Thermodynamics of metal cation binding by a solid soil derived humic acid. 2. Binding of Mn(II), Co(NH3)6aq3+ and Hg(II)

Metal binding is an important function of humic acids (HAs) in soils, sediments and waters. At pH 2.0, Mn(II) and Co(NH3)6aq3+ bind tightly in one step labeled A to a solid humic acid NHA isolated from a New Hampshire soil. Two consecutive steps are observed for Hg(II) binding. All the binding isotherms fit the Langmuir model in the temperature range 10.0-50.0 degrees C. Stoichiometric site capacities indicate predominant binding by charge-neutralizing HA carboxylate groups for Mn(II) and the second step A of Hg(II) binding. The binding affinity order in step A is Co(NH3)(6)3+>Hg(II)>Mn(II). Metal binding enthalpy and entropy changes fit the linear correlation found previously for binding of other metal cations by solid HAs. Free energy buffering from cooperative enthalpy and entropy changes and lower enthalpies for metal-HA interactions in solution suggest that desolvation of the cations and HA binding sites as well as HA conformational changes to allow for inner-sphere complexation predominate metal binding by hydrated solid HAs.     

Comparison of unmodified and modified BCR sequential extraction schemes for the fractionation of heavy metals in shrimp aquaculture sludge from Selangor, Malaysia

A study was carried out to investigate the fractionation of Cd, Cr, Cu, Fe, Mn, Pb, and Zn in shrimp aquaculture sludge from Selangor, Malaysia, using original (unmodified) and modified four-steps BCR (European Community Bureau of Reference, now known as the Standards Measurements and Testing Program) sequential extraction scheme. Step 2 of the unmodified BCR procedure (subsequently called Method A) involves treatment with 0.1 M hydroxylammonium chloride at pH 2, whereas 0.5 M hydroxylammonium chloride at pH 1.5 was used in the modified BCR procedure (subsequently called Method B). Metal analyses were carried out by flame atomic absorption spectrometry. A pseudo-total aqua-regia digest of BCR CRM 701 has also been undertaken for quality assurance purposes. The recovery of Method A for all metals studied ranges from 96.14% to 105.26%, while the recovery for Method B ranges from 95.94% to 122.40%. Our results reveal that Method A underestimated the proportion of metals bound to the easily reducible fraction except for copper. Therefore, the potential mobility of these elements is higher than others. Thus, to use this sludge as a fertilizer we have to first find a remediation for reduction of heavy metal contamination.     

Microwave-assisted synthesized zinc nanoparticles attenuate cisplatin-induced testicular toxicity in mice

Abstract

The purpose of this study was to investigate the protective effects of zinc nanoparticles against cisplatin-induced testicular toxicity in mice. Zinc nanoparticles were produced by microwave-assisted synthesis using Lavandula vera extract as reducing agent. Single doses of cisplatin (7?mg/kg, intraperitoneally) and ZnSO₄ (10?mg/kg, orally), and various doses of zinc nanoparticles (10???50?mg/kg, orally) and vitamin E (100?mg/kg, interaperitoneally) were administered. The protective role of zinc nanoparticles was determined biochemically and histologically. Gradual reduction in malondialdehyde levels and elevation in glutathione levels and in the activities of superoxide dismutase and catalase upon administration of zinc nanoparticles were observed. The pathology of mice treated with cisplatin/vitamin E and cisplatin/zinc nanoparticles were apparently equal, but vitamin E treatment was more effective in lowering oxidative stress markers than zinc nanoparticles. These findings suggest that co-administration of zinc nanoparticles with cisplatin could prevent adverse effects on the male reproductive system via their potential antioxidant properties.     

Immobilization of copper ions laden kaolin waste: influence of thermal treatment on its immobilization in cement paste

This work aims to study the influence of thermal treatment of Cu²⁺ laden kaolin wastes on its immobilization efficiency in cement paste. Compressive strength and toxicity characteristic leaching procedure (TCLP) of 5–20 % kaolin waste blended cement pastes were tested. X-ray diffraction (XRD) results illustrate that adsorption of Cu²⁺ ions modify the crystal structure of kaolinite mineral. Fourier transform infrared (FTIR) results indicate that the adsorption sites on the kaolin surface that were occupied with free water molecules have been replaced with Cu²⁺ ions adsorbed from aqueous solutions. The thermal treatment of kaolin waste improves fixation ratio of Cu²⁺ in cement pastes containing up to 20 % of thermally treated waste. This is due to: pozzolanic activity of calcined kaolin, conversion of leachable adsorbed Cu²⁺ ions into encapsulated unleachable phase that does not retard the hydration of cement as well as adsorption of much of leachable Cu²⁺ ions on surfaces of hydration products and occlusion in its lattice structure as illustrated from XRD, FTIR, thermogravimetric, scanning electron microscopy and TCLP results. The fixation ratio of Cu²⁺ in cement paste blended with 20 % of thermally treated kaolin waste, reaches maximum value of about 97 % compared to 82 % for cement paste blended with 20 % of untreated kaolin waste.     

