Reducing the risk of invasive forest pests and pathogens: Combining legislation,targeted management and public awareness

Intensifying global trade will result in increased numbers of plant pest and pathogen species inadvertently being transported along with cargo. This paper examines current mechanisms for prevention and management of potential introductions of forest insect pests and pathogens in the European Union (EU). Current European legislation has not been found sufficient in preventing invasion, establishment and spread of pest and pathogen species within the EU. Costs associated with future invasions are difficult to estimate but past invasions have led to negative economic impacts in the invaded country. The challenge is combining free trade and free movement of products (within the EU) with protection against invasive pests and pathogens. Public awareness may mobilise the public for prevention and detection of potential invasions and, simultaneously, increase support for eradication and control measures. We recommend focus on commodities in addition to pathways, an approach within the EU using a centralised response unit and, critically, to engage the general public in the battle against establishment and spread of these harmful pests and pathogens.     

Adsorptive amputation of hazardous azo dye Congo red from wastewater: a critical review

Increasing amount of dyes in an ecosystem has propelled the search of various methods for dye removal. Amongst all the methods, adsorption occupies a prominent place in dye removal. Keeping this in mind, many adsorbents used for the removal of hazardous anionic azo dye Congo red (CR) from aqueous medium were reviewed by the authors. The main objectives behind this review article are to assemble the information on scattered adsorbents and enlighten the wide range of potentially effective adsorbents for CR removal. Thus, CR sorption by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites are surveyed and critically reviewed as well as their sorption capacities are also compared. This review also explores the grey areas of the adsorption performance of various adsorbents with reference to the effects of pH, contact time, initial dye concentration and adsorbent dosage. The equilibrium adsorption isotherm, kinetic and thermodynamic data of different adsorbents used for CR removal were also analysed. It is evident from a literature survey of more than 290 published papers that nanoparticle and nanocomposite adsorbents have demonstrated outstanding adsorption capabilities for CR.

Open image in new window

Graphical abstract ?

     

Epiphytische Flechten im Wandel von Immissionen und Klima ? Ergebnisse einer Vergleichskartierung 1989/2007 in Nordwestdeutschland

Zusammenfassung   Hintergrund, Ziel und Zweck Borkenbewohnende (epiphytische) Flechten reagieren sehr empfindlich auf verschiedene Umwelteinflüsse wie Stoffgehalte in der Atmosph?re und Temperaturen. Sie haben als Bioindikatoren für Luftverunreinigungen einen hohen Stellenwert bei Umweltuntersuchungen. Basierend auf einer 1989 durchgeführten Kartierung borkenbewohnender (epiphytischer) Flechten in einem landwirtschaftlich intensiv genutzten Raum Nordwestdeutschlands erfolgte 2007 eine Wiederholungsuntersuchung. Dabei galt es, m?gliche Ver?nderungen der Immissionssituation und des Klimas zu erkennen. Material und Methoden Die Studie basiert auf einer vergleichenden Kartierung epiphytischer Flechten von 355 Tr?gerb?umen an 45 Monitoringpunkten. Die angewandte Methode orientiert sich an der 1989 angewandten halb-quantitativen Erfassung. Ergebnisse Es stellten sich gravierende Ver?nderungen in der Vegetation rindenbewohnender Flechten heraus. Insgesamt war eine Erh?hung der Artenzahl an nahezu allen Monitoringpunkten festzustellen. Es wurde eine sehr starke Abnahme s?uretoleranter Arten und eine deutliche Zunahme basen- und n?hrstofffordernder Flechtenarten festgestellt. Darüber hinaus zeigte sich eine deutliche Zunahme w?rmeliebender Flechtenarten mit einem Verbreitungsschwerpunkt in Südeuropa bei gleichzeitigem Rückgang von Arten mit einem boreal-montanem Verbreitungsschwerpunkt. Diskussion Die festgestellte Entwicklung steht im Einklang mit überregionalen Beobachtungen. Sie wird im Wesentlichen auf eine gro?r?umig ver?nderte Immissionssituation, d. h. einer Abnahme der atmosph?rischen SO₂-Belastung und Zunahme der Ammoniakbelastung zurückgeführt. Ebenso treten deutliche Auswirkungen der Klimaerw?rmung hervor. Schlussfolgerungen Mit relativ geringem Untersuchungsaufwand lie?en sich Ver?nderungen bei den epiphytischen Flechten in den letzten 18 Jahren aufzeigen. Diese sind relevant für die Beurteilung regional und kleinr?umig ver?nderter Umweltbedingungen, die auch für andere Organismen und ?kosysteme l?ngerfristig von gro?er Bedeutung sind. Empfehlungen und Ausblick Unter Verwendung standardisierter Methoden vermitteln epiphytische Flechten ein differenziertes Bild der Luftbelastungssituation in Ballungsr?umen und in landwirtschaftlich genutzten Regionen. Darüber hinaus sind sie offensichtlich gute Indikatoren für Temperatur?nderungen ihrer Umgebung. Weiterer Forschungsbedarf besteht für die Verwendung epiphytischer Flechten zum Biomonitoring von Klimaver?nderungen.      

