A preliminary study on the use of (10)Be in forensic radioecology of nuclear explosion sites

Cosmogenic (10)Be, known for use in dating studies, unexpectedly is also produced in nuclear explosions with an atom yield almost comparable to (e.g.) (137)Cs. There are major production routes via (13)C(n, alpha)(10)Be, from carbon dioxide in the air and the organic explosives, possibly from other bomb components and to a minor extent from the direct fission reaction. Although the detailed bomb components are speculative, carbon was certainly present in the explosives and an order of magnitude calculation is possible. The (n, alpha) cross-section was determined by irradiating graphite in a nuclear reactor, and the resulting (10)Be estimated by Accelerator Mass Spectrometry (AMS) giving a cross-section of 34.5+/-0.7mb (6-9.3MeV), within error of previous work. (10)Be should have applications in forensic radioecology. Historical environmental samples from Hiroshima, and Semipalatinsk (Kazakhstan) showed two to threefold (10)Be excesses compared with the background cosmogenic levels. A sample from Lake Chagan (a Soviet nuclear cratering experiment) contained more (10)Be than previously reported soils. (10)Be may be useful for measuring the fast neutron dose near the Hiroshima bomb hypocenter at neutron energies double those previously available.     

Distribution of total mercury, methyl mercury and selenium in pod of killer whales (Orcinus Orca) stranded in the northern area of Japan: comparison of mature females with calves

Total mercury (T-Hg) and selenium (Se) concentrations in liver, kidney and muscle from a pod of killer whales including five mature females and three calves stranded in the northern area of Japan were analyzed. In the mature female, contamination level of T-Hg in the liver sample (62.2+/-21.9 microg/wet g) was markedly higher than that in kidney sample and muscle sample. The molar ratio of T-Hg to Se in the liver sample was approximately 1, and those in the kidney and muscle samples were markedly lower than 1. These results suggest that the formation of HgSe compound increases the hepatic accumulation of mercury (Hg). In contrast, contamination level of T-Hg in the calf organs was much lower than that in the mature female organs. These results suggest that the transfer of Hg from the mother to the fetus via placenta and/or to calf via milk is trace.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Transportation of organic matter to the sea floor by carrion falls of the giant jellyfish <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> in the Sea of Japan

The fate of the giant jellyfish Nemopilema nomurai after death was examined in the southwest Sea of Japan. The density of dead jellyfish was greater than that of live animals. The dead animals are heavier than the Japan Sea Proper Water which occurs deeper than 200 m, suggesting that dead jellyfish sink to the sea floor. The sea floor survey, conducted with a towed video tape recorder (VTR) monitoring system between mid September and mid October, observed a total of 138 jellyfish during 28 of 29 operations. The density of carrion ranged between 0.2 and 5.1 individuals/1,000 m² (mean ± SE = 1.1 ± 0.2). Ophiuroids occurred abundantly at 23 jellyfish carcasses and a sea anemone was observed attached to five carcasses. The VTR surveys confirmed that carrion sinks to the sea floor not only during the winter, the normal end of life for medusae, but also during the fall. A trap survey baited with medusae was also employed, and four different species were sampled with the traps: the snow crab (Chionoecetes opilio), a shrimp (Pandalopsis japonica), the ivory shell (Buccinum striatissimum) and an ophiuroid (Ophiura sarsii). Much of the trap bait remained (49–68% weight-mean = 60.3%) during the 23 h soak-time, and the reduction in weight was greater than that observed by bacterial decomposition, suggesting benthic animals consume dead organisms. The present study indicates that dead N. nomurai sink to the sea floor continuously and were subsequently consumed by benthic scavengers.     

Safety studies on hydraulic proportional valves with electrical position feedback.

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Several failures were introduced into the feedback loop, especially into the 2 solenoids and the inductive position transducer. The behaviour of the valve for square and ramp reference signals was recorded and systematically analysed. It was shown that failures could be detected by monitoring the residual signal from the equipment under control or the residual signal from the sensor. It was possible to achieve the safe position within twice the normal response time of the valve by switching off the current of both solenoids. The application of these results for a new generation of safe proportional valves is discussed. The use of the results of these investigations obviates the need for redundancy of the electrical position monitoring arrangement in a safe proportional valve.     

