The three-dimensionality of obstructed shear flows

Obstructed shear flows (i.e. those over permeable media) are common in the environment. An archetypal example, flow over a submerged vegetation canopy, is investigated here. Like any flow through complex geometry, canopy flows are characterised by strong spatial gradients. The focus of this experimental study is the three-dimensionality of aquatic canopy flow, in particular that of the coherent interfacial vortices that govern mixing into and out of the canopy. It is shown here that the vortices have a finite lateral scale that is comparable to their vertical scale; both are of the order of the drag length scale of the canopy, (C _D a)⁻¹, where a is the frontal area density and C _D is a bulk drag coefficient. The finite lateral extent of the vortices generates strong lateral hydrodynamic gradients, both instantaneously and in the long-term. The instantaneous gradients, which can contribute greatly to the dispersion of dissolved and particulate species, are far more pronounced. Finally, the potential for canopies to generate differential roughness secondary circulation is examined. In the consideration of vertical scalar transport, this circulation can be of the same order as turbulent diffusion.     

Influence of the secondary motions on pollutant mixing in a meandering open channel flow

This paper presents large eddy simulation of turbulent flow in a meandering open channel with smooth wall and rectangular cross-section. The Reynolds number based on the channel height is 40,000 and the aspect ratio of the cross-section is 4.48. The depth-averaged mean stream-wise velocity agree well to experimental measurements. In this specific case, two interacting cells are formed that swap from one bend to the other. Transport and mixing of a pollutant is analysed using three different positions of release, e.g. on the inner bank, on the outer bank and on the centre of the cross section. The obtained depth-average mean concentration profiles are reasonably consistent with available experimental data. The role of the secondary motions in the mixing processes is the main focus of the discussion. It is found that the mixing when the scalar is released on the centre of the cross-section is stronger and faster than the mixing of the scalar released on the sides. When the position of release is close to a bank side, the mixing is weaker and a clear concentration of scalar close to the corresponding side-wall can be observed in both cases.     

Tetra-detector size exclusion chromatography characterization of molecular and solution properties of soluble microbial polysaccharides from an anaerobic membrane bioreactor

Characterization of the molecular properties of soluble microbial products (SMP) is critical for understanding the membrane filtration and fouling mechanisms in anaerobic and aerobic membrane bioreactors (AnMBR & MBR). In this study, the distributions of the absolute molecular weight and intrinsic viscosity of SMP polysaccharides from an AnMBR were effectively determined by a high performance size exclusion chromatography (HPSEC) that was coupled with the refractive index (RI), diode array UV (DAUV), right and low angle light scattering (LS), and viscometer (Vis) detectors. Based on the tetra-detector HPSEC determined absolute molecular weights and intrinsic viscosity, a universal calibration relationship for the SMP polysaccharides was developed and the molecular conformations, average molecular weights, and hydrodynamic sizes of the SMP polysaccharides were also explored. Two factors which can be derived from the tetra-detector HPSEC analysis were proposed for the characterization of the viscous and osmotic pressure properties of the SMP polysaccharides. In addition, it was also extrapolated how to analyze the resistance characteristics of the concentration polarization layers formed in membrane filtration based on the molecular properties determined by the tetra-detector HPSEC analysis.

Open image in new window

     

A spatial gradient in the potential reproductive output of the sea mussel <Emphasis Type="Italic">Mytilus californianus</Emphasis>

Spatial variation in reproductive output from different populations within a region could have important consequences for recruitment, and cascading effects on populations and communities of marine species, but is rarely examined over meso-scales (i.e., tens to hundreds of kilometers). In this study, reproduction in the dominant mid-intertidal mussel, Mytilus californianus, was examined from sites spanning Point Conception, California over a 6-month period (March–August 2000). There was a dramatic geographic pattern in the relationship between size and potential reproductive output that was qualitatively similar across all 6 months sampled. Increases in allocation to reproductive tissue with increasing body size occurred at all sites, but the slope nearly doubled at sites south of Point Conception compared to northern sites. The spatial variation in size-specific reproductive output, coupled with additional spatial gradients in mussel density and size distributions, combined to increase total reproductive output by over eightfold at southern relative to northern sites. This study highlights the need to explicitly examine spatial patterns of reproductive output at these meso-scales, in order to better understand connectivity and source–sink dynamics in marine systems.     

Recovery of rare and precious metals from urban mines—A review

Urban mining is essential for continued natural resource extraction. The recovery of rare and precious metals (RPMs) from urban mines has attracted increasing attention from both academic and industrial sectors, because of the broad application and high price of RPMs, and their low content in natural ores. This study summarizes the distribution characteristics of various RPMs in urban mines, and the advantages and shortcomings of various technologies for RPM recovery from urban mines, including both conventional (pyrometallurgical, hydrometallurgical, and biometallurgical processing), and emerging (electrochemical, supercritical fluid, mechanochemical, and ionic liquids processing) technologies. Mechanical/physical technologies are commonly employed to separate RPMs from nonmetallic components in a pre-treatment process. A pyrometallurgical process is often used for RPM recovery, although the expensive equipment required has limited its use in small and medium-sized enterprises. Hydrometallurgical processing is effective and easy to operate, with high selectivity of target metals and high recovery efficiency of RPMs, compared to pyrometallurgy. Biometallurgy, though, has shown the most promise for leaching RPMs from urban mines, because of its low cost and environmental friendliness. Newly developed technologies—electrochemical, supercritical fluid, ionic liquid, and mechanochemical—have offered new choices and achieved some success in laboratory experiments, especially as efficient and environmentally friendly methods of recycling RPMs. With continuing advances in science and technology, more technologies will no doubt be developed in this field, and be able to contribute to the sustainability of RPM mining.

