Neutralization/prevention of acid rock drainage using mixtures of alkaline by-products and sulfidic mine wastes

Backfilling of open pit with sulfidic waste rock followed by inundation is a common method for reducing sulfide oxidation after mine closure. This approach can be complemented by mixing the waste rock with alkaline materials from pulp and steel mills to increase the system’s neutralization potential. Leachates from 1 m³ tanks containing sulfide-rich (ca.30 wt %) waste rock formed under dry and water saturated conditions under laboratory conditions were characterized and compared to those formed from mixtures. The waste rock leachate produced an acidic leachate (pH?<?2) with high concentrations of As (65 mg/L), Cu (6 mg/L), and Zn (150 mg/L) after 258 days. The leachate from water-saturated waste rock had lower concentrations of As and Cu (<2 μg/L), Pb and Zn (20 μg/L and 5 mg/L), respectively, and its pH was around 6. Crushed (<6 mm) waste rock mixed with different fractions (1–5 wt %) of green liquid dregs, fly ash, mesa lime, and argon oxygen decarburization (AOD) slag was leached on a small scale for 65 day, and showed near-neutral pH values, except for mixtures of waste rock with AOD slag and fly ash (5 % w/w) which were more basic (pH?>?9). The decrease of elemental concentration in the leachate was most pronounced for Pb and Zn, while Al and S were relatively high. Overall, the results obtained were promising and suggest that alkaline by-products could be useful additives for minimizing ARD formation.     

Alternating copolymers and alternative device geometries for organic photovoltaics

The efficiency of conversion of light to electrical energy with the help of conjugated polymers and molecules is rapidly improving. The optical absorption properties of these materials can be designed, and implemented via molecular engineering. Full coverage of the solar spectrum is thus feasible. Narrow absorption spectra allow construction of tandem solar cells. The poor transport properties of these materials require thin devices, which limits optical absorption. Alternative device geometries for these flexible materials compensate for the optical absorption by light trapping, and allow tandem cells.     

High-molecular weight sulfur-containing aromatics refractory to weathering as determined by Fourier transform ion cyclotron resonance mass spectrometry

Biomarkers and low-molecular weight polyaromatic compounds have been extensively studied for their fate in the environment. They are used for oil spill source identification and monitoring of weathering and degradation processes. However, in some cases, the absence or presence of very low concentration of such components restricts the access of information to spill source. Here we followed the resistance of high-molecular weight sulfur-containing aromatics to the simulated weathering condition of North Sea crude oil by ultra high-resolution Fourier transform ion cyclotron resonance mass spectrometry. The sulfur aromatics in North Sea crude having double bond equivalents (DBE) from 6 to 14 with a mass range 188-674 Da were less influenced even after 6 months artificial weathering. Moreover, the ratio of dibenzothiophenes (DBE 9)/naphthenodibenzothiophenes (DBE 10) was 1.30 and 1.36 in crude oil and 6 months weathered sample, respectively reflecting its weathering stability. It also showed some differences within other oils. Hence, this ratio can be used as a marker of the studied crude and accordingly may be applied for spilled oil source identification in such instances where the light components have already been lost due to environmental influences.     

The constitutively active Ah receptor (CA-AhR) mouse as a model for dioxin exposure - effects in reproductive organs

The dioxin/aryl hydrocarbon receptor (AhR) mediates most toxic effects of dioxins. In utero/lactational exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) impairs fetal/neonatal development and the developing male reproductive tract are among the most sensitive tissues. TCDD causes antiestrogenic responses in rodent mammary gland and uterus and in human breast cancer cell lines in the presence of estrogen. Also, more recently an estrogen-like effect of TCDD/AhR has been suggested in the absence of estrogen. A transgenic mouse expressing a constitutively active AhR (CA-AhR) was developed as a model mimicking a situation of constant exposure to AhR agonists. Male and female reproductive tissues of CA-AhR mice were characterized for some of the effects commonly seen after dioxin exposure. Sexually mature CA-AhR female mice showed decreased uterus weight, while an uterotrophic assay in immature CA-AhR mice resulted in increased uterus weight. In immature mice, both TCDD-exposure and CA-AhR increased the expression of the estrogen receptor target gene Cathepsin D. When co-treated with 17β-estradiol no increase in Cathepsin D levels occurred in either TCDD-exposed or CA-AhR mice. In sexually mature male CA-AhR mice the weights of testis and ventral prostate were decreased and the epididymal sperm reserve was reduced. The results of the present study are in accordance with previous studies on dioxin-exposed rodents in that an activated AhR (here CA-AhR) leads to antiestrogenic effects in the presence of estrogen, but to estrogenic effects in the absence of estrogen. These results suggest the CA-AhR mouse model as a useful tool for studies of continuous low activity of the AhR from early development, resembling the human exposure situation.     

