Estimating Fugitive Emissions of Volatile Compounds from Equipment Leaks

This paper is directed to those concerned with estimating releases to the air of volatile compounds from equipment component leaks. We compared emission rates for equipment component leaks using EPA’s Average Emission Factor Method, Leak/No-Leak Emission Factor Method, and Stratified Emission Factor Method. The latter two methods may be used if there are concentration measurements about the components. An organic vapor analyzer was applied with the appropriate response factor to measure the concentrations around each equipment component using EPA Method 21. We analyzed this data to determine mass emission rates. Results show that the Average Emission Factor Method substantially overstates the emission rates calculated using these other two methods. We conclude that use of Method 21 concentration measurements with the Leak/No Leak or Stratified Emission Factor Method may increase the accuracy and reduce significantly the estimated releases to the air of volatile compounds from equipment component leaks for many facilities.     

‘A system that works for the sea’? Exploring Stakeholder Engagement in Marine Spatial Planning

This paper aims to contribute to the current debate on Marine Spatial Planning (MSP) by exploring the issue of stakeholder engagement. MSP is an emergent policy field that is subject to an increasing body of research, yet the role, scope and nature of participatory engagement within the process remains a neglected topic. This paper briefly reviews the nature of the ‘marine problem’, to which MSP is seen to be the response and describes the emergence of MSP policy in the UK with specific emphasis on participatory aspects. Drawing on the experience of terrestrial planning it discusses the potential benefits of stakeholder engagement in MSP and highlights some of the key issues that need to be taken into account when shaping stakeholder input into the process. It then goes on to describe the findings from a series of interviews with key stakeholders in the Irish Sea Region, which suggest that we need to develop a more critical and deeper understanding of how various interests frame the ‘marine problem’, and how they see their role in shaping the form of the MSP process. This highlights the importance of encouraging stakeholder involvement in MSP, the need to develop a shared vision of a ‘sea interest’. Priorities are then set for research to support this important policy agenda.     

Limitations for brine acidification due to SO2 co-injection in geologic carbon sequestration

Co-injection of sulfur dioxide during geologic carbon sequestration can cause enhanced brine acidification. The magnitude and timescale of this acidification will depend, in part, on the reactions that control acid production and on the extent and rate of SO₂ dissolution from the injected CO₂ phase. Here, brine pH changes were predicted for three possible SO₂ reactions: hydrolysis, oxidation, or disproportionation. Also, three different model scenarios were considered, including models that account for diffusion-limited release of SO₂ from the CO₂ phase. In order to predict the most extreme acidification potential, mineral buffering reactions were not modeled. Predictions were compared to the case of CO₂ alone which would cause a brine pH of 4.6 under typical pressure, temperature, and alkalinity conditions in an injection formation. In the unrealistic model scenario of SO₂ phase equilibrium between the CO₂ and brine phases, co-injection of 1% SO₂ is predicted to lead to a pH close to 1 with SO₂ oxidation or disproportionation, and close to 2 with SO₂ hydrolysis. For a scenario in which SO₂ dissolution is diffusion-limited and SO₂ is uniformly distributed in a slowly advecting brine phase, SO₂ oxidation would lead to pH values near 2.5 but not until almost 400 years after injection. In this scenario, SO₂ hydrolysis would lead to pH values only slightly less than those due to CO₂ alone. When SO₂ transport is limited by diffusion in both phases, enhanced brine acidification occurs in a zone extending only 5 m proximal to the CO₂ plume, and the effect is even less if the only possible reaction is SO₂ hydrolysis. In conclusion, the extent to which co-injected SO₂ can impact brine acidity is limited by diffusion-limited dissolution from the CO₂ phase, and may also be limited by the availability of oxidants to produce sulfuric acid.     

Assessing the impact of VOC-contaminated groundwater on surface water at the city scale

This study is believed to be one of the first to assess the impact of urban VOC-(volatile organic compound) contaminated groundwater on river-water quality at the city scale. A network of riverbed piezometers was used to study the 7.4-km urbanised reach of the River Tame that flows across the groundwater-effluent unconfined Triassic sandstone aquifer underlying the city of Birmingham (UK). Aquifer groundwater contained significant chlorinated VOC contamination due to the city's industrial heritage. Chlorinated VOC-contaminated baseflow was widespread along the reach with trichloroethene (TCE) dominant. VOC concentrations in riverbed piezometers were in the range 0.1-100 microg/l with typical regulatory limits occasionally exceeded by an order of magnitude. Although anaerobic biodegradation products such as cis-dichloroethene were widespread, they were unlikely to have formed in the generally aerobic riverbed. The lack of anaerobic conditions was ascribed to insufficient accumulation of low-permeability, organic-carbon rich riverbed sediments in this medium-high energy river. Assumptions a priori that natural attenuation of chlorinated VOCs will occur via reductive dechlorination in urban riverbeds are likely in error, particularly where deposits of medium-high permeability exist transmitting much of the baseflow. Surface-water quality impacts were nevertheless still low with in-river TCE increasing by just 2 microg/l over the 7.4-km reach. Agreement of baseflow contaminant flux estimates based on five flow-concentration product methods was achieved to within an order of magnitude with 22-200 kg/yr of TCE estimated to discharge to the 7.4-km reach (equivalent to 0.8-7.5 mg/d/m2 of riverbed). Such uncertainty was not regarded as unreasonable when the large measurement scale and geological and chemical heterogeneities are considered. Improved flux estimation methods and greater monitoring densities are nevertheless warranted. Considering Birmingham's long industrial history and known incidence of VOC-contaminated groundwater, the city-scale impact of VOC-contaminated groundwater upon surface-water quality was judged to be relatively modest.     