Synthesis and characterization of chitosan-supported Fe2O3 nanohybrids for rapid sonophotocatalytic degradation of 2,4,6-trichlorophenol

Environmental Science and Pollution Research - The present study reports the design of heterogeneous photocatalytic system using Fe2O3 with chitosan (CS) as a matrix for the sonophotocatalytic...     

Modeling and Mapping of Soil Salinity and Alkalinity Using Remote Sensing Data and Topographic Factors: a Case Study in Iran

Environmental Modeling & Assessment - Soil salinity and alkalinity seriously threaten crop production, soil productivity, and sustainable agriculture, especially in arid and semi-arid areas,...     

Preconcentration of samarium with modified yeast cells for its determination by atomic emission spectroscopy

A chelating-modified biosorbent is produced by coupling of a dye, procion red, to yeast cells. The resulting modified cells have been characterized by Fourier transform infrared, elemental analysis and thermogravimetric analysis and studied for preconcentration and determination of trace Sm(III). The optimum pH value for sorption of the samarium ions is 6.2. The sorption capacity of functionalized modified yeast cells is 7.2 mg g^?1. Recovery was 99% when Sm(III) was eluted with an aqueous solution of 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis suggested that binding sites were homogeneous. The equilibrium data were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models, and the respective constants were determined as 1.0 (L mg^?1), 2.9 [(mg g^?1) (L mg^?1)^1/n], 2.4 × 10⁸ (L g^?1), and 30 (dm³ g^?1) at 20 °C. The method was applied for an Sm(III)-containing sample of ceramic industry effluent.     

Indigenous knowledge on use values of Karvan district plants,Iran

Traditional and indigenous knowledge on plants usage is a valuable source of information from cultural and natural perspectives, reflecting society’s complicated and close relationship with the environment. Communities have a valuable source of traditional knowledge on the utilization of natural resources, and it is worth to be documented and preserved for current and future applications. We conducted this research to collect and identify plant species of Karvan District and document the traditional knowledge on their use and consumption values. Regarding the results, 150 plant species are used by local communities, more than 30 % of which are directly consumed as food, 24 % (37 species) are used as medicinal plants, and 16.3 % are applied for decoration purposes; 58.6 % of the species are consumed in the raw form, and the remaining is processed before consumption. Leaves (35 %), seeds (21 %) and flowers (21 %) are the most frequent parts of the plants that are used. High number of young emigrants to industrialized areas in seek of job opportunities is threatening this precious source of indigenous knowledge. Attempts to preserve this empirical source of information by encouraging trans-generational knowledge transmission would help to maintain it for future applications.     

Modification of photocatalytic property of BaTiO3 perovskite structure by Fe2O3 nanoparticles for CO2 reduction in gas phase

In this work, perovskite structure of BaTiO₃ was coupled with Fe₂O₃ in different molar ratios achieving the best photocatalytic performance of CO₂ reduction in the presence of CH₄ as reducing agent; both of them are main greenhouse gases. The photocatalysts were synthesized by facile hydrothermal method. The samples were characterized by XRD, FTIR, FESEM, EDX, UV–Vis DRS, and photoluminescence (PL) analyses. The BaTiO₃ synthesized in this research showed a weak PL signal which is due to the intrinsic ferroelectric property as has been observed in previous reports. Compared to the pure BaTiO₃ and Fe₂O₃, the heterojunctions exhibited enhanced photocatalytic activity. The maximum CO₂ reduction under visible light irradiation was obtained to be 22% during 60 min process time. The enhanced photocatalytic activity could be attributed to the increased optical absorption, the good separation, and immigration of photogenerated charge carriers that decreased the recombination rate of charge carriers in the n–n heterojunction.

     

Application of sludge-based carbonaceous materials in a hybrid water treatment process based on adsorption and catalytic wet air oxidation

This paper describes a preliminary evaluation of the performance of carbonaceous materials prepared from sewage sludges (SBCMs) in a hybrid water treatment process based on adsorption and catalytic wet air oxidation; phenol was used as the model pollutant. Three different sewage sludges were treated by either carbonisation or steam activation, and the physico-chemical properties of the resultant carbonaceous materials (e.g. hardness, BET surface area, ash and elemental content, surface chemistry) were evaluated and compared with a commercial reference activated carbon (PICA F22). The adsorption capacity for phenol of the SBCMs was greater than suggested by their BET surface area, but less than F22; a steam activated, dewatered raw sludge (SA_DRAW) had the greatest adsorption capacity of the SBCMs in the investigated range of concentrations (<0.05 mol L^?1). In batch oxidation tests, the SBCMs demonstrated catalytic behaviour arising from their substrate adsorptivity and metal content. Recycling of SA_DRAW in successive oxidations led to significant structural attrition and a hardened SA_DRAW was evaluated, but found to be unsatisfactory during the oxidation step. In a combined adsorption–oxidation sequence, both the PICA carbon and a selected SBCM showed deterioration in phenol adsorption after oxidative regeneration, but a steady state performance was reached after 2 or 3 cycles.