Use of cement dust in the manufacture of vitrified sewer pipes

Waste by-pass cement dust was added in different percentages ranging from 2% to 10% to a standard mix for sewer pipes manufacture, as a substitute for expensive feldspar. It was found that a mix consisting of 45% kaolin, 36% ball clay, 9% grog and 10% by-pass dust and fired at a temperature of 1300 degrees C for 4 h yielded samples that meet the standards. It was possible to reach a water absorption of 4%, a modulus of rupture of 7.8 MPa and a resistance to acids and alkalis conforming with standard values. A test pipe was fabricated by vacuum extrusion using the suggested composition and was found to withstand a hydraulic pressure of 14 MPa for one minute without the appearance of any cracks.     

Element mobility during metasomatism of granitic rocks in the Saint-Chély d'Apcher area (Lozère,France)

This paper summarises the behaviour of major and trace elements during hydrothermal alteration processes in the Vareilles albite deposit, Saint-Chély d' Apcher area (Lozère, France). Sampling focused mainly on fine- to medium-grained two-mica granite facies surrounding albitite veins in two open pits. The primary chemical variability inherent in sampling parent rock and analytical uncertainties can seriously affect element mobility calculations. Here we present a simple model that allows to discriminate between magmatic and alteration effects and to make a proper evaluation of the chemical changes that have caused the alteration. For this reason, a range of unaltered granites and albitites were sampled to evaluate the degree of parent rock heterogeneity. Duplicate measurements were performed by epithermal neutron activation analysis (ENAA) to obtain a reliable mean concentration for trace elements and to evaluate results reproducibility. ENAA measurements are completed by analysis of major elements by inductively coupled plasma-mass spectrometry (ICP-MS). The enrichment or depletion of an element during alteration, relative to its concentration in fresh parent rock, can be calculated on the basis of the assumed immobility of some elements during the process. In this study, we have assumed Ta as immobile element on the basis for his inert behaviour. The distinct differences in chemical change between altered and unaltered granite suggest the need to consider alteration event as an important parameter in evaluating granitic rocks for nuclear waste disposal.     

Assessment of mammal reproduction for hunting sustainability through community‐based sampling of species in the wild

Wildlife subsistence hunting is a major source of protein for tropical rural populations and a prominent conservation issue. The intrinsic rate of natural increase. (r_max) of populations is a key reproductive parameter in the most used assessments of hunting sustainability. However, researchers face severe difficulties in obtaining reproductive data in the wild, so these assessments often rely on classic reproductive rates calculated mostly from studies of captive animals conducted 30 years ago. The result is a flaw in almost 50% of studies, which hampers management decision making. We conducted a 15‐year study in the Amazon in which we used reproductive data from the genitalia of 950 hunted female mammals. Genitalia were collected by local hunters. We examined tissue from these samples to estimate birthrates for wild populations of the 10 most hunted mammals. We compared our estimates with classic measures and considered the utility of the use of r_max in sustainability assessments. For woolly monkey (Lagothrix poeppigii) and tapir (Tapirus terrestris), wild birthrates were similar to those from captive populations, whereas birthrates for other ungulates and lowland‐paca (Cuniculus paca) were significantly lower than previous estimates. Conversely, for capuchin monkeys (Sapajus macrocephalus), agoutis (Dasyprocta sp.), and coatis (Nasua nasua), our calculated reproductive rates greatly exceeded often‐used values. Researchers could keep applying classic measures compatible with our estimates, but for other species previous estimates of r_max may not be appropriate. We suggest that data from local studies be used to set hunting quotas. Our maximum rates of population growth in the wild correlated with body weight, which suggests that our method is consistent and reliable. Integration of this method into community‐based wildlife management and the training of local hunters to record pregnancies in hunted animals could efficiently generate useful information of life histories of wild species and thus improve management of natural resources.     

Quinoa value chain,adoption, and market assessment in Morocco

Environmental Science and Pollution Research - Agriculture faces many challenges such as climate change, droughts, and salinity, which requires urgent interventions for fast adaptation and...     

