The capital shortage phenomenon : Its impact on the US mineral industries

After examining the concept of a capital shortage, the author analyses the impacts of sectoral shortages in the mineral industries. He analyses the future capital needs of certain segments of the mineral industries and the prospects open to them. Finally, the author discusses some policy proposals to stimulate investment. These include the reduction of corporate tax, increasing investment tax credit, changing depreciation allowances to allow for inflation, and changing the tax treatment of capital gains.     

Does a ‘notched’ nuchal translucency indicate Down syndrome fetuses or other adverse pregnancy outcome?

The aim of the present study was to assess the sonographic contour of the increased nuchal translucency (NT) and to correlate this with pregnancy outcome. Fifty sonographic images of fetuses with increased NT [>95th centile thickness of the normal range for crown–rump length (CRL) between 38 and 84 mm] were retrospectively assessed. In all the cases a complete pregnancy and even infancy follow-up (<36 months) was available. The NT appearances were subdivided into two forms: a ‘notched’ or ‘uniform’ appearance. The images were correlated with karyotype results [trisomy 21 (DS) vs euploid cases] and pregnancy outcome. Complicated outcomes were classified as being either DS fetuses, miscarriage or termination of pregnancy because of structural anomaly. Thus 30/35 (86%) of the euploid fetuses had a ‘uniformly’ increased NT, whereas 8/13 DS cases (62%) had a ‘notched’ appearance (Fisher's exact test, p=0.004). Additionally, 27/29 fetuses (93%) which had an uneventful pregnancy outcome had a ‘uniform’ increased NT, whereas 12/26 (57%) of the fetuses which had adverse pregnancy outcome had a ‘notched’ appearance of their NT (Fisher's exact test, p<0.001). Although it was not possible to correlate the sonographic data with post-evacuation microdissection findings, it is possible that a uniformly shaped, increased NT may be more representative of a developmental delay in a normal fetus. Conversely, a ‘notched’ nuchal surface may represent abnormal lymphatic or cardiovascular development more commonly seen in DS fetuses. Copyright © 2001 John Wiley & Sons, Ltd.     

Experimental investigation of the machining induced residual stress tensor under mechanical loading

Residual stress induced by machining is complex and difficult to predict, since it involves mechanical loads, temperature gradients or phase transformation in the generation mechanism. In this work, an experiment with a statistical design for the residual stress tensor was performed to investigate the residual stress profile on a machined surface. In order to understand the generation mechanism of residual stress in machining, three variables and workpiece materials were carefully selected to focus on the mechanical loads and avoid the temperature gradients and phase transformation on the machined surface. The mechanical loads considered here included the chip formation force at the primary shear zone and the plowing force at the tool tip–workpiece contact. Depths of cut and rake angles were selected to alter the chip formation force, and the tool tip radius was designed to emphasize the plowing effect. The workpiece material was aluminum 3003. The experimental results showed that the chip formation force provides basic shapes of the residual stress profile for a machined surface. It decides the depth of the peak residual stress below the surface. However, the plowing force was the dominating effect on the surface residual stress, causing high stresses on the surface. The plowing force can shift the surface stress from tensile to compressive. Additionally, the measured stress tensor proved that in-plane shear stress exists for the machined surface.     

Traits, not origin, explain impacts of plants on larval amphibians

Managing habitats for the benefit of native fauna is a priority for many government and private agencies. Often, these agencies view nonnative plants as a threat to wildlife habitat, and they seek to control or eradicate nonnative plant populations. However, little is known about how nonnative plant invasions impact native fauna, and it is unclear whether managing these plants actually improves habitat quality for resident animals. Here, we compared the impacts of native and nonnative wetland plants on three species of native larval amphibians; we also examined whether plant traits explain the observed impacts. Specifically, we measured plant litter quality (carbon : nitrogen : phosphorus ratios, and percentages of lignin and soluble phenolics) and biomass, along with a suite of environmental conditions known to affect larval amphibians (hydroperiod, temperature, dissolved oxygen, and pH). Hydroperiod and plant traits, notably soluble phenolics, litter C:N ratio, and litter N:P ratio, impacted the likelihood that animals metamorphosed, the number of animals that metamorphosed, and the length of larval period. As hydroperiod decreased, the likelihood that amphibians achieved metamorphosis and the percentage of tadpoles that successfully metamorphosed also decreased. Increases in soluble phenolics, litter N:P ratio, and litter C:N ratio decreased the likelihood that tadpoles achieved metamorphosis, decreased the percentage of tadpoles metamorphosing, decreased metamorph production (total metamorph biomass), and increased the length of larval period. Interestingly, we found no difference in metamorphosis rates and length of larval period between habitats dominated by native and nonnative plants. Our findings have important implications for habitat management. We suggest that to improve habitats for native fauna, managers should focus on assembling a plant community with desirable traits rather than focusing only on plant origin.     

