Screening pesticides for their ability to damage bacterial DNA

Twenty-six pesticides and pesticide degradation products were screened (125 micrograms - 2000 micrograms) for their ability to induce unrepairable damage to bacterial DNA. Three repair test systems were utilized in this study, the Salmonella typhimurium (TA1538/TA1978), the E. coli K-12 (Pol A1+/Pol1-) and the E. coli WP2 (WP2, WP2uvrA, WP67, CM611 and CM571). Aldicarb (1000 micrograms), benomyl (250 micrograms), 2-aminobenzimidazole (2000 micrograms), captan (125 micrograms), fenazalor (500 micrograms), 5,6-dichloro-2-trifluoromethylbenzimidazole (NC-2983) (250 micrograms), isothymol (250 micrograms), maleic hydrazide (1000 micrograms), pentachloronitrobenzene (1000 micrograms) were DNA-damaging to one or more bacterial test systems. Isothymol and NC-2983 affected all three test systems. Chlorinated hydrocarbon insecticides, some being recognized as carcinogens, did not produce a zone of inhibition in any of the tester strains possibly due to their poor solubility and diffusion in the agar overlay. It was concluded that these tests can be performed along with bacterial reversion tests to complement each other as short-term screening tests for potential carcinogens and mutagens.     

Recycling soil nitrate nitrogen by amending agricultural lands with oily food waste

With current agricultural practices the amounts of fertilizer N applied are frequently more than the amounts removed by the crop. Excessive N application may result in short-term accumulation of nitrate nitrogen (NO3-N) in soil, which can easily be leached from the root zone and into the ground water. A management practice suggested for conserving accumulated NO3-N is the application of oily food waste (FOG; fat + oil + greases) to agricultural soils. A two-year field study (1995-1996 and 1996-1997) was conducted at Elora Research Center (43 degrees 38' N, 80 degrees W; 346 m above mean sea level), University of Guelph, Ontario, Canada to determine the effect of FOG application in fall and spring on soil NO3-N contents and apparent N immobilization-mineralization of soil N in the 0- to 60-cm soil layer. The experiment was planned under a randomized complete block design with four replications. An unamended control and a reference treatment [winter wheat (Triticum aestivum L.) cover crop] were included in the experiment to compare the effects of fall and spring treatment of oily food waste on soil NO3-N contents and apparent N immobilization-mineralization. Oily food waste application at 10 Mg ha(-1) in the fall decreased soil NO3-N by immobilization and conserved 47 to 56 kg NO3-N ha(-1), which would otherwise be subject to leaching. Nitrogen immobilized due to FOG application in the fall was subsequently remineralized by the time of fertilizer N sidedress, whereas no net mineralization was observed in spring-amended plots at the same time.     

A probabilistic approach to obtaining limiting estimates of radionuclide concentration in biota

The US Department of Energy has developed a graded approach for evaluating radiation doses to biota. Limiting concentrations of radionuclides in water, soil, and sediment were derived for twenty-three radionuclides. Four organism types (aquatic animals, riparian animals, terrestrial animals, and terrestrial plants) were selected as the basis for method development. While environmental transfer data needed for deriving biota tissue concentrations are available for aquatic animals and terrestrial plants, less information is available for terrestrial and riparian organisms. Two methods were applied and examined for their ability to provide estimates of organism:soil or organism:water concentration factors in lieu of measured data. The kinetic/allometric approach combined with a parameter uncertainty analysis provides a needed method to estimate concentration factors across multiple species with limited input data.     

Testicular histopathology in deer mice (Peromyscus maniculatus) following exposure to polychlorinated biphenyl

Adult deer mice testes were subjected to routine histopathology following exposure to Aroclor 1254 supplemented diet (5 ppm), for 30 days. Body and testicular weight revealed no statistical significance between the control and treated animals. From a histological standpoint the testes of the controls were similar to normal murids and other animals. In contrast, the testes from treated animals displayed seminiferous tubules with significant degenerative alterations. These alterations included fewer layers of seminiferous epithelium exaggerated intercellular spaces and appearance of pyknotic nuclei. Most tubules displayed subluminal nuclei that morphologically could be identified as part of spermatozoa heads and these usually lacked tails, indicating that the treatment interfered with spermiogenesis. Therefore, we concluded that Aroclor 1254 as an environmental contaminant is highly destructive to seminiferous tubules, and that these histological alterations undoubtedly are responsible for the depressed fertility in Peromyscus following chronic exposure to PCBs, that has been reported in the literature.     