Use and knowledge of fuelwood in three rural caatinga (dryland) communities in NE Brazil

The woody species known, used, and preferred as fuelwood were examined in three rural communities within the county of Soledade, Paraíba State, NE Brazil. Ethnobotanical information was collected using semi-structured interviews with more than 90% of the local households (55 adult residents; 31 women, and 24 males). The interviewees cited 36 plant species as fuelwoods, distributed among 30 genera and 15 families, in addition to two unidentified plants. The plant families represented by the largest numbers of species were Euphorbiaceae, Anacardiaceae, Mimosaceae, Caesalpiniaceae, Sapotaceae, and Fabaceae. The species Caesalpinia pyramidalis Tul. (“catingueira”) was cited with the greatest frequency in all three communities. Within the communities we found significant differences on the number of plants cited and actually used (p < 0.05), indicating that the residents knew more fuelwood species than they effectively harvest. The different distances from the communities to the urban centers were not related to differences on the use or the size of the stocks of fuelwood. Additionally, the study revealed that the communities examined still maintain a significant knowledge of the use of energy-providing plants in spite of the widespread use of liquefied petroleum gas (LPG). Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

A detailed field-based evaluation of naphthenic acid mobility in groundwater

An anaerobic plume of process-affected groundwater was characterized in a shallow sand aquifer adjacent to an oil sands tailings impoundment. Based on biological oxygen demand measurements, the reductive capacity of the plume is considered minimal. Major dissolved components associated with the plume include HCO₃, Na, Cl, SO₄, and naphthenic acids (NAs). Quantitative and qualitative NA analyses were performed on groundwater samples to investigate NA fate and transport in the subsurface. Despite subsurface residence times exceeding 20 years, significant attenuation of NAs by biodegradation was not observed based on screening techniques developed at the time of the investigation. Relative to conservative tracers (i.e., Cl), overall NA attenuation in the subsurface is limited, which is consistent with batch sorption and microcosm studies performed by other authors. Insignificant biological oxygen demand and low concentrations of dissolved As (< 10 µg L^− 1) in the plume suggest that the potential for secondary trace metal release, specifically As, via reductive dissolution reactions driven by ingress of process-affected water is minimal. It is also possible that readily leachable As is not present in significant quantities within the sediments of the study area. Thus, for similar plumes of process-affected groundwater in shallow sand aquifers which may occur as oil sands mining expands, a reasonable expectation is for NA persistence, but minimal trace metal mobilization.     

Predicted concentrations of biocides from antifouling paints in Visakhapatnam Harbour

The concentrations of biocides leached from antifouling coatings are monitored in most of the developed countries. However, in India and many other developing countries, there is very little data available on the concentrations of biocides in ports and harbours. The first step was to obtain the order of magnitude levels of concentrations of biocides in the marine environment of the Visakhapatnam Harbour, and the MAM-PEC (Marine Antifoulant Model to Predict Environmental Concentrations) model was used to predict these values. The Visakhapatnam Port lies on the eastern coast of India, roughly halfway between Chennai and Kolkata, and is the largest port in India. This port is a natural harbour; the long and narrow outlet to the open sea makes it a 'poorly flushed' harbour. Predicted concentrations of tributyltin (TBT), copper, dichlofluanid, seanine, irgarol, diuron, tolylfluanid, and zinc pyrithione were computed. The results of the computations indicate that the levels of these biocides are comparable to those in many western countries. This gives credence to the fact that persistence of TBT and some other biocides is a global problem that cannot be ignored.     

