Influence of water allocation and freshwater inflow on oyster production: a hydrodynamic-oyster population model for Galveston Bay,Texas, USA

A hydrodynamic-oyster population model was developed to assess the effect of changes in freshwater inflow on oyster populations in Galveston Bay, Texas, USA. The population model includes the effects of environmental conditions, predators, and the oyster parasite, Perkinsus marinus, on oyster populations. The hydrodynamic model includes the effects of wind stress, river runoff, tides, and oceanic exchange on the circulation of the bay. Simulations were run for low, mean, and high freshwater inflow conditions under the present (1993) hydrology and predicted hydrologies for 2024 and 2049 that include both changes in total freshwater inflow and diversions of freshwater from one primary drainage basin to another.Freshwater diversion to supply the Houston metropolitan area is predicted to negatively impact oyster production in Galveston Bay. Fecundity and larval survivorship both decline. Mortality from Perkinsus marinus increases, but to a lesser extent. A larger negative impact in 2049 relative to 2024 originates from the larger drop in fecundity under that hydrology. Changes in recruitment and mortality, resulting in lowered oyster abundance, occur because the bay volume available for mixing freshwater input from the San Jacinto and Buffalo Bayou drainage basins that drain metropolitan Houston is small in comparison to the volume of Trinity Bay that presently receives the bulk of the bay's freshwater inflow. A smaller volume for mixing results in salinities that decline more rapidly and to a greater extent under conditions of high freshwater discharge.Thus, the decline in oyster abundance results from a disequilibrium between geography and salinity brought about by freshwater diversion. Although the bay hydrology shifts, available hard substrate does not. The simulations stress the fact that it is not just the well-appreciated reduction in freshwater inflow that can result in decreased oyster production. Changing the location of freshwater inflow can also significantly impact the bay environment, even if the total amount of freshwater inflow does not change.     

Commercialization of Dredged-Material Decontamination Technologies

This article describe a unique federal project aimed at the commercialization of different technologies for the decontamination of dredged material. The project is organized so that commercialization is achieved in a seamless way, starting with validation at the bench- and pilot-scale levels, and ending with the actual construction of operational facilities. This is the first integrated sediment decontamination program in which a step-wise bench-scale validation process of innovative/emerging technologies will scale-up to a production-scale facility capable of processing up to 375,000 m³ of dredged material per year. The need to develop public-private partnerships for the facility construction is emphasized as a way of obtaining adequate finding for capital and operating costs during the startup time of the commercialization process. It is expected that the end result of the project work will be the creation of economically-viable, self-sustaining decontamination technology companies.     

Simulating Spatial and Temporal Context of Forest Management Using Hypothetical Landscapes

/ Spatially explicit models that combine remote sensing with geographic information systems (GIS) offer great promise to land managers because they consider the arrangement of landscape elements in time and space. Their visual and geographic nature facilitate the comparison of alternative landscape designs. Among various activities associated with forest management, none cause greater concern than the impacts of timber harvesting on the composition, structure, and function of landscape ecosystems. A timber harvest allocation model (HARVEST) was used to simulate different intensities of timber harvest on 23,592-ha hypothetical landscapes with varying sizes of timber production areas and different initial stand age distributions. Our objectives were to: (1) determine the relative effects of the size of timber production areas, harvest intensity, method used to extract timber, and past timber harvest activity on the production of forest interior and edge; and (2) evaluate how past management (in the form of different initial stand age distributions) constrains future timber production options. Our simulations indicated that the total area of forest interior and the amount of forest edge were primarily influenced by the intensity of timber harvest and the size of openings created by harvest. The size of the largest block of interior forest was influenced most by the size of timber harvests, but the intensity of harvest was also significant, and the size of nontimber production areas was important when harvests were numerous and widely dispersed within timber management areas, as is often the case in managed forests. Stand age-class distributions produced by past harvest activity limited the amount of timber production primarily when group selection was used, but also limited clear-cutting when recent harvest levels were high.KEY WORDS: Simulation modeling; Timber harvest; Historical context; Spatial context; Landscape pattern; Forest interior; Forest edge     

Aluminum recovery from electronic scrap by High-Force® eddy-current separators

The amount of electronic scrap which contains a substantial portion of non-ferrous metals, primarily copper and aluminum, has been growing. The present study is directed toward aluminum recovery by a newly developed eddy current separator. The investigation on shredded personal computer and printed circuit board scrap demonstrates that the High-Force® eddy-current separator will be applicable for this purpose. It has been shown that, by a single pass of the materials on the High-Force® eddy-current separator, an aluminum concentrate out of personal computer scrap can be obtained with a purity of 85%, while maintaining a recovery in excess of 90%, with the feed rate being up to 0.3 kg/min.     

Fuel substitution and efficient woodstoves: Are they the answers to the fuelwood supply problem in Northern Nigeria?

Fuelwood consumption in Northern Nigeria exceeds the sustainable production, and the deficit is currently met through long-distance transport from the southern part of the country at an artificially low cost Current household fuel consumption patterns and factors affecting stove choice are discussed. Little has been done to promote more efficient woodstoves in the region, but prospects for stove programs are only good where fuelwood is marketed and the policy environment is conducive. At subsidized official prices for kerosene, liquefied petroleum gas (LPG), and electricity, wood is more expensive on a net usable heat basis, but the high capital cost of stoves for these fuels prevents many households from switching. Moreover, these fuels are often only available at much higher parallel market prices, which result in wood being the less expensive choice. There is little prospect for substitution of coal, solar cookers, or biogas digesters.     

