Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

Granulation of anammox microorganisms for autotrophic nitrogen removal from wastewater

Excessive discharge of nutrients in waters induces pollution such as such as eutrophication. Conventional methods to treat waters are expensive. Alternatively, anaerobic ammonium oxidation, termed “anammox”, has been recently developped with benefits such as low sludge production, 50% less aeration demand, no external carbon supply, 60% less power consumption, and 90% reduction of greenhouse gas emissions. However, anammox is limited by long start-up periods due to the low growth rate of anammox bacteria. This issue can be solved by complete retention of biomass by reactor modification or by formation of anammox granules. This article reviews the mechanisms of anammox granulation and biogranulation models. We present factors involved in the granulation processes such as hydrodynamic shear force, extracellular polymeric substances, hydraulic retention time, seed sludge and bioreactors. We also discuss the interaction of proteins and polysaccharides in anammox granules.     

Bryophyte responses to microclimatic edge effects across riparian buffers.

Although riparian buffers are an important aspect of forest management in the boreal forest of Canada, little is known about the habitat conditions within buffers, due in part to complex edge effects in response to both the upland clearcut and the stream. We investigated microclimatic conditions and bryophyte growth and vitality in seven locations between the stream edge and 60 m into the upland undisturbed conifer forests and at the clearcut sites with riparian buffer 30 km northwest of Thunder Bay, Ontario, Canada. We hypothesized that the growth and vitality of a pleurocarpous moss, Hylocomium splendens, and an acrocarpous moss, Polytrichum commune, would be directly related to the microclimatic gradients detected. We further hypothesized that sensitivity of the bryophytes to environmental factors will vary depending on their life form type, i.e., pleurocarpous moss will respond differently than the acrocarpous moss. Both bryophyte species were transplanted in pots and placed at 10-m intervals along 60-m transects perpendicular to the stream across the buffer and undisturbed sites. Bryophyte growth, cover, and vitality, as well as microclimatic parameters and plant cover, were measured over the summer in 2003. The riparian buffers were simultaneously affected by microclimatic gradients extending from both the clearcut edge and the riparian-upland ecotonal edge. Both bryophyte species responded to changes in the microclimatic conditions. However, vapor pressure deficit (VPD) was the most important factor influencing the growth of H. splendens, whereas for P. commune growth soil moisture was most important. Our study confirms earlier findings that interior forest bryophytes such as H. splendens can be used as indicators to monitor edge effects and biodiversity recovery following forest harvesting. We demonstrate that growth and vitality of these bryophytes reflect the prevailing near-ground microclimatic conditions at the forest edges. Abundance estimates of such bryophytes can be used to determine the depth of edge effects across both ecotonal edges (e.g., riparian-upland forest edge) and anthropogenically created edges (e.g., clearcut edge). Forest management practices must consider depth of edge in determining the appropriate width of riparian buffers that would be necessary to sustain biodiversity and associated values at the land/water interface.     

Freshwater lakes--a potential source for aquaculture activities--a model study on Perumal Lake, Cuddalore, Tamil Nadu

The freshwater Perumal lake located at Cuddalore was assessed for its suitability and potential for aquaculture practices. Various hydrobiological parameters determined reveals that the various physicochemical characteristics are with in normal range of values. The DO level, BOD and COD values determined in the lake revealed the consequences of community activities and pollution possibilities. The primary productivity data revealed maximum productivity during March which infer that the lake is unaffected by anthropogenic disturbance and community contamination. The bacterial count remained higher during the monsoon periods, which characterize profuse rainfall and storm water discharge into the lake. The microfauna includes zooplankter such as cladocerans, copepods, rotifers and ostracods. Benthos include carps, catfishes, mullets and prawns. The above study revealed that the various parameters in the lake conform to the levels suited for freshwater fish culture and represents a resource for scientific management.     

CADMIUM ACCUMULATION AND TOXICITY IN SUBMERGED PLANT HYDRILLA VERTICILLATA (l.f.) ROYLE

Cadmium accumulation and its toxicity in relation tochlorophyll, protein, cysteine contents and in vivo nitrate reductaseactivity were studied under controlled conditions in Hydrillaverticillata, a submerged commonly occurring macrophyte. Plants weresubjected to six different concentrations of Cd ranging from 1.0 to 25.0 µM for 24, 48, 72 and 168 h. Tissue Cd concentration was maximum (13.71 µmoles/g dw) at 25 µM background concentration. At this concentration, a decrease of approximately 79 and 72% was found in chlorophyll and protein content. In vivo nitrate reductase activity was stimulated at 1.0 µM; however, the activity gradually declined beyond this concentration. Exposure to various cadmium concentrations resulted in an increase in cysteine content of the plant.     

Methods for constructing and balancing ecosystem flux charts: new techniques and software

We describe a general computer program which employs novel techniques to analyze carbon (energy) and nutrient flows in complex food webs. The program uses estimates of metabolic/physiological parameters and ecosystem fluxes to simultaneously calculate the most likely balanced flux charts for carbon and a nutrient. We give an example of how the model can explore the theoretical issues involved with nutrient limitation and recycling.     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

Combining sap flow and eddy covariance approaches to derive stomatal and non-stomatal O3 fluxes in a forest stand

Stomatal O₃ fluxes to a mixed beech/spruce stand (Fagus sylvatica/Picea abies) in Central Europe were determined using two different approaches. The sap flow technique yielded the tree-level transpiration, whereas the eddy covariance method provided the stand-level evapotranspiration. Both data were then converted into stomatal ozone fluxes, exemplifying this novel concept for July 2007. Sap flow-based stomatal O₃ flux was 33% of the total O₃ flux, whereas derivation from evapotranspiration rates in combination with the Penman-Monteith algorithm amounted to 47%. In addition to this proportional difference, the sap flow-based assessment yielded lower levels of stomatal O₃ flux and reflected stomatal regulation rather than O₃ exposure, paralleling the daily courses of canopy conductance for water vapor and eddy covariance-based total stand-level O₃ flux. The demonstrated combination of sap flow and eddy covariance approaches supports the development of O₃ risk assessment in forests from O₃ exposure towards flux-based concepts.     

Quantifying trace gas emissions from composite landscapes: A mass-budget approach with aircraft measurements

Quantifying trace gas emissions and the influence of surface exchange processes on the atmosphere is a necessary step towards the control of global greenhouse gas emissions and reliability of air quality models. This paper proposes a procedure based on the mass balance method and implemented on highly resolved aircraft data. It allows one to estimate surface exchanges on areas of several km² and heterogeneous features exploiting the characteristics of convective boundary layer during steady state conditions that permit the estimation of emission/absorption terms as functions of advective fluxes only. A nonparametric approach is adopted and the fluxes on the surface of a virtual box surrounding the area of interest are reconstructed on the basis of scalar densities and wind vectors using Shepard functions. Two different techniques are also proposed to face lack of data on the top surface of the box. The method has been applied to experimental data coming from measurement campaigns on two different sites. It provides realistic estimates of the CO₂ emission/absorption in the considered areas that are in good agreement with CO₂ fluxes evaluated by Airborne Eddy Covariance and confirm the suitability of the proposed approach for the assessment of turbulent exchange of trace gases by composite landscapes. Uncertainties on the estimated emissions due to both propagation of the experimental error and interpolation have been quantified by bootstrap analysis as 6%.