Exposure assessment at a PCDD/F contaminated site in Sweden—field measurements of exposure media and blood serum analysis

Background, aim, and scope  

The main pathway for human exposure to the highly toxic polychlorinated-p-dioxins and polychlorinated furans [polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs)] is via dietary intake. Other exposure pathways may, however, be important in close proximity to point sources, such as wood preservation sites, where PCDD/F contaminated chlorophenols (CP) were previously used. In this study, a heavily PCDD/F contaminated CP saw mill site in Sweden was investigated. Human exposure through a broad spectrum of exposure pathways was assessed. Such studies are in demand since the question whether contaminated sites represent a current or future risk can only be answered by detailed site-specific risk assessments.     

Impacts of Multiple Stresses on Water Demand and Supply Across the Southeastern United States1

Abstract: Assessment of long‐term impacts of projected changes in climate, population, and land use and land cover on regional water resource is critical to the sustainable development of the southeastern United States. The objective of this study was to fully budget annual water availability for water supply (precipitation ? evapotranspiration + groundwater supply + return flow) and demand from commercial, domestic, industrial, irrigation, livestock, mining, and thermoelectric uses. The Water Supply Stress Index and Water Supply Stress Index Ratio were developed to evaluate water stress conditions over time and across the 666 eight‐digit Hydrologic Unit Code basins in the 13 southeastern states. Predictions from two Global Circulation Models (CGC1 and HadCM2Sul), one land use change model, and one human population model, were integrated to project future water supply stress in 2020. We found that population increase greatly stressed water supply in metropolitan areas located in the Piedmont region and Florida. Predicted land use and land cover changes will have little effect on water quantity and water supply‐water demand relationship. In contrast, climate changes had the most pronounced effects on regional water supply and demand, especially in western Texas where water stress was historically highest in the study region. The simulation system developed by this study is useful for water resource planners to address water shortage problems such as those experienced during 2007 in the study region. Future studies should focus on refining the water supply term to include flow exchanges between watersheds and constraints of water quality and environmental flows to water availability for human use.     

The usage of safety management tools in Swedish municipalities

Although municipalities clearly deal with a broad range of safety issues, little is known about their safety management practices and their usage of safety management tools across sectors. In order to open up the municipal safety management toolbox, this study explores which tools that are being used in Swedish municipalities and by which municipal sector. Our results indicate that tools such as risk inventory, safety rounds and risk analysis are broadly used across most sectors, while usage of other tools is more restricted to certain sectors. Legislative requirements, tool characteristics and actual needs are assumed to influence the usage of tools. Further research in this field is needed for better adaption of safety management tools to municipal needs.     

Use of questionnaires and an expert panel to judge the environmental consequences of chemical spills for the development of an environment-accident index

Assessing the environmental consequences of a chemical accident is a complex task. To date, the methods used to evaluate the environmental effects of an acute release of a chemical have often been based on measurements of chemical and physical variables deemed to be important, such as the concentration of the chemical. However, a broader strategy is needed to predict the environmental consequences of potential accidents during the planning process. An Environment-Accident Index (EAI), a simple tool based on such a strategy, has been developed to facilitate the consideration of a multitude of influential variables. The objectives of this study were to evaluate whether questionnaire-based expert panel's judgements could provide useful data on the environmental consequences of chemical spills, and an effective basis for further development of the EAI. As expected, the judgements did not agree perfectly, but they do give rough indications of the environmental effects, and highlight consistent trends that should be useful inputs for planning, prevention and decontamination processes. The different accidents were also judged to have caused everything from minor to very major effects in the environment, implying that a wide range of accident scenarios were represented in the material and covered by the EAI. Therefore, questionnaires and expert panel judgements can be used to collect useful data for estimating the likely environmental consequences of chemical accidents and for further development of the EAI.