Geochemical speciation of trace metals in sediments of the northern Nile Delta Lake by sequential extraction technique

ABSTRACT

The present study was performed to investigate surface sediment samples from Lake Edku of the Nile Delta Lagoons, Egypt. The Lake is important for fishing in the region. The importance of research is to understand the mobility and bioavailability of each studied metal. The study was carried out on 10 sampling sites during 2017. The sediments were subjected to the technique of sequential extraction to examine the chemical forms of some trace metals (Fe, Mn, Zn, Cu, Pb and Ni). Five stage extractions were done as the following order: soluble and exchangeable, carbonate, iron and manganese oxides, organic matter fraction and residual fraction. Attained results from the five fractions showed variations in the concentrations of metal contents of different sites under study. The overall metal concentrations (%) in the initial four extractable fractions (exchangeable, carbonate, oxides and organic matter fractions) were assessed to configure the mobility of each studied metal. The risk assessment code (RAC) represents the summation of exchangeable and carbonate fractions, it was between low and medium risk for aquatic environment. The range percentage of RAC for the metals was in the following order: 1.8–13, 4–23.5, 15–26, 5.7–19.5, 9–25 and 4.8–18.2 for Fe, Mn, Zn, Cu, Pb and Ni, respectively. Approximately 30% of the total copper was associated to the organic fraction, which may represent a high mobility of copper in these sediments. The highest mobility of metals in the sediments could be confirmed by its bioavailability factor (BF), which was within the ranges of 0.32–0.61, 0.36–0.59, 0.64–0.83, 0.36–0.72, 0.37–0.62 and 0.52–0.78 for Fe, Mn, Zn, Cu, Pb and Ni, respectively. The BF exhibited the following order: Zn > Ni > Cu > Pb ≈ Mn?>?Fe. The high levels of BF for the studied metals may represent the potentiality for toxic metals to be easily released into the aquatic environment.     

Energy conservation and waste utilization in the cement industry serve the green technology and environment

The cement industry is one of the most energy-intensive industries consuming 4 GJ/ton of cement, i.e. 12–15% of the energy use in total industry. Energy cost accounts for 30% of the total cost of cement production. Seventy-five per cent of this energy is due to the thermal energy for clinker production. It is also found that 35% of this supplied thermal energy is lost in flue gas streams. Most modern kilns use pet coke or coal as their primary fuel. Instead, the municipal waste in landfills offer a cheap source of energy and reduce the environmental effects of dumping solid waste. The calcination and drying processes and the kiln need large quantities of thermal energy. About 40% of the total energy input is lost in the hot flue gases and cooling the stack plus the kiln shell. Hence, it is suitable to use an organic Rankine cycle (ORC) to recover the exhaust energy from the kiln. Alternatively, a 15 MW gas turbine engine combined with a steam turbine could be utilized. It was found that ORC produces 5 MW with a capital cost recovery period of 1.26 years. However, the gas turbine combined system produces 21.45 MW with a maximum recovery period of 2.66 years.     

Deleterious effects of cypermethrin on rat liver and kidney: protective role of sesame oil

The involvement of reactive oxygen species (ROS) has been implicated in the toxicity of various pesticides. Our study was designed to investigate the induction of oxidative stress by cypermethrin; a Type II pyrethroid in rat liver and kidney. In addition, the protective role of sesame oil against the toxicity of cypermethrin was investigated. Animals were divided into four equal groups; the first group used as control while groups 2, 3 and 4 were treated with sesame oil (5 mL/kg b.w), cypermethrin (12 mg/kg b.w) and the combination of both sesame oil (5 mL/kg b.w) plus cypermethrin (12 mg/kg b.w), respectively. Rats were daily administered with their respective doses for 30 days by gavage. Repeated oral administration of cypermethrin was found to reduce the level of glutathione (GSH) and the activities of the antioxidant enzymes. While, the level of TBARS was elevated indicating the presence of oxidative stress. The activities of LDH, AST and ALT were decreased in the liver extract while increased in the plasma of the cypermethrin-treated group. Also, the levels of urea and creatinine were significantly increased after treatment with cypermethrin. Liver and kidney injury was confirmed by the histological changes. In conclusion, the administration of sesame oil provided significant protection against cypermethrin-induced oxidative stress, biochemical changes, histopathological damage and genomic DNA fragmentation.     

Chlorpyrifos insecticide uptake by plantain from polluted water and soil

Chlorpyrifos is a common organophosphorus insecticide used for crop protection. Chlorpyrifos use has induced heath issues and water pollution. Such issues may be solved by phytoremediation, which is the use of plants for the cleanup of pollutants. Here, we tested Plantago major L. to clean water and soils under laboratory conditions. Results show that the concentration of chlorpyrifos residues after 5 days exposure reached 36.86 μg/g in roots and 13.93 μg/g in upper plant tissues. Gas chromatography–mass spectrometry (GC–MS) analysis of chlorpyrifos metabolites suggests the formation of 3, 5, 6-trichloro-2-pyridinol (TCP) and diethyl 3,5,6-trichloropyridin-2-yl phosphate (chlorpyrifos-oxon). Chlorpyrifos-oxon was detected in the roots and the leaves after 2 h of testing. After 24 h of testing, the degradation product chlorpyrifos-oxon increased in the roots and the leaves then decreased gradually until the end of testing. TCP levels increased gradually to 192 h then decreased until the end of testing.     

