Characterization of atmospheric particulates, particle-bound transition metals and polycyclic aromatic hydrocarbons of urban air in the centre of Athens (Greece)

The concentrations of trace metals and polycyclic aromatic hydrocarbons (PAHs) adsorbed to total suspended particulate (TSP) and finer fractions of airborne particulate matter (PM) were determined from a site in the centre of Athens (Greece), which is characterized by heavy local traffic and is densely populated, during the winter and summer periods in 2003-2004. Also, we collected and analyzed samples of diesel and gasoline exhaust particles from local vehicles (buses, taxis and private cars) and from chimney exhaust of residential central heating appliances. A seasonal effect was observed for the size distribution of aerosol mass, with a shift to larger fine fractions in winter. The most commonly detected trace metals in the TSP and PM fractions were Fe, Pb, Zn, Cu, Cr, V, Ni and Cd and their concentrations were similar to levels observed in heavily polluted urban areas from local traffic and other anthropogenic emissions. Analysis of 16 PAHs bound to PM showed that they are mostly traffic related. In general, the fine particulate PAHs concentrations were higher than coarse particles. The most common PAHs in PM(10.2) and PM(2.1) were pyrene, phenanthrene, acenapthylene and fluoranthene, which are associated with diesel and gasoline exhaust particles. The results of this study underlined the importance of local emission sources, especially vehicular traffic, central heating and other local anthropogenic emissions. Compared with other big cities, Athens has much higher levels of airborne particles, especially of the finer fractions PM(10) and PM(2.5), correlated with traffic-related air pollution.     

Carbonyl compounds in the urban environment of Athens,Greece

The concentration levels of 15 selected carbonyl compounds in 62 samples were determined at two sites in Athens basin from June to December 2000. Formaldehyde was the most abundant species (0.05-39 microg m(-3)), which comprised from 22% to 37% of the total measured compounds, followed by acetaldehyde (4.32-49 microg m(-3)), acetone/acrolein (0.64-198 microg m(-3)) and butanal (0.79-140 microg m(-3)). The mean formaldehyde/acetaldehyde and acetaldehyde/propanal molar ratios were calculated. No significant seasonal differences were observed for all the carbonyls. Photochemical production was found to weigh upon atmospheric levels for 83-93% in summer days, dropping below 33% in the winter. The importance of formaldehyde and acetaldehyde as a source of hydroxyl radicals in Athens was also assessed.     

Characterization of lead,cadmium, arsenic and nickel in PM(2.5) particles in the Athens atmosphere,Greece

Concentrations of Pb, Cd, As and Ni in PM(2.5) particles were measured in samples collected, using low volume PM(2.5) samplers (Harvard Impactor system, HI) at two sites in Athens basin; Patission Street in Athens city center and Rentis, a semi-urban and industrial area, during March 1995-March 1996. Sample analysis for Pb, Cd, Ni and As was accomplished by electrothermal atomic absorption spectrometry after total digestion. Annual geometric mean values in 183 PM(2.5) particles samples were found to be: Pb: 143 nanogram(-3); Cd: 0.34 nanogram(-3); Ni: 4.55 nanogram(-3); As: 0.79 nanogram(-3). The geographical and temporal distribution patterns were investigated. Pb exhibited higher values during the winter period. For the other elements no significant seasonal variation was observed. Wind direction, air temperature and relative humidity affected element concentrations. Principal component analysis was applied on the data to enable source apportionment of toxic elements in PM(2.5) particles. It was found that Pb, As and Ni have common sources, which could be vehicles emissions/oil combustion and resuspended road dust. Cd and a portion of As originate from industrial activities.     

Numerical simulation of landfill aeration using computational fluid dynamics

The present study is an application of Computational Fluid Dynamics (CFD) to the numerical simulation of landfill aeration systems. Specifically, the CFD algorithms provided by the commercial solver ANSYS Fluent 14.0, combined with an in-house source code developed to modify the main solver, were used. The unsaturated multiphase flow of air and liquid phases and the biochemical processes for aerobic biodegradation of the organic fraction of municipal solid waste were simulated taking into consideration their temporal and spatial evolution, as well as complex effects, such as oxygen mass transfer across phases, unsaturated flow effects (capillary suction and unsaturated hydraulic conductivity), temperature variations due to biochemical processes and environmental correction factors for the applied kinetics (Monod and 1st order kinetics). The developed model results were compared with literature experimental data. Also, pilot scale simulations and sensitivity analysis were implemented. Moreover, simulation results of a hypothetical single aeration well were shown, while its zone of influence was estimated using both the pressure and oxygen distribution. Finally, a case study was simulated for a hypothetical landfill aeration system. Both a static (steadily positive or negative relative pressure with time) and a hybrid (following a square wave pattern of positive and negative values of relative pressure with time) scenarios for the aeration wells were examined. The results showed that the present model is capable of simulating landfill aeration and the obtained results were in good agreement with corresponding previous experimental and numerical investigations.     

