Foraminiferal biotopes and their distribution control in Ria de Aveiro (Portugal): a multiproxy approach

Ria de Aveiro, which is located in the centre of Portugal (40° 38′ N, 8° 45′ W), is a well-mixed and complex coastal lagoon that is separated from the sea by a sandy barrier and connects with the Atlantic through an artificial inlet. Tidal currents are the main factor controlling the lagoon’s hydrodynamics and, to a great extent, the sedimentary dynamic. The inner lagoonal zones receive input from several rivers and experience the pressure caused by the accumulation of organic matter and pollutants (namely, trace metals) from diverse anthropic activities. This paper is the first piece of work aiming to recognize, characterize and explain the main benthic foraminiferal biotopes in Ria de Aveiro. To provide a broad overview of this kind of setting, our results are compared to those of previous published studies conducted in similar transitional environments. The research is based on an investigation of 225 sites spread throughout this ecosystem. Utilizing a statistical approach, this study analyses the details of dead benthic foraminiferal assemblages composed of 260 taxa, the texture and composition (mineralogical and geochemical) of the sediment and physicochemical data. On the basis of the results of R-mode and Q-mode cluster analyses, several different biotopes can be defined as marsh biotope/near-marsh biotope; marginal urban/marginal urban mixing biotope; inner-outer lagoon biotope or enclosed lagoon; outer lagoon biotope, mixed sub-biotope; and outer lagoon, marine sub-biotope. These biotopes are related to foraminifera assemblages and substrate type and are influenced by local currents, water depth, chemical and physicochemical conditions, river or oceanic proximity, and anthropogenic impact, as evidenced by the mapping of the six factor loadings of the principal component analysis conducted herein. Based on a similar methodology of analysis as that applied in previous studies in the Lagoon of Venice, comparable biotypes were identified in Lagoon of Aveiro.     

Use of cellular automata in the study of variables involved in land use changes

The study of changes in land use has been included lately in territorial processes in order to optimize future management decisions. The different functions that the territory plays (production, aesthetic, and natural functions, etc.) make planning choices more difficult. This work focuses on the selection and combination of a set of indicators to analyze the variables through which the changes occur in the land used in viticulture for wine production. The proposed approach makes use of the Geographic Information System (GIS) in the development of a map of land use scenario. It is applied to a case study through a model involving cellular automata (CA) implemented with maps of suitability for viticulture and Markov chains. The use in this case of the CA is aimed at validating the scenario map in order to deduce the variables and the orientations of the farmers in the field of wine production.     

Levels, distribution, and risk assessment of organochlorines in surficial sediments of the Red Sea coast, Egypt

The analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in surficial sediment samples collected from 17 locations along with the coast of the Red Sea in Egypt were carried out using gas chromatography–mass spectrometry. Several potential organic contaminants from agricultural (e.g., DDT and its breakdown products, lindane, endrin, dieldrin, and endosulfan) and industrial (PCBs) sources were measured. The levels of 20 organochlorine pesticides (OCPs) and ten PCB congeners in sediment collected from 17 stations along ~1,200 km were investigated. Concentrations of PCBs, HCHs, DDTs, and cyclodienes ranged from 0.40 to 6.17, 0.01 to 0.09, n.d. to 0.46, and 0.08 to 0.90 ppb dry weight. Two statistical programs were applied on the data (principal component analysis, PCA, and cluster analysis, CA), and it was concluded that it is impossible to predict the distribution patterns of the OCPs in a contaminated area. Risk assessment of the organochlorines contaminated in the sediments of the studied area was investigated.     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Process control in municipal solid waste incinerators: survey and assessment.