Atmospheric deposition of major and trace elements in Amman, Jordan

Wet and dry deposition samples were collected in the capital of Jordan, Amman. Concentrations of Al, Ba, Bi, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, V, Zn, Fe, Sr, Mg²⁺, Ca²⁺, Na⁺, K⁺, Cl⁻, NO₃ ⁻ and SO₄ ²⁻, along with pH were determined in collected samples. Mean trace metal concentrations were similar or less than those reported for other urban regions worldwide, while concentrations of Ca²⁺ and SO₄ ²⁻ were among the highest. High Ca²⁺ concentrations were attributed to the calcareous nature of the local soil and to the influence of the Saharan dust. However, high SO₄ ²⁻ concentrations were attributed to the influence of both anthropogenic and natural sources. Except for Cl⁻, NO₃ ⁻, SO₄ ²⁻ and Cu, monthly dry deposition fluxes of all measured species were higher than wet deposition fluxes. The annual wet deposition fluxes of trace metals were much lower than those reported for other urban areas worldwide.     

Deleterious effects of cypermethrin on rat liver and kidney: Protective role of sesame oil

The involvement of reactive oxygen species (ROS) has been implicated in the toxicity of various pesticides. Our study was designed to investigate the induction of oxidative stress by cypermethrin; a Type II pyrethroid in rat liver and kidney. In addition, the protective role of sesame oil against the toxicity of cypermethrin was investigated. Animals were divided into four equal groups; the first group used as control while groups 2, 3 and 4 were treated with sesame oil (5 mL/kg b.w), cypermethrin (12 mg/kg b.w) and the combination of both sesame oil (5 mL/kg b.w) plus cypermethrin (12 mg/kg b.w), respectively. Rats were daily administered with their respective doses for 30 days by gavage. Repeated oral administration of cypermethrin was found to reduce the level of glutathione (GSH) and the activities of the antioxidant enzymes. While, the level of TBARS was elevated indicating the presence of oxidative stress. The activities of LDH, AST and ALT were decreased in the liver extract while increased in the plasma of the cypermethrin-treated group. Also, the levels of urea and creatinine were significantly increased after treatment with cypermethrin. Liver and kidney injury was confirmed by the histological changes. In conclusion, the administration of sesame oil provided significant protection against cypermethrin-induced oxidative stress, biochemical changes, histopathological damage and genomic DNA fragmentation.     

Tailoring a non-path-dependent model for environmental risk management and polycentric urban land-use planning

This study attempts to develop a non-path-dependent model for environmental risk management and polycentric urban land-use planning in Gorgan Township area, Iran. Applying three suitability layers of environmental risk (soil erosion, flood risk, fire risk, and land susceptibility), urbanization potential, and integrated surface (environmental risk plus urbanization potential layers), a non-path-dependent Cellular Automata-Markov Chain (CA-MC) model was configured to execute three scenarios of polycentric urban growth allocation. Specifically, the modeling approach improved the traditional functionality of the CA-MC model from a prediction algorithm into an innovative land allocation tool. Besides, due to its flexibility, the non-path-dependent model was able to explicitly include different characteristics of the landscape structure ranging from physical land attributes to landscape functions and processes (natural hazards). Accordingly, three polycentric urban growth allocation efforts were undertaken and compared in terms of connectivity and compactness of the resultant patterns and consumption of other land resources. Based on results, the polycentric allocation procedure based on integrated suitability layer produced a more manageable pattern of urban landscape, while the growth option based on environmental risk layer was more successful for protecting farmlands against excessive urbanization. This study suggests that polycentric urban land-use planning under the strategy of rural land development programs is an available option for designing an urban landscape with lower exposure to natural hazards and more economic benefits to rural residents. Finally, the non-path-dependent modeling is a recommended approach, when highly flexible and interactive decision-support systems as well as trend-breaking scenarios are desired.     

Spatial pattern analysis in Persian oak (Quercus brantii var. persica) forests on B&W aerial photographs

The purpose of this investigation was to develop a method to determine the spatial pattern of trees as a robust indicator to monitor changes from B&W aerial photographs in Persian oak forests of Zagros, Iran. A 500 x 600 m study area was selected in Servak forests next to Yasuj city in Kohgiluyeh-Va-BuyerAhmad Province. All the trees were tagged in the study area and the point map of stems were prepared. The spatial distribution of trees was determined as "dispersed" using nearest neighbour technique. Then the index of "C" calculated by T-square sampling method was applied to the point map of the study area in 30 systematic sample points in a 100 x 100 m network. Comparing the results of this method with the true spatial pattern of the study area showed that "C" can detect the spatial arrangement of trees. Thereafter the index was used on the air photo of the study area that was made of B&W aerial photographs. The method suggested in this study provides a suitable approach for detecting the spatial pattern of trees in Zagros forests on B&W air photos.     

Eco-Friendly, Vascular Shape and Interpenetrating Poly (Acrylic Acid) Grafted Pectin Hydrogels; Biosorption and Desorption Investigations

The synthesis and characterization of poly (acrylic acid) grafted pectin hydrogel followed by biosorption and desorption characteristics of cadmium, as a model heavy metal, have been studied. The grafted eco-friendly pectin based interpenetrating hydrogel was prepared in the presence of gluteraldehyde crosslinker under N₂ atmosphere and characterized using ¹H-NMR, FTIR, TGA and SEM techniques. Gluteraldehyde was found to form one-arm and two-arm crosslinks in the copolymer. Upon grafting, two-dimensional sheet structures bounded to tubular and vascular cylindrical rods were observed. The biosorption and desorption data, determined experimentally, were fitted to pseudo-second order reaction kinetics. At higher ionic strength values, the maximum metal uptake value (q _max) was lowered and pseudo-second order rate constant (k ₂) was increased. Whereas, at higher pH values the maximum metal uptake value (q _max) was increased and Pseudo-second order rate constant (k ₂) was decreased. 0.1?M HCl solution was a suitable eluent to regenerate the hydrogel surface and recover the adsorbed cadmium metal ions. Pectin based copolymer could be used as an efficient candidature biosorbent for the recovery of cadmium metal ions from aqueous solutions.