Influence of different organic amendments on the degradation, metabolism, and adsorption of terbuthylazine

The behavior of the herbicide terbuthylazine (TA) was studied in a clay loam soil after the addition of different organic amendments (OAs). Addition of poultry compost (PC) and urban sewage sludge (USS) retarded degradation of TA with half-life values of 60.3 and 73.7 d, respectively. In contrast, addition of corn straw (CS) did not significantly alter the degradation of TA (half-life 55.5 d) compared with its degradation in nonamended soils (half-life 57.3 d). Sterilization of amended and nonamended soils resulted in a partial inhibition of TA degradation, indicating that biotic and abiotic processes are involved in TA degradation in soil. Degradation of TA led to the formation of desethyl-terbuthylazine, which was detected in low amounts (<8% of the initially applied TA) in all soils. Adsorption of TA was relatively low, with Kd values ranging from 2.31 L kg(-1) in the nonamended soil to 3.93 L kg(-1) in the soil amended with USS. In general, Kd values increased with increasing soil organic carbon content. The dissolved organic matter extracted from the OAs did not appear to interact with the pesticide or the soil surfaces, suggesting that it would not probably facilitate herbicide transport. Desorption studies indicated a slight hysteresis of TA desorption in the amended soils compared with TA desorption in the nonamended soil, which was entirely reversible. These findings might have practical implications for the environmental fate of TA in agricultural soils, where the studied OAs are commonly used.     

Copper fractionation with dissolved organic matter in natural waters and wastewater--a mixed micelle mediated methodology (cloud point extraction) employing flame atomic absorption spectrometry

A cloud point extraction-preconcentration methodology for the speciation analysis of free and organically complexed metal species in natural waters is presented. The method is based on the neutralization of the electrostatic charge of the humate-metal complexes with a positively charged surfactant in a high ionic strength solution environment. The resulting complexes are conveniently solubilized in the micelles of a non-ionic surfactant medium and are thus separated from the bulk aqueous phase. Free metal species are also determined by complexation with a conventional chelating agent under mild conditions. The overall procedure is easy, rapid and allows for a high sample throughput in terms of massive analysis of many samples in the same time period. The method offers substantially low detection limits of 8.5 and 0.9 micrograms l-1 for bound and labile species respectively, with a calibration curve rectilinear in the wide range 40-150 micrograms l-1 for the humate associated and 4-40 micrograms l-1 for the free metal species. The method is free from interferences yielding recoveries in the range 97-102% for various samples of different matrixes.     

A comprehensive air quality investigation at an aquatic centre: Indoor/outdoor comparisons

Environmental Science and Pollution Research - Air quality and comfort parameters in a naturally ventilated aquatic centre were studied in relation to the outdoor pollution levels. Simultaneous...     

Application of zirconium–iridium permanent modifier for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry

A novel and robust method for the simultaneous determination of lead, cadmium, arsenic, and nickel in atmospheric particulate matter by multi-element electrothermal atomic absorption spectrometry was developed, using zirconium–iridium coating as permanent modifier (140 μg Zr and 4 μg Ir). After 300 atomization cycles, it was necessary to add 2 μg of Ir. Due to the varying concentrations of Pb in atmospheric particulate matter, lead was monitored at two wavelengths, at the less sensitive line of 261.4 nm for high concentration samples (>20 μg?L^?1) or at 283.3 nm for the low concentration samples. Matrix-matched calibration had to be performed for quantitative recoveries (96–102 %). Following this approach, the four elements were determined in atmospheric particulate matter samples from an industrial area near the city of Athens in two different time periods (cold–warm) with limits of detection of 5.5 ng?m^?3 for Pb at 261.4 nm and 0.29 ng?m^?3 at 283.3 nm, 0.019 ng?m^?3 for Cd, 0.14 ng?m^?3 for As, and 0.22 ng?m^?3 for Ni. Lead, Cd, and As levels were very low, whereas Ni content was at comparable levels with other areas worldwide.     

Composition and production rate of dental solid waste in Xanthi, Greece: variability among dentist groups

The objective of this work was to determine the composition and production rate of dental solid waste, produced by dental practices in the Prefecture of Xanthi, a multicultural area in Northeast Greece with a population of 102,000. For the study, 22 private dental practices and 1 public dental practice were selected of the 48 private and 5 public dental practices in operation. The 22 private dental practices included 16 owned by Christian Greek-born dentists, 3 by Moslem dentists and 3 by Christian dentists repatriated from the former Soviet Union. Differentiation on the basis of religion is directly related to the countries from which dentists received their training, e.g., Greece-European Union, Turkey and former Soviet Union. Thus, including the one public dental practice, 4 study groups were considered. Waste collection took place for 22 working days, from 20 May to 27 June 2002. This period was considered to be a representative one for a semi-rural area, such as Xanthi. Dentists were instructed to collect the total amount of waste they produced. A total of 260 kg dental solid waste was collected during the study period and was manually separated. Dental solid waste was classified in three main categories: (1) Infectious and potentially infectious waste, accounting for 94.7% by weight. (2) Non-infectious waste accounting for 2.0%. (3) Domestic-type waste, accounting for 3.3% by weight. The category of infectious waste is classified as hazardous and includes components containing metal (8.51%), components without metal (91.18%) and amalgam (0.33%). Using the weight data, the production rate of dental solid waste for the study period in the Prefecture of Xanthi was determined to be 513 g/practice/day and of infectious and potentially infectious waste 486 g/practice/day. The latter includes the production rate of sharps (9.8 g/practice/day), non-sharps (31.6), infectious waste without metal (443) and amalgam (1.6 g/practice/