Possible maternal offloading of metals in the plasma,uterine and capsule fluid of pregnant ragged-tooth sharks (Carcharias taurus) on the east coast of South Africa

Environmental Science and Pollution Research - We studied the possible metal offloading onto the progeny of three pregnant female ragged-tooth sharks (Carcharias taurus) (C. taurus). The presences...     

A free,open-source tool for identifying urban agglomerations using polygon data

This paper describes the function of a software tool for identifying urban agglomerations in low-information settings using free, open data. The framework outlined here is designed to work using polygon data. This paper describes the advantages and disadvantages of using polygon-based geographies in regional analysis, discusses the practical and ethical challenges of distinguishing urban from rural regions, and discusses the relevance of this tool in the analysis of global city regions. It also describes the logical structure of our polygon-based software tool and directs interested readers to the source code. We finally examine the agglomeration results for Sri Lanka and compare them with published urbanization figures. We conclude that there are very large disparities between our model’s outputs and the urbanization estimates from the United Nations and that our tools can be used as a less discretionary way to identify actual levels of urbanization. We hope that other analysts will continue to refine the progression toward a less discretionary model of identifying urban regions.     

Estimating chemical biotransformation rates from food web concentrations

Biotransformation is widely recognized as the most important and most uncertain determinant of bioaccumulation. A step-wise method for estimating organism-specific biotransformation half-lives from field observations and using established food web modeling is developed. As a proof of concept, the method is applied to the case of nine polycyclic aromatic hydrocarbons (PAHs) in a well-studied food web in Bohai Bay, China. The estimated half-lives are in good agreement with the existing literature. The proposed biotransformation estimation method, through data mining, for sufficiently defined ecosystems, may greatly reduce the necessary animal testing involved in chemical assessments by providing useful guidance to experimentalists and regulators.     

Linking empirical estimates of body burden of environmental chemicals and wellness using NHANES data

Biomonitoring of industrial chemicals in human tissues and fluids has shown that all people carry a “body burden” of synthetic chemicals. Although measurement of an environmental chemical in a person's tissues/fluids is an indication of exposure, it does not necessarily mean the exposure concentration is sufficient to cause an adverse effect. Since humans are exposed to multiple chemicals, there may be a combination effect (e.g., additive, synergistic) associated with low-level exposures to multiple classes of contaminants, which may impact a variety of organ systems. The objective of this research is to link measures of body burden of environmental chemicals and a “holistic” measure of wellness. The approach is demonstrated using biomonitoring data from the National Health and Nutrition Examination Surveys (NHANES). Forty-two chemicals were selected for analysis based on their detection levels. Six biological pathway-specific indices were evaluated using groups of chemicals associated with each pathway. Five of the six pathways were negatively associated with wellness. Three non-zero interaction terms were detected which may provide empirical evidence of crosstalk across pathways. The approach identified five of the 42 chemicals from a variety of classes (metals, pesticides, furans, polycyclic aromatic hydrocarbons) as accounting for 71% of the weight linking body burden to wellness. Significant interactions were detected indicating the effect of smoking is exacerbated by body burden of environmental chemicals. Use of a holistic index on both sides of the exposure-health equation is a novel and promising empirical “systems biology” approach to risk evaluation of complex environmental exposures.     

Aerobic degradation of diuron by aquatic microorganisms

Abstract

Degradation of diuron [3‐(3,4‐dichlorophenyl)‐l,1‐dimethyl‐urea] by microorganisms obtained from pond water and sediment was determined under aerobic conditions. Enrichment procedures were used to isolate cultures capable of degrading the herbicide. Several mixed fungal/bacterial and mixed bacterial cultures were isolated that could degrade diuron. The mixed cultures degraded 67–99% of the added diuron forming from six to seven products which were separated via TLC. The major degradation product detected in most culture extracts was 3,4‐dichloroaniline. Other identified products formed were 3‐(3,4‐dichlorophenyl)‐1‐methylurea and 3‐(3,4‐dichlorophenyl)urea.