Environmental public opinion in U.S. states, 1973–2012

Partisan polarization of public opinion is a major trend in American environmental politics. While the national pattern is widely recognized, scholars know much less about the polarization of public opinion over time at the state level. This lack of knowledge is unfortunate because geographic variation in the polarization of opinion is essential for explaining the origins of partisan polarization and evaluating its consequences for policy. To fill the gap, the multilevel regression and poststratification technique is applied to provide credible estimates of state-level environmental public opinion for both Democrats and Republicans, 1973–2012. It appears that the growing partisan gap reflects increased pro-environmental opinion among Democrats across many states, whereas Republican state-level public opinion is converging toward a much lower baseline. Cross-state variation among both parties has decreased over time, contributing to greater partisan polarization in the aggregate. Changes in the sorting of voters in and out of political parties cannot explain these patterns of polarization.     

Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Analysis and evaluation of chlorinated persistent organic compounds and PAHs in sludge in Korea

The concentrations of 12 POPs listed in the Stockholm convention, chlorophenols (CPs) and PAHs were investigated in sludge samples from wastewater and sewage treatment plants (WWTPs and STPs). The concentrations of PCDD/Fs in the wastewater sludge ranged from 0.189 to 1092 ng-TEQkg(-1) dry wt., and most of the sludge samples had levels below the EU guideline for the land application of PCDD/Fs (<100 ng-TEQkg(-1) dry wt.) except one sample. Co-PCB congeners were analyzed from four WWTPs, with total concentrations ranging from 0.265 to 26.6 ng-TEQkg(-1) dry wt., which were similar to the results obtained from previous studies. The levels of PCDD/Fs and Co-PCBs varied according to the main source of the influent to each WWTP and the paper industry was the main source of these compounds in the sludge due to the chlorine bleaching process. In case of OCPs, HCB and p,p'-DDE were detected at relatively high levels in the sludge samples compared to other target compounds, ranging from 1.30 to 21.5 microg kg(-1) dry wt. and 0.758 to 14.8 microg kg(-1) dry wt., respectively. Different OCP distribution patterns were observed according to sludge types, with HCB and DDTs being dominant in the sludge from WWTPs and STPs, respectively. The total levels of PAHs and CPs ranged from 1.24 to 44.9 mg kg(-1) dry wt. and 0.340 to 3.85 mg kg(-1) dry wt., respectively. The PAHs and CPs were also shown to have various distribution patterns, possibly due to the different wastewater sources to the WWTPs.     

Estimation of required monitoring time for obtaining validation data in enclosed spaces

Methods for estimating airborne contaminant concentrations at specific locations within enclosed spaces, such as mathematical models and computational fluid dynamics (CFD), often are validated against directly measured concentrations. However, concentration variation with time introduces uncertainty into the measured concentration. Failure to determine monitoring time requirements can lead to errors in quantifying representative concentrations, which are likely to be attributed to errors in the method being validated. In the current study, to obtain the representative concentrations at multiple locations with a direct reading instrument, we used the standard deviation ratio (SDR) method to determine the required minimum monitoring time within a specified precision limit. To demonstrate the use of the SDR approach in constructing precision confidence intervals, tracer gas concentrations at nine sampling locations in an experimental room were measured to obtain population parameters. Three flow rates of 0.9, 3.3 and 5.5 m(3) min(-1) were employed and contaminant concentrations were measured using a photoionization analyser. Monitoring time requirements varied substantially with location within the room and were strongly dependent upon the flow rate of air through the room. The proposed method would be very useful for industrial hygienists and indoor air researchers who sometimes need to obtain several hundred measured concentrations for validation purposes or to perform tests under repeatable conditions in enclosed spaces. This study also showed that the proposed method can be used to devise efficient indoor monitoring strategies.     

The opposing effects of bacterial activity and gas production on anaerobic TCE degradation in soil columns

This laboratory study explores the effect of growth substrate concentration on the anaerobic degradation of trichloroethylene (TCE) in sand packed columns. In all columns the growth substrate rapidly degraded to gas, that formed a separate phase. Biomass accumulated in the 0–4.8 cm section of the columns in proportion to the influent growth substrate concentration and biomass concentrations in the remaining sections of all columns were similar to the column receiving the lowest substrate concentration. Increases in growth substrate concentration up to 3030 mg-COD l⁻¹ promoted TCE degradation, but a further increase to 14 300 mg-COD l⁻¹ reduced the amount of TCE completely dechlorinated but did not affect the production of chlorinated TCE intermediates. The mathematical model developed here satisfactorily described the enhancement in TCE dehalogenation for substrate concentration up to 3030 mg-COD l⁻¹; reproducing TCE dehalogenation for 14 300 mg-COD l⁻¹ required that the moisture content used in simulation be lowered to 0.1. The study shows that volatilization of TCE can be significant and volatilization losses should be taken into account when anaerobic activity in in-situ bioremediation applications is stimulated via addition of growth substrates. An implication of the modeling simulations is that maintaining a lower, but uniform, substrate concentration over the contaminated region may lead to faster contaminant degradation.     