Environmental Exposure of Aquatic and Terrestrial Biota to Triclosan and Triclocarban1

Abstract: The synthetic biocides triclosan (5‐chloro‐2‐(2,4‐dichlorophenoxy)phenol) and triclocarban (3,4,4′‐trichlorocarbanilide) are routinely added to a wide array of antimicrobial personal care products and consumer articles. Both compounds can persist in the environment and exhibit toxicity toward a number of biological receptors. Recent reports of toxicological effects in wildlife, human cell cultures, and laboratory animals have heightened the interest in the occurrence of these biocide and related toxic effects. The present study aimed to summarize published environmental concentrations of biocides and contrast them with toxicity threshold values of susceptible organisms. Environmental occurrences and toxicity threshold values span more than six orders of magnitude in concentration. The highest biocide levels, measured in the mid parts‐per‐million range, were determined to occur in aquatic sediments and in municipal biosolids destined for land application. Crustacea and algae were identified as the most sensitive species, susceptible to adverse effects from biocide exposures in the parts‐per‐trillion range. An overlap of environmental concentrations and toxicity threshold values was noted for these more sensitive organisms, suggesting potential adverse ecological effects in aquatic environments. Affirmative evidence for this is lacking, however, since studies examining environmental occurrences of biocides vis‐à‐vis the health and diversity of aquatic species have not yet been conducted.     

Screening and identification of early warning algal species for metal contamination in fresh water bodies polluted from point and non-point sources

The water bodies of Lucknow, Unnao and Kanpur (U.P.), India polluted through various point and non point sources were found to be either eutrophic or oligotrophic in nature. These water bodies supported a great number of algal diversity, which varied seasonally depending upon the physico-chemical properties of water. Further, the water bodies polluted through non point sources supports diverse algal species, while the water bodies polluted through point sources supports growth of tolerant blue green algae. High biomass producing algal species growing in these water bodies have accumulated significant amount of metals in their tissues. Maximum amount of Fe was found accumulated by species of Oedogonium sp. II (20,523.00 mug g(-1) dw) and Spirogyra sp. I (4,520.00 mug g(-1) dw), while maximum Chromium (Cr) was found accumulated in Phormedium bohneri (2,109.00 mug g(-1) dw) followed by Oscillatoria nigra (1,957.88 mug g(-1) dw) and Oedogonium sp. I (156.00 mug g(-1) dw) and Ni in Ulothrix sp. (495.00 mug g(-1) dw). Results showed that some of these forms growing in polluted environment and accumulating high amounts of toxic metals may be used as bioindicator species, however, their performance in metal contaminated water under different ecological niche is to be ascertained.     

The 210Po and 210Pb levels in surface sediment samples in the Izmir Bay (Aegean Sea-Turkey)

Bottom sediments reflect in general the relative contamination of a sea area. Therefore, a great deal of monitoring work has been dedicated to the analysis of bottom sediments. Izmir Bay is a very important pollution centre in Turkish Aegean coast region due to a densely populated community, industrial complex and maritime transportation, and there are many streams flowing into the bay that pass through a number of industrial and agricultural areas. It had received the majority of domestic and industrial wastewaters until the wastewater treatment plant was constructed. It is well known that sediments play an important role as reservoirs of a fraction of the pollution in aquatic systems. Therefore, sediment samples were collected monthly from three stations which are located in the inner part of the bay during the period January to December 2003. Temporal variations and seasonal changes on their ²¹⁰Po and ²¹⁰Pb contents were examined, and the activity concentrations of ²¹⁰Po and ²¹⁰Pb were found to vary from 43±6 to 132±12 and 27±5 to 91±9 Bq kg^???1 dry wt, respectively. The highest values of those natural radionuclides were measured at Kar??yaka Station because of the current systems of the bay. Seasonally, the ²¹⁰Pb levels were found to increase during the winter time for all the stations.