in a determined range (usually between 8 and 12 vol.%) ensures stable and tolerated concentrations of the gaseous emissions. In the case for which stabilization of energy production is the principal aim, the main controlled parameter is the steam temperature and flow-rate, which is usually related to the fuel energetic input. A lot of other parameters are used as alarm criteria, the most common of which is the carbon monoxide concentration. The process control systems used most commonly feature partially automated classical proportional integral derivative (PID) controllers. New and innovative process control systems, such as fuzzy-logic control systems, are still unknown to most plant managers while their performance is reported to be unsatisfactory in plants in which such systems have been tested or are in use. Monitoring components used in process control are still based on classical tools such as thermocouples. The use of modern and more reliable sensors is very limited due to the high initial investment cost or simply the fear of using non-standard technologies. Complying with the 850 degrees C/2 s rule in the European waste incineration directive generally is seen to be a handicap for the process control, either in terms of cost, or flexibility of reaction, or both, particularly in old incineration facilities where such restrictions were not planned in the design.     

Inorganic mercury and methylmercury in surface sediments and mussel tissues from a microtidal lagoon (Bizerte, Tunisia)

The aim of this study was to investigate the distribution of mercury compounds in marine sediments and mussel tissues collected in the lagoon of Bizerte, Tunisia, during two seasons (summer and winter). Inorganic mercury (Hg²⁺) concentrations in sediments were found to be highly variable, ranging from 0.04 nmol.g¹ to 3.22 nmol.g⁻¹ (dry weight) with a mean value of 0.52 nmol.g⁻¹. Anthropogenic sources of Hg²⁺, most probably metallurgy or tire production industries, have been evidenced. The mean concentration of monomethylmercury (MeHg⁺) in the surface sediments is 2.32 pmol g⁻¹ ranging from below the detection limit (0.45 pmol.g⁻¹) to 14.6 pmol.g⁻¹. No significant variation was observed between winter and summer seasons for both mercury species concentration in the sediments. The Hg²⁺ concentrations in mussel tissues are also variable, ranging from 0.007 to 1.347 nmol.g⁻¹ (dry weight). The mean concentration is 0.70 nmol.g⁻¹. In these tisssues, Hg²⁺ is generally the major compound, making up ca. 88% of total mercury concentrations. However, methylmercury concentrations are significant and homogeneous, ranging from 62 to 121 pmol.g⁻¹ (mean 96 pmol.g⁻¹). The results suggest that a fraction of the inorganic mercury load in the sediments of the lagoon undergoes methylation pathways. MeHg⁺ produced is assimilated in the mussels more readily than Hg²⁺.