Performance evaluation of material separation from spent fluorescent lamps using the thermal end-cutting method

The recovery of valuable materials such as aluminum, phosphor powder, and glass from spent fluorescent lamps (SFLs) is part of the overall recycling process of lamps. In the end-cutting process, an SFL is separated into a base cap and a glass part using thermal shock caused by the temperature difference between the heating unit and the cooling unit. The separation efficiency of the end-cutting system is estimated by measuring the mass of the parts of the SFL. The optimum condition of the end-cutting process with thermal shock was determined to have a temperature difference of 600 °C and moving speed of 2 cm/s. At optimum conditions, the separation efficiency of glass and the end cap from an SFL using the end-cutting method is estimated to be more than about 97 %. In an air injection system, however, the separation efficiency of phosphor powder from glass is less than 50 %. Separation efficiency in the end-cutting system is increased by decreasing the moving speed of the SFL and increasing the temperature difference between the heating unit and the cooling unit. From the results of experiments, it was found that the end-cutting unit has very high performance because the overall separation efficiency is more than 95 %.     

Experimental study on electrostatic charging of polymer powders in mixing processes

Powder mixing is often carried out in the chemical and pharmaceutical industries. Electrostatic charges generated on polymer powders during mixing may lead to electrostatic problems due to the poor conductivity of those powders. In this study, we investigated the electrostatic charges, surface potential, and apparent volume resistivity of sample powders using a simple mixing device utilizing the Faraday cup method. To neutralize the charged powders, we also applied an AC-type ionizer in the mixing study. A commercial polyethylene powder with a mean particle size of 585 μm was tested in this experiment. The charge-to-mass ratios at the end of 600 s of mixing were ?0.075 nC/g at 295 rpm agitation speed, ?0.21 nC/g at 495 rpm, and ?0.31 nC/g at 660 rpm, high enough to cause electrostatic agglomeration and adhesion. The electric fields based on the surface potential on the powders were several hundreds of V/cm, too small to give rise to brush discharge. The apparent volume resistivity of powders estimated by a simple measurement system is 1.0 × 10¹⁶ Ωm, in reasonable agreement with that acquired by the conventional test cell method (5.9 × 10¹⁵ Ωm). The charging level on the polymer powders was reduced with an AC-ionizer.     

Strategies for sustainable development of industrial park in Ulsan,South Korea—From spontaneous evolution to systematic expansion of industrial symbiosis

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.     

Concentrations and activity ratios of uranium isotopes in the groundwater of the Okchun Belt in Korea.

Groundwater samples obtained from the Okchun Belt in Korea were separated into particulate and filtered fraction using a 0.45 microm membrane filter and concentrations and activity ratios of uranium isotopes in the fractions were determined by chemical separation and alpha-spectrometric measurements. Most of the uranium isotopes in the groundwater were found in the filtered water. Only less than 1% of the total uranium was detected in the particulate fraction. The concentrations and activity ratios of uranium isotopes in the groundwater measured in this study were variable, depending upon sampling site. Owing to a rapid material exchange between the subterranean hot waters and the rock strata, the concentrations of 238U in the groundwater in the hot spring area were found to be about four times higher than those elsewhere. Because of the alpha-particle recoil effect, the activity ratios of 234U/238U in the groundwater taken at "cold" spring sites were variable within the range 1.20 to 3.58, depending on the residence time of the groundwater. In the hot spring area, the activity ratios of 234U/238U were close to the equilibrium value (1.10 +/- 0.07) due to rapid erosion of the rock strata by the hot spring water.     

Enhancement of aerobic biodegradation in an oxygen-limiting environment using a saponin-based microbubble suspension

This study investigated the ability of a saponin-based microbubble suspension to enhance aerobic biodegradation of phenanthrene by subsurface delivery. As the microbubble suspension flowed through a sand column pressure buildup and release was repeatedly observed, which delivered oxygen to the less permeable regions. Burkholderia cepacia RPH1, a phenanthrene-degrading bacterium, was mainly transported in a suspended form in the microbubble suspension. When three pore volumes of the microbubble suspension containing B. cepacia RPH1 was introduced into a column contaminated with phenanthrene (100 mg/kg), the oxygen content declined to 5% from an initial value of 20% within 5 days and correspondingly, 34.4% of initial phenanthrene was removed in 8 days. The addition of two further three pore volumes enhanced the biodegradation efficiency by a factor of 2.2. Our data suggest that a saponin-based microbubble suspension could be a potential carrier for enhancing the aerobic biodegradation under an oxygen-limiting environment.     