Mutagenicity tests with gallic and tannic acid in the Salmonella/mammalian microsome assay

Gallic acid, tannic acid mixture and a purified fraction of tannic acid were evaluated for possible mutagenic activity in three strains of Salmonella typhimurium, TA98, TA100, and TA1535. These chemicals were not mutagenic either before or after activation with rat and woodchuck microsomal and cytosolic enzymes. However, tannic acid mixture and tannic acid fraction both gave a significantly (p = 0.05) dose-related reduction in the number of the revertant colonies, compared to the normal spontaneous revertants with no apparent toxic effects in the background lawn. With an agar diffusion assay, the chemicals exhibited toxic effects at 5000 micrograms/disc.     

Differential degradation of crude oil （Bonny Light） by four Pseudomonas strains

Four hydrocarbon degraders isolated from enriched oil- and asphalt-contaminated soils in Lagos, Nigeria, were tested for their petroleum degradation potentials. All the isolates were identified as species of Pseudomonas. Pseudomonas putida P11 demonstrated a strong ability to degrade kerosene, gasoline, diesel, engine oil and crude oil while P. aeruginosa BB3 exhibited fair degradative ability on crude oil, gasoline, engine oil, anthracene and pyrene but weak on kerosene, diesel and dibenzothiophene. Pseudomonas putida WL2 and P. aeruginosa MVL1 grew on crude oil and all its cuts tested with the latter possessing similar polycyclic aromatic potentials as P11. All the strains grew logarithmically with 1–2 orders of magnitude and with generation time ranging significantly between 3.07 and 8.55 d at 0.05 level of confidence. Strains WL2 and MVL1 utilized the oil substrate best with more than 70% in 6 d experimental period, whereas the same feat was achieved by P11 in 12 d period. BB3 on the other hand degraded only 46% within 6 d. Interestingly, data obtained from gas chromatographic analysis of oil recovered from the culture fluids of MVL1 confirmed near-disappearance of major peaks (including aliphatics and aromatics) in the hydrocarbon mixture.     

Failure case studies of SA213-T22 steel tubes of boiler through computer simulations

Increased temperature and decreased hardness values of the tube metal and development of oxide scale on the inner surface of boiler tubes over prolonged period of time are typical problems in power plants. Appropriate life assessments or condition monitoring of boiler tube should be carried out from time to time. Computer simulations may economically support the post-failure assessment method, i.e. visual inspections, metallurgical examinations and mechanical strength measurements. However, estimations obtained from the simulations may provide an advanced warning to take preventive actions prior to failure. In this work two failure cases of the reheater and superheater tubes made of a typical material of SA213-T22 steel are evaluated. As the oxide scales are increasingly developed on the inner surface, the increasing of temperature and decreasing of hardness value in tube metal for both cases are determined. The remnant life estimations are then made in the form of creep cumulative damages.     

Sago pith waste ash as a potential raw material for ceramic and geopolymer fabrication

Journal of Material Cycles and Waste Management - This study focuses on the potential usage of sago pith waste ash (SPWA) obtained from sago pith waste (SPW) calcined from 500 to...     

Numerical modelling of the groundwater inflow to an advancing open pit mine: Kolahdarvazeh pit,Central Iran

The groundwater inflow into a mine during its life and after ceasing operations is one of the most important concerns of the mining industry. This paper presents a hydrogeological assessment of the Irankuh Zn-Pb mine at 20 km south of Esfahan and 1 km northeast of Abnil in west-Central Iran. During mine excavation, the upper impervious bed of a confined aquifer was broken and water at high-pressure flowed into an open pit mine associated with the Kolahdarvazeh deposit. The inflow rates were 6.7 and 1.4 m³/s at the maximum and minimum quantities, respectively. Permeability, storage coefficient, thickness and initial head of the fully saturated confined aquifer were 3.5?×?10^?4 m/s, 0.2, 30 m and 60 m, respectively. The hydraulic heads as a function of time were monitored at four observation wells in the vicinity of the pit over 19 weeks and at an observation well near a test well over 21 h. In addition, by measuring the rate of pumping out from the pit sump, at a constant head (usually equal to height of the pit floor), the real inflow rates to the pit were monitored. The main innovations of this work were to make comparison between numerical modelling using a finite element software called SEEP/W and actual data related to inflow and extend the applicability of the numerical model. This model was further used to estimate the hydraulic heads at the observation wells around the pit over 19 weeks during mining operations. Data from a pump-out test and observation wells were used for model calibration and verification. In order to evaluate the model efficiency, the modelling results of inflow quantity and hydraulic heads were compared to those from analytical solutions, as well as the field data. The mean percent error in relation to field data for the inflow quantity was 0.108. It varied between 1.16 and 1.46 for hydraulic head predictions, which are much lower values than the mean percent errors resulted from the analytical solutions (from 1.8 to 5.3 for inflow and from 2.16 to 3.5 for hydraulic head predictions). The analytical solutions underestimated the inflow compared to the numerical model for the time period of 2–19 weeks. The results presented in this paper can be used for developing an effective dewatering program.