Predicting national sustainability: The convergence of energetic,economic and environmental realities

The “constraint space” dictated by energetic, economic and environmental realities on scenarios for future organization of humanity and nature is explored from the perspective of the energy and resources driving economies. Net energy of energy sources is presented as an index (Emergy Yield Ratio; EYR) that must be evaluated for energy sources to better understand their potential contributions to society, but more important, as an indicator of the changes needed in the future if lower net yielding sources are to be relied upon. An aggregate EYR was calculated for the USA economy and shown to have decreased by 38% since 1950, from 11/1 to 6.8/1. Several measures of efficiency at the scale of national economies are explored and the data suggest that the most efficient economies are also the most energetically intense (as measured by empower intensity). An index of environmental loading is suggested as a measure to evaluate environmental efficacy. An obvious outcome is that the smallest most energetically intense countries have the highest environmental loads, and those with large land area and/or continental shelves have the lowest ratios. An Emergy Sustainability Index (EmSI) is defined, computed for countries, and proposed as a multi-dimensional measure of long-term sustainability. The most sustainable economies are those with the highest EYR and lowest environmental loads.     

Long range transport of fine particle windblown soils and coal fired power station emissions into Hanoi between 2001 to 2008

Fine particulate matter (PM_2.5), source fingerprints and their contributions have been measured and reported previously at Hanoi, Vietnam, from 25 April 2001 to 31 December 2008. In this study back trajectories are used to identify long range transport into Hanoi for two of these sources, namely, windblown dust (Soil) from 12 major deserts in China and emissions from 33 coal fired power plants (Coal) in Vietnam and China. There were 28 days of extreme Soil events with concentrations greater than 6 μg m^?3 and 25 days of extreme Coal with concentrations greater than 30 μg m^?3 from a total of 748 sampling days during the study period. Through the use of back trajectories it was found that long range transport of soil from the Taklamakan and Gobi desert regions (more than 3000 km to the north west) accounted for 76% of the extreme events for Soil. The three local Vietnamese power stations contributed to 15% of the extreme Coal events, while four Chinese power stations between 300 km and 1700 km to the north-east of Hanoi contributed 50% of the total extreme Coal events measured at the Hanoi sampling site.     

Interstate Compacts—An Evaluation

This paper discusses the development of interstate compacts and legal and constitutional principles which are applicable thereto for the purpose of evaluating compacts as an effective legal mechanism for joint action on an interstate basis to control air pollution. It suggests there is no inherent reason why, presupposing fundamental agreements as to the basic policy to be served by the compacting states, an effective compact cannot be concluded. The paper also discusses the various criticisms that have been leveled against interstate compacts and some of the pitfalls now existing in interstate compacts in the field of water pollution. The discussion mentions certain caveats to be considered in drafting effective compacts to control air pollution. The compact mechanism does not possess inherent infirmities which preclude its effective use in the field of air pollution control, but whatever infirmities may exist are traceable to underlying factors of an essentially nonlegal nature.     

Consistency of Ozone and Nitrogen Oxides Standards at Tropospherically Relevant Mixing Ratios

Abstract

The absolute accuracy and long‐term precision of atmospheric measurements hinge on the quality of the instrumentation and calibration standards. To assess the consistency of the ozone (O₃) and nitrogen oxides (NO_x) standards maintained at the National Institute of Standards and Technology (NIST), these standards were compared through the gas‐phase titration of O3 with nitric oxide (NO). NO and O₃ were monitored using chemiluminescence and UV absorption, respectively. Nitrogen dioxide (NO₂) was monitored directly by laser‐induced fluorescence and indirectly by catalytic conversion to NO, followed by chemiluminescence. The observed equivalent loss of both NO and O₃ and the formation of NO₂ in these experiments was within 1% on average over the range of 40–200 nmol mol^?1 of NO in excess O3, indicating that these instruments, when calibrated with the NIST O₃ and NO standards and the NO₂ permeation calibration system, are consistent to within 1% at tropospherically relevant mixing ratios of O₃. Experiments conducted at higher initial NO mixing ratios or in excess NO are not in as good agreement. The largest discrepancies are associated with the chemiluminescence measurements. These results indicate the presence of systematic biases under these specific conditions. Prospects for improving these experiments are discussed.     

Preparing to Measure the Effects of the NOx SIP Call— Methods for Ambient Air Monitoring of NO,NO2, NOy,and Individual NOz Species

Abstract

The capping of stationary source emissions of NO_x in 22 states and the District of Columbia is federally mandated by the NO_x SIP Call legislation with the intended purpose of reducing downwind O₃ concentrations. Monitors for NO, NO₂, and the reactive oxides of nitrogen into which these two compounds are converted will record data to evaluate air quality model (AQM) predictions. Guidelines for testing these models indicate the need for semicontinuous measurements as close to real time as possible but no less frequently than once per hour. The measurement uncertainty required for AQM testing must be less than ±20% (±10% for NO₂) at mixing ratios of 1 ppbv and higher for NO, individual NO_z component compounds, and NO_y. This article is a review and discussion of different monitoring methods, some currently used in research and others used for routine monitoring. The performance of these methods is compared with the monitoring guidelines. Recommendations for advancing speciated and total NO_y monitoring technology and a listing of demonstrated monitoring approaches are also presented.