Safety Studies on Hydraulic Proportional Valves With Electrical Position Feedback

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Severalfailures were introduced into the feedback loop, especially into the 2 solenoids and the inductive positiontransducer. The behaviour of the valve for square and ramp reference signals was recorded and systematicallyanalysed. It was shown that failures could be detected by monitoring the residual signal from the equipmentunder control or the residual signal from the sensor. It was possible to achieve the safe position within twice thenormal response time of the valve by switching off the current of both solenoids. The application of these resultsfor a new generation of safe proportional valves is discussed. The use of the results of these investigationsobviates the need for redundancy of the electrical position monitoring arrangement in a safe proportionalvalve.     

Development of active and diffusive sampling methods for determination of 3-methoxybutyl acetate in workplace air

Monitoring of the workplace concentration of 3-methoxybutyl acetate (MBA), which is used in printer's ink and thinner for screen-printing and as an organic solvent to dissolve various resins, is important for health reasons. An active and a diffusive sampling method, using a gas chromatograph equipped with a flame ionization detector, were developed for the determination of MBA in workplace air. For the active sampling method using an activated charcoal tube, the overall desorption efficiency was 101%, the overall recovery was 104%, and the recovery after 8 days of storage in a refrigerator was more than 90%. For the diffusive sampling method using the 3M 3500 organic vapor monitor, the MBA sampling rate was 19.89 cm(3) min(-1). The linear range was from 0.01 to 96.00 microg ml(-1), with a correlation coefficient of 0.999, and the detection limits of the active and diffusive samplers were 0.04 and 0.07 microg sample(-1), respectively. The geometric mean of stationary sampling and personal sampling in a screen-printing factory were 12.61 and 16.52 ppm, respectively, indicating that both methods can be used to measure MBA in workplace air.     

Performance and efficiency of removal of pharmaceutical compounds from hospital wastewater by lab-scale biological treatment system

The fate of pharmaceuticals after discharged from hospital into wastewater was clarified experimentally by using a new lab-scale conventional activated sludge (CAS) treatment reactor. The 43 target compounds belong to nine therapeutic classes (antivirals, antibacterials, anticancer drugs, psychotropics, antihypertensives, analgesic–antipyretics, contrast media, herbal medicines, and phytoestrogens) were selected with inclusion of 16 newly estimated compounds. The efficiency of the present reactor was estimated by comparing the reaction rate constant of the solid-water partition coefficients (log K_d) between liquid and solid samples and half-life during 48-h experiment obtained by using hospital effluents with those obtained by using STP wastewater. The results that no significant difference in removal efficiency was observed between both water samples (P?>?0.05) indicate high reliability of the present lab-scale reactor. The actual rates of removal when hospital effluent was applied varied widely (mean, 59?±?40%) independent of type of the pharmaceuticals. More than 90% of 17 compounds were removed after 8 h of treatment. However, the values for psychotropics (mean, 19?±?26%) and contrast media (mean, 24?±?17%) were generally low, indicating high stability. The log K_d values ranged from 1.3 to 4.8. Notably, clarithromycin, acridine, and glycitein could be removed in both liquid and solid phases. The dominant removal mechanisms were found to be different for individual pharmaceutical. These results suggest the effectiveness of introduction of the lab-scale biological treatment system for development of a new solution for discharge of pharmaceuticals from hospital.

     

Voltammetric response of ferroceneboronic acid to diol and phenolic compounds as possible pollutants

A voltammetric determination of possible organic pollutants such as diol and phenolic compounds in water was studied using ferroceneboronic acid (FBA) as a redox-active marker. A cyclic voltammogram of FBA exhibited a pair of oxidation and reduction peaks at 230 and 170 mV at pH 7.0, respectively, while another pair of redox peaks was observed in the presence of diol or phenolic compounds tested. The results were rationalized based on the formation of boronate esters of FBA with the added compounds. The changes in the redox peak currents were dependent on the concentration of the additives, suggesting a usefulness of FBA in the electrochemical determination of these compounds in water.