Environmental conservation problems in Kuwait

Summary Environmental problems in Kuwait arise from a number of factors: principally climate, population growth, industrialisation, transport and recreation. The impact of these factors on the environment is discussed in the context of growing awareness of the need for conservation of the remaining facets of Kuwait's heritage. The need to move from discussion of these extant environmental problems to effective action is stressed. Both education and the media have a vital role to play in sharpening awareness of problems and their solutions in the short time-scale left for conservation measures.Eric Caulton is Senior Lecturer and Ecologist in the Department of Biological Sciences, Napier Polytechnic of Edinburgh. In April 1987 he visited Kuwait to undertake an environmental Impact Assessment in the south for the consultants involved in planning Al Khiran new town.David Keddie is an urban planning and economic consultant, and Associate with Roger Tym and Partners. He has worked for both the government and private consultants in Kuwait on various occasions since 1982.     

Characterization of physicochemical properties of beryllium aerosols associated with prevalence of chronic beryllium disease

Little is known about the physicochemical properties of beryllium aerosols associated with increased risk of beryllium sensitization and chronic beryllium disease (CBD). Such information is needed to evaluate whether airborne mass of beryllium is the appropriate metric of exposure or alternatively to provide a scientific basis for using information on particle size, surface area, and chemistry to support an improved exposure limit based on bioavailability through the inhalation and dermal routes of exposure. Thus, we used a suite of analytical techniques to characterize aerodynamically size-fractionated beryllium particles and powders that have been associated in epidemiological studies with higher prevalence of CBD. Aerosol particles were sampled from the ventilation systems of production lines for powders of beryllium metal and beryllium oxide and for ingots of copper-beryllium alloy. End product powders from the metal and oxide production lines were also collected.Particles released during production of beryllium metal were found to be complex, having heterogeneous composition, including reactive species such as fluorine. Powders from beryllium metal production were of high purity with only a minor component of beryllium oxide. Both particles and powders from oxide production were high-purity oxide. Particles released during production of copper-beryllium alloy were heterogeneous, being predominantly copper oxides. Thus, all particles and powders contain at least some beryllium in the form of beryllium oxide.These data justify efforts to thoroughly characterize beryllium aerosol properties when performing exposure assessments. The data also suggest that differences in particle chemical composition, size, number, and surface area may influence bioavailability of beryllium and contribute to risk of CBD. However, a scientific basis does not yet exist to replace mass as the current metric of exposure.     

The Public Policy Aspects of Biological Monitoring: Budget and Land-Use Planning Implications at the County Level

Montgomery County, Maryland faces a growing problem that confronts local governments across the country: the cumulative impacts that population growth and the resulting land-use changes are having on local streams and their accompanying ecosystems. County officials found they needed an affordable tool to serve as a report card for stream health, and began a biomonitoring program in 1994. By 1997 county officials had monitored all 23 watersheds within the county's boundaries, and in 1998 the county published its first Countywide Stream Protection Strategy (CSPS). The County uses the CSPS to prioritize its watershed restoration efforts to those areas most in need of immediate remediation. Six primary programs now support or require the use of information from Montgomery County's biomonitoring program. And, the lessons learned from Montgomery County can help other county and local governments develop similar programs of their own.     

Modeling the Influence of Dynamic Zoning of Forest Harvesting on Ecological Succession in a Northern Hardwoods Landscape

Dynamic zoning (systematic alteration in the spatial and temporal allocation of even-aged forest management practices) has been proposed as a means to change the spatial pattern of timber harvest across a landscape to maximize forest interior habitat while holding timber harvest levels constant. Simulation studies have established that dynamic zoning strategies produce larger tracts of interior, closed canopy forest, thus increasing the value of these landscapes for interior-dependent wildlife. We used the simulation model LANDIS to examine how the implementation of a dynamic zoning strategy would change trajectories of ecological succession in the Great Divide Ranger District of the Chequamegon–Nicolet National Forest in northern Wisconsin over 500 years. The components of dynamic zoning strategies (number of zones in a scenario and the length of the hiatus between successive entries into zones) and their interaction had highly significant impacts on patterns of forest succession. Dynamic zoning scenarios with more zones and shorter hiatus lengths increased the average amount of the forest dominated by early successional aspen (Populus sp.). Dynamic zoning scenarios with two zones produced more late successional mature northern hardwoods than scenarios with four zones. Dynamic zoning scenarios with very short (30 years) or very long (120 years) hiatus lengths resulted in more late successional mature northern hardwoods than scenarios with intermediate hiatus lengths (60 and 90 years). However, none of the dynamic scenarios produced as much late successional mature northern hardwoods as the static alternative. Furthermore, the amounts of all habitat types in all dynamic zoning scenarios fluctuated greatly in time and space relative to static alternatives, which could negatively impact wildlife species that require a stable amount of habitat above some minimum critical threshold. Indeed, implementing dynamic zoning scenarios of different designs would have both positive and negative effects on wildlife species and for other objectives of forest management.