Adsorption of cadmium on carbonaceous adsorbents developed from used tire rubber

Carbonaceous adsorbents (CAs) are developed from used tire rubber (UTR) and tested as adsorbents of Cd(2+) in aqueous solution. In the preparation of the CAs, UTR was treated thermally at 400-900 °C for 2 h in N(2) and at 850 °C for 2 h in steam. Concentrated NaOH, HCl, H(2)SO(4), HNO(3) and H(2)O(2) solutions were also used. UTR and H900 (i.e. UTR pyrolyzed at 900 °C) were treated with O(3) at 25 °C for 1 h and with air at 250 °C for 1 and 24 h. CAs were characterized texturally by N(2) adsorption at -196 °C, mercury porosimetry, and density measurements. The surface groups were analyzed by FT-IR spectroscopy. Using the batch method, the adsorption process of Cd(2+) was studied mainly from the kinetic standpoint at various pH values of the adsorptive solution. Significant porosity developments are achieved only when UTR is heat-treated, in particular in steam. However, the variety and concentration of surface groups are low in CAs. This is so even for CAs prepared using oxidizing agents as strong as O(3) and H(2)O(2), which has been associated with a lack of available or accessible surface active sites for oxidation in UTR and H900, respectively. Thermal and thermal-chemical treatments are usually more effective than chemical treatments to increase the adsorption of Cd(2+) in aqueous solution. The adsorption process of Cd(2+) is first fast and then much slower. Adsorption-time data fit better to a pseudo-second order kinetic equation than to a pseudo-first order kinetic equation. The extent to which the adsorption process occurs is strongly dependent on the pH of the Cd(2+) solution, being larger at pH 4.6 or 7.0 according to the adsorbent.     

Traditional agricultural practices enable sustainable remediation of highly polluted soils in Southern Spain for cultivation of food crops

This study relates elemental content of a range of edible crops grown in soils severely polluted by metals and metalloids as affected by traditional smallholder management practices. Five agricultural plots close to a sulfidic waste dump were monitored. Soil analysis demonstrated elevated concentrations of As, Cu, Pb and Zn that were greatly in excess of maximum statutory limits for agricultural soils in the studied region. The main vegetables (lettuce, chard, onion, potatoes) and lemon, together with their associated soils, were measured for elemental content. Extractable soil element concentrations were very low. There were differences in elemental accumulation between crops, but none exceeded statutory concentrations in edible parts. Soil-plant transfer factors were uniformly low for all elements and crops. It is concluded that traditional soil management practices (annual liming and application of animal manures) have created conditions for sustainable long-term safety use, with potential for multiple end-use, of these highly polluted soils.     

Semi-continuous anaerobic co-digestion of orange peel waste and residual glycerol derived from biodiesel manufacturing

The manufacturing of orange juice generates high volumes of orange peel waste which should not be deposited in landfill according to current recommendations. Furthermore, glycerol is a compound co-generated in biodiesel manufacturing, but the volume generated is higher than the current demand for pure glycerol. The anaerobic co-digestion of orange peel waste with residual glycerol could reduce the inhibitory effect of some compounds and provide a correct nutrient balance. Under mesophilic temperature and semi-continuous conditions, a mixture of orange peel waste-residual glycerol of 1:1 (in COD) operated favorably for organic loads up to 2.10 g VS/L. At higher organic loads, the accumulation of volatile fatty acids (VFA) and a decrease in the pH caused process destabilization. The methane yield coefficient was quite constant, with a mean value of 330 ± 51 mL_STP/g VS_added, while the organic loading rate (OLR) reached a mean value of 1.91 ± 0.37 kg VS/m³ d (17.59 ± 2.78 kg mixture/m³ d) and the hydraulic retention time (HRT) varied in a range of 8.5–30.0 d.     

Application of diatom biotic indices in the Guadalquivir River Basin, a Mediterranean basin. Which one is the most appropriated?