Molecular approaches for the detection and monitoring of microbial communities in bioaerosols: A review

Bioaerosols significantly affect atmospheric processes while they undergo long-range vertical and horizontal transport and influence atmospheric chemistry and physics and climate change. Accumulating evidence suggests that exposure to bioaerosols may cause adverse health effects, including severe disease. Studies of bioaerosols have primarily focused on their chemical composition and largely neglected their biological composition and the negative effects of biological composition on ecosystems and human health. Here, current molecular methods for the identification, quantification, and distribution of bioaerosol agents are reviewed. Modern developments in environmental microbiology technology would be favorable in elucidation of microbial temporal and spatial distribution in the atmosphere at high resolution. In addition, these provide additional supports for growing evidence that microbial diversity or composition in the bioaerosol is an indispensable environmental aspect linking with public health.     

Size-selective sampling of particulates using a physiologic sampling pump

Recent laboratory research indicates physiologic sampling of gas and vapor may provide more representative estimates of personal exposures than traditional methods. Modifications to the physiologic sampling pump (PSP) used in that research are described which extend its usefulness to size-selective sampling of particulates. PSPs used in previous research varied motor speed to keep sampling proportional to the subject's inhalation. This caused airflow and particle velocities through the collection device to continually change making those pumps unsuitable for sampling particulates. The modified implementation of the PSP pulls a constant airflow into and through a cyclone, then uses valves to either direct the airflow through, or divert the airflow around, the sampling filter. By using physiologic inputs to regulate the fraction of each second that air flows through the sampling filter, samples may be collected in proportion to inhalation rate. To evaluate the performance of a functional prototype 5 different sizes of monodisperse aerosols of ammonium fluorescein were generated by a vibrating orifice aerosol generator and introduced into a calm air chamber. To simulate different inhalation rates the valves of the PSP were energized using 9 different duty cycles. Efficiency curves are presented and compared to a standard respirable convention by bias mapping. The performance of the modified cyclone used in the PSP sampling head compared favorably with a commercially available cyclone of the same model, operating at a constant airflow (± 10% over almost all the size distributions of concern). The new method makes physiologic sampling of the respirable fraction of particulates feasible.     

The impact of size-segregated particle properties on daily mortality in Seoul,Korea

Environmental Science and Pollution Research - To investigate the causative component for certain health outcomes, the associations between the properties of ambient particles and cause-specific...     

Effect of biogeochemical interactions on bioaccessibility of arsenic in soils of a former smelter site in Republic of Korea

The total concentration-based regulations for soil remediation do not consider the possible changes in bioaccessibility of remaining arsenic (As) in soils due to biogeochemical interactions after remediation. This study used As-contaminated soil and pore water samples that were collected from the rice paddy and forest/farmland located in the vicinity of a former smelter site in Republic of Korea to elucidate the changes in As bioaccessibility due to biogeochemical interactions. Bioaccessibility and chemical forms of As in soils were determined by using an in vitro method and sequential extraction, respectively, and soil microbial community was evaluated. Bioaccessibility of As in the rice paddy soil samples was higher than that in the forest/farmland soil samples. This could be attributed to relatively higher dependence of bioaccessible As in the rice paddy soils on the soil concentration of iron (Fe), aluminum, or manganese, which could lead to greater changes in bioaccessible As via reductive dissolution. The strong linear relationship (R ² = 0.90, p value ≤0.001) between the pore water As and Fe concentrations, and the greater portion of bacterial species related to reductive dissolution of Fe oxides in the rice paddies can support the higher As bioaccessibility promoted by reductive dissolution. Therefore, it is necessary to consider the potential changes in the bioaccessible As due to biogeochemical interactions in remediation of As-contaminated soils, particularly when soils are likely to be reused under reductive dissolution-promoting conditions (e.g., flooded conditions).     

Recovery of Pd as PdO from Pd/SiO2 catalyst by leaching using hydrochloric acid

Journal of Material Cycles and Waste Management - The recovery of Pd from spent catalysts has been gaining attention due to its high economic value and limited availability in nature. To recover...