Open image in new window

     

Network structure and parasite transmission in a group living lizard,the gidgee skink, <Emphasis Type="Italic">Egernia stokesii</Emphasis>

Gidgee skinks (Egernia stokesii) form large social aggregations in rocky outcrops across the Flinders Ranges in South Australia. Group members share refuges (rock crevices), which may promote parasite transmission. We measured connectivity of individuals in networks constructed from patterns of common crevice use and observed patterns of parasitism by three blood parasites (Hemolivia, Schellackia and Plasmodium) and an ectoparasitic tick (Amblyomma vikirri). Data came from a 1-year mark-recapture study of four populations. Transmission networks were constructed to represent possible transmission pathways among lizards. Two lizards that used the same refuge within an estimated transmission period were considered connected in the transmission network. An edge was placed between them, directed towards the individual that occupied the crevice last. Social networks, a sub-set of same-day only associations, were small and highly fragmented compared with transmission networks, suggesting that non-synchronous crevice use leads to more transmission opportunities than direct social association. In transmission networks, lizards infested by ticks were connected to more other tick-infested lizards than uninfected lizards. Lizards infected by ticks and carrying multiple blood parasite infections were in more connected positions in the network than lizards without ticks or with one or no blood parasites. Our findings suggest higher levels of network connectivity may increase the risk of becoming infected or that parasites influence lizard behaviour and consequently their position in the network. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. This contribution is part of the special issue “Social Networks: new perspectives” (Guest Editors: J. Krause, D. Lusseau and R. James).     

Temporal patterns of larval settlement and survivorship of two broadcast-spawning acroporid corals

Acroporid corals are the main reef-building corals that provide three-dimensional habitats for other reef organisms, but are decreasing on many reefs worldwide due to natural and anthropogenic disturbances. In this study, temporal patterns of larval settlement and survivorship of two broadcast-spawning acroporid coral species, Acropora muricata and A. valida, were examined through laboratory rearing experiments to better understand the potential for larval dispersal of this important coral group. Many larvae were attached (but not metamorphosed) to settlement tiles on the first examination 3–4 days after spawning (AS). The first permanent larval settlement (i.e. metamorphosed and permanently settled juvenile polyps) occurred at 5–6 days AS, and most larval settlement (85–97% of total) occurred within 9–10 days AS. Larval survivorship decreased substantially to around 50% by the first week of the experiment and to approximately 10% by the second to third week. The rates of larval attachment, settlement, and the initial drop in survivorship of larvae suggest that effective dispersal of some acroporid species may largely be completed within the first few weeks AS.     

Ethylenediamine-modified activated carbon for aqueous lead adsorption

This study is to develop a carbon-based adsorbent containing multiple functional ligands for effective removal of lead ions from aqueous media. Activated carbon was oxidized by nitric acid, followed by chlorination with thionyl chloride and reaction with ethylenediamine. Modified activated carbon (MAC) was characterized using scanning electron microscopy in conjunction of energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FT-IR), and potentiometric titration. Surface characterizations confirmed that carboxyl, amine, and chlorine functional groups were effectively introduced onto the carbon surface by the treatments. The modifications lowered the pH at the point of zero charge (pH_pzc) from 9.6 to 2.55 and resulted in more negatively charged surfaces. Adsorptive experiments showed that aqueous Pb removal by MAC was faster, with a 62% higher capacity than the original activated carbon (60.2 vs. 37.2 mg g⁻¹).     

A two-dimensional inviscid model of the gravity-current head by Lagrangian block simulation

A two-dimensional inviscid model of the gravity-current head produced by the release of a relatively small volume of dense fluid from behind a tall lock gate is constructed by Lagrangian block simulation. Three numerical experiments are conducted for the lock’s height-to-length aspect ratios H/L _o  = 8, 4 and 2. The front speeds obtained by the simulations agree with the laboratory observation for a similar range of aspect ratios. The floor velocity in the wake behind these heads is found to be greater than their front speed. The high floor velocity is caused by the impingement of the coherent wake vortex on the floor. It is a condition that permits these gravity-current heads to maintain their structural integrity so that the fine sediments can travel with the head over long distances on the ocean floor. The structural coherence of the current head depends on the lock aspect ratio. The gravity-current head produced by the release from the lock with the highest aspect ratio of H/L _o  = 8 is most coherent and relatively has the greatest floor velocity and the least trailing current behind the head.