As there is only rare and scattered published information about the process control in industrial incineration facilities for municipal solid waste (MSW), a survey of the literature has been supplemented by a number of waste incineration site visits in Belgium and The Netherlands, in order to make a realistic assessment of the current status of technology in the area. Owing to the commercial character, and therefore, the confidentiality restrictions imposed by plant builders and many of the operators, much of the information collected has either to be presented in a generalized manner, and in any case anonymously. The survey was focused on four major issues: process control strategy, process control systems, monitors used for process control and finally the correlation between the 850 degrees C/2 s rule in the European waste incineration directive and integrated process control. The process control strategies range from reaching good and stable emissions at the stack to stabilizing and maximizing the energy output from the process. The main indicator to be monitored, in cases in which the focus is controlling emissions, is the oxygen content in the stack. Keeping the oxygen concentration in a determined range (usually between 8 and 12 vol.%) ensures stable and tolerated concentrations of the gaseous emissions. In the case for which stabilization of energy production is the principal aim, the main controlled parameter is the steam temperature and flow-rate, which is usually related to the fuel energetic input. A lot of other parameters are used as alarm criteria, the most common of which is the carbon monoxide concentration. The process control systems used most commonly feature partially automated classical proportional integral derivative (PID) controllers. New and innovative process control systems, such as fuzzy-logic control systems, are still unknown to most plant managers while their performance is reported to be unsatisfactory in plants in which such systems have been tested or are in use. Monitoring components used in process control are still based on classical tools such as thermocouples. The use of modern and more reliable sensors is very limited due to the high initial investment cost or simply the fear of using non-standard technologies. Complying with the 850 degrees C/2 s rule in the European waste incineration directive generally is seen to be a handicap for the process control, either in terms of cost, or flexibility of reaction, or both, particularly in old incineration facilities where such restrictions were not planned in the design.     

Inorganic mercury and methylmercury in surface sediments and mussel tissues from a microtidal lagoon (Bizerte, Tunisia)

The aim of this study was to investigate the distribution of mercury compounds in marine sediments and mussel tissues collected in the lagoon of Bizerte, Tunisia, during two seasons (summer and winter). Inorganic mercury (Hg²⁺) concentrations in sediments were found to be highly variable, ranging from 0.04 nmol.g¹ to 3.22 nmol.g⁻¹ (dry weight) with a mean value of 0.52 nmol.g⁻¹. Anthropogenic sources of Hg²⁺, most probably metallurgy or tire production industries, have been evidenced. The mean concentration of monomethylmercury (MeHg⁺) in the surface sediments is 2.32 pmol g⁻¹ ranging from below the detection limit (0.45 pmol.g⁻¹) to 14.6 pmol.g⁻¹. No significant variation was observed between winter and summer seasons for both mercury species concentration in the sediments. The Hg²⁺ concentrations in mussel tissues are also variable, ranging from 0.007 to 1.347 nmol.g⁻¹ (dry weight). The mean concentration is 0.70 nmol.g⁻¹. In these tisssues, Hg²⁺ is generally the major compound, making up ca. 88% of total mercury concentrations. However, methylmercury concentrations are significant and homogeneous, ranging from 62 to 121 pmol.g⁻¹ (mean 96 pmol.g⁻¹). The results suggest that a fraction of the inorganic mercury load in the sediments of the lagoon undergoes methylation pathways. MeHg⁺ produced is assimilated in the mussels more readily than Hg²⁺.     

Effects of cyanobacteria producing microcystins on seed germination and seedling growth of several agricultural plants

The effects of cyanobacteria aqueous extracts containing Microcystin-LR (MC-LR) on the seed germination and growth of Pisum sativum, Lens esculenta, Zea mays and Triticum durum were investigated. Experiments were carried out on a range of doses of the extract (equivalent to 0, 1.6, 2.9, 5.8, 8.7 and 11.6 μ g MC-LR/mL). The results confirm that these plants were sensitive to cell-free extracts of a toxic Microcystis and that germination inhibition was dose dependent. One-way analysis of variance (ANOVA) showed that P. sativum is the most sensitive tested species with a 97% germination rate reduction and L. esculenta was the most resistant. At the 8th day, the exposure to the microcystins (MC) resulted in a significant decrease of plant epicotyls length, roots length and a net inhibition of lateral root formation. It is concluded that MC could affect also terrestrial plants seedling germination and growth. Therefore, the use of water for irrigation contaminated by MC could exert negative biochemical effects on seed and plant metabolism which might influence the agricultural crops.