Mass Load-Based Pollution Management of the Han River and Its Tributaries, Korea

Spatio-temporal variations of biochemical oxygen demand (BOD) and total coliform (TC) in the Han River, Korea, were investigated in terms of concentration-based and mass loading-based approaches. Considering the river water quality criteria regulated by the Ministry of Environment in Korea, the tributaries linked to the mainstream of the Han River were found to be highly contaminated with respect to both BOD and TC and, in fact, most of the tributaries exceeded the maximum water quality criteria. To evaluate the pollution impact of tributaries on the mainstream, the monthly water quality monitoring data for six years (from 1995 to 2000) were collected from the Han River basin, and statistically analyzed using Pearson’s correlation coefficient. The results revealed that mass loading-based approach was superior to the concentration-based approach for effective Han River watershed management. Overall results supported that the mass loading-based approach associated with total maximum daily loads (TMDL) management would be a useful and suitable protocol in watershed management for improving the water quality of the Han River and protecting public health. Therefore, this study supporting TMDL management can be applicable to a wide array of contaminants and watershed settings in Korea.     

GIS BASED LONG TERM HYDROLOGIC IMPACT EVALUATION FOR WATERSHED URBANIZATION1

ABSTRACT: To adequately manage impacts of ongoing or future land use changes in a watershed, the magnitude of their hydrologic impacts needs to be assessed. A grid based daily streamflow model was calibrated with two years of observed streamflow data, using time periods when land use data are available and verified by comparison of model predictions with observed streamflow data. Streamflow data were separated into direct runoff and baseflow to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from 30 years of simulation results and the change in these ratios with urbanization shows that estimated annual direct runoff increased from 49.2 percent (1973) to 63.1 percent (1984) and 65.0 percent (1991), indicating the effects of urbanization are greater on direct runoff than on total runoff. The direct runoff ratio also varies with annual rainfall, with dry year ratios larger than those for wet years. This suggests that the impact of urbanization on areas that are sensitive to runoff ratios, such as stream ecosystems, might be more serious during drier years than in wetter years in terms of water quality and water yield. This indicates that sustainable base‐flow is important to maintaining sound stream ecosystems.     

Prediction of Total Sediment Load in Sand‐Bed Rivers in Korea Using Lateral Distribution Method

A new method for numerically predicting the total sediment load in a river is proposed. The method can be used to predict the total sediment load with information on channel geometry and slope, flow, and bed materials. The conventional method uses a 1D approach that assumes the channel has a wide rectangular shape. However, the proposed method computes depth‐averaged velocity over the width and predicts the total sediment load based on the flow computations. The new method, therefore, is expected to predict better if the flow changes significantly in the lateral direction. The proposed method was applied to three large sand‐bed rivers in Korea, where information is available regarding suspended sediment. Five formulas were tested of use in making total sediment load computations, namely Engelund‐Hansen's, Ackers‐White's, Yang's, Brownlie's, and Karim's formulas. The predicted total sediment loads are compared not only with measured data but also with results calculated using the 1D approach. Discrepancy ratios between the predicted and measured total sediment loads are given and the results are discussed.     

Survey‐Based Approach for Hydrological Vulnerability Indicators Due to Climate Change: Case Study of Small‐Scale Rivers1

Jung, Yong and Minha Choi, 2012. Survey‐Based Approach for Hydrological Vulnerability Indicators Due to Climate Change: Case Study of Small‐Scale Rivers. Journal of the American Water Resources Association (JAWRA) 48(2): 256‐265. DOI: 10.1111/j.1752‐1688.2011.00608.x Abstract: The vulnerability indicators can be used to develop water resource policy in the context of climate change. The Delphi method, an interactive prediction technique, is an efficient way to apply weighting functionality to vulnerability indicators consisting of three parts: Exposure, Sensitivity, and Adaptive Capacity on climate change. The Delphi method is an anonymous iterative survey of expert opinion, which is then shared with other participants. A total of three different rounds were carried out. The first round was a problem selection set, and the second and third were the standard Delphi survey. Fifty‐eight experts (66% academic and 34% practitioner) were invited. The rates of reply were 59, 50, and 38% for the first, second, and third Delphi processes, respectively. The degree of consensus of the Delphi survey was validated via variance changes and Kendall’s W test. Exposure and Adaptive Capacity presented increased levels of agreement among respondents in their given priorities. Particularly strong convergence (0.20 to 0.71 in Kendall’s W) of the experts’ opinions for Adaptive Capacity was observed. The results of this study indicate that finalized factors with ultimate weights through the Delphi method can be a strong support for governmental policy making with respect to climate change.