Mass-transfer processes of chromium(VI) adsorption onto guava seeds

The chromium(VI) biosorption onto guava seeds, as an alternative method for Cr⁶⁺ removal from aqueous solutions, was investigated. The parameters affecting kinetics and equilibrium of Cr⁶⁺ adsorption onto guava seeds were studied. An external mass-transfer diffusion coefficient k and intra-particle diffusion coefficient k_i were determined to measure the rate-limiting step of adsorption. A single external mass-transfer diffusion model and intra-particle diffusion models were used. The effects of initial pH, sorbent mass, and initial Cr⁶⁺ concentrations on mass-transfer coefficients were investigated. The external mass-transfer coefficient has an average value of 7.2×10^-3 cm s^-1, while the intra-particle mass-transfer diffusion coefficient was 0.34 mg g^-1 min^-0.5. This indicates that external diffusion to the guava seeds surface and intra-particle diffusion are both involved in the sorption process. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models with an average correlation coefficient R²=0.98. The maximum removal of Cr⁶⁺ was obtained at pH 1 (about 100% for adsorbent dose of 15 g l^-1 and 25 mg l^-1 initial concentration of Cr⁶⁺). The results indicated that the guava seeds exhibit acceptable sorption capacity.     

Removal of toxic chromium(VI) from aqueous solution by activated carbon using Casuarina equisetifolia

Highly activated carbon from the seed husk of Casuarina Casuarinas equisetifolia, a worldwide famous plant, have been prepared and tested for the removal of toxic Cr(VI) from its aqueous solution. The adsorbent was investigated for influences of initial chromium concentration (75, 100, 125, and 150 mg l^-1), pH, contact time, and quantity of carbon on removal of Cr(VI) from aqueous solution at room temperature (25±2 °C). The adsorption kinetic of Cr(VI) was studied, and the rates of sorption were found to conform to pseudo-second-order kinetics with a good correlation (R²≥0.99). The Langmuir and Freundlich models fit the isotherm data well. Furthermore, the Gibbs free energy was obtained for each system and was found to be-5.29 kJ mol^-1 for removal of Cr(IV). The negative value of Δ G° indicates the feasibility and spontaneous nature of adsorption. The results indicate that acidic pH (1.05) supported the adsorption of Cr(IV) on activated carbon. The maximum adsorption capacity of Cr(VI) on activated carbon was about 172.4 mg g^-1 at pH 1.05.     

Elaboration of a Bio-Colored Material Based on Natural Dye and Polybutylene Succinate: Comparative Study with Colored Polylactic Acid

Journal of Polymers and the Environment - In the context of sustainable development and natural products valorization, new ecological materials enter a logic aimed at removing the causes of...     

The false alarm/surprise trade-off in weather warnings systems: an expected utility theory perspective

Environment Systems and Decisions - Early warning systems for weather events are becoming widespread as technological capacities develop. For warnings to be effective, they must allow enough lead...     

Polyaniline films for efficient removal of aromatic acids from water

Adsorbents in the form of powders are commonly used to filtrate organic compounds in waters. However, this technique requires the separation of the solid phase from the solution after adsorption experiments. Here we propose the use of films as adsorbents. We synthesized polyaniline films by chemical oxidative polymerization of aniline on red ceramic brick. This film was tested to remove trimellitic, hemimellitic and pyromellitic acids as model molecules of the biodegradation of aquatic humic substances. We evaluated the effect of pH, contact time and initial concentration. Our results show that optimal adsorption conditions required 45 min of solid/liquid contact at pH 7 and an initial concentration of 20 mg/l. The maximum adsorption capacities for hemimellitic, trimellitic and pyromellitic acids are 154.83 for hemimellitic acid, 161.88 for trimellitic acid and 175.26 mg/g for pyromellitic acid. The adsorption efficiency of the polyaniline film decreased only by 13 % after four cycles. Overall, we conclude that polyaniline films are promising separable adsorbents compared to conventional adsorbents for removal of aromatic polycarboxylic acids from water.