The diatom community was studied in 110 sites within the Guadalquivir River catchment area, South Spain, in order to test the applicability of diatom biotic indices developed in other European regions to this site and to provide a useful tool for monitoring water quality in the river basin. We identified 399 taxa and calculated five diatomic indices (Specific Polluosensitivity Index (IPS), Biological Diatom Index, Trophic Diatom Index, Index of the European Economic Community, and Diatom-based Eutrophication Pollution Index (EPI-D)). Since the indices analyzed were highly correlated, their results could be compared. The indices that gave the best results were the EPI-D followed by the IPS, the latter being the most widely used index in Iberian catchments. Nevertheless, the EPI-D presented certain advantages: (1) this index correlated the best with the water chemistry in the catchment area; (2) EPI-D is not sensitive to the presence of taxa belonging to the Achnanthidium minutissimum complex frequently present in the Guadalquivir basin. Nevertheless, EPI-D retains its effectiveness and thus constitutes an easier index for application from a taxonomical standpoint. We estimated the general water quality of the entire basin on the basis of EPI-D. According to these results, 55% of the sites had either high or good water quality. The species that better characterized each water quality category in the study area were: A. minutissimum (high and good), Amphora pediculus (moderate), Nitzschia frustulum (poor), and Nitzschia capitellata (bad).     

Influence of avian reproduction ecotoxicological endpoints in the assessment of plant protection products

The aim of this paper is to examine the statistical relevance of bird species on the endpoints of avian long–term toxicity studies (eggs laid, eggs set, eggs hatching, embryo survivor, 14-day old survivors and eggshell thickness). Data from 561 animals of three different species (Colinus virginianus, Anas platyrynchos and Coturnix coturnix japonica) tested with five different pesticides were analyzed in this study. The substances considered were: Thiamethoxam (EZ-3-(2-chloro-1,3-thiazol-5-ylmethyl)-5-methyl-1,3,5-oxadiazinan-4-ylidene(nitro)amine), Thiacloprid ((Z)-3-(6-chloro-3-pyridylmethyl)-1,3-thiazolidin-2-ylidenecyanamide), Acetamiprid ((E)?N ¹-[(6-chloro-3-pyridyl)methyl]-N ²-cyano-N ¹-methylacetamidine), Phosmet (O,O-dimethyl S-phthalimidomethyl phosphorodithioate) and Dicofol (2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol). Several general lineal mixed models were conducted to evaluate the factors affecting variables used in long-term reproductive toxicity tests. Test significance was p < 0.01 in all models tested. Model R² value was high (0.80) for all variables except for eggs laid (R² = 0.42) for the three species studied. Tukey studentized range test showed significant differences among species and pesticides. For pre-hatching period the differences were significant for eggs laid and eggs set among species. C. japonica showed statistical differences for egg hatching. With respect to embryo survivor and 14 days old survival, significant different were found for C.virginianus and A. platyrynchos, respectively. These results indicate that the selected species have an influence in the endpoints to be used for risk assessment.     

Atmospheric polycyclic aromatic hydrocarbons in remote European and Atlantic sites located above the boundary mixing layer

Background, aim and scope  

Ambient air concentrations of polycyclic aromatic hydrocarbons (PAH) were determined at five elevated mountain sites on the European continent and the Atlantic Ocean. All sites can be considered remote background areas since they are situated above the timberline and they lack local emission sources of these compounds.     

Towards system for the management of safety on board artisanal fishing vessels: Proposal for check-lists and their application

The safety management systems applied at the international level in merchant vessels do not have their equivalent in the vessels dedicated to fishing, and much less to the most numerous sub-sector, artisanal fishing. The article presented here is based on the results of a research project conducted to assess the degree of safety existing in the artisanal fishing fleet of Andalusia, in SW Spain. It offers a set of proposals aimed at improving safety by the production and application of check-lists, as stated in the initial objectives of the project. We therefore present a series of specific working instruments for the detection and correction of the various risks that are frequently faced in the artisanal fisheries sector; these instruments have, in fact, already been applied by the Regional Authorities in the form of risk assessment models, which we present here.     

Waste tyre pyrolysis: Modelling of a moving bed reactor

This paper describes the development of a new model for waste tyre pyrolysis in a moving bed reactor. This model comprises three different sub-models: a kinetic sub-model that predicts solid conversion in terms of reaction time and temperature, a heat transfer sub-model that calculates the temperature profile inside the particle and the energy flux from the surroundings to the tyre particles and, finally, a hydrodynamic model that predicts the solid flow pattern inside the reactor. These three sub-models have been integrated in order to develop a comprehensive reactor model. Experimental results were obtained in a continuous moving bed reactor and used to validate model predictions, with good approximation achieved between the experimental and simulated results. In addition, a parametric study of the model was carried out, which showed that tyre particle heating is clearly faster than average particle residence time inside the reactor. Therefore, this fast particle heating together with fast reaction kinetics enables total solid conversion to be achieved in this system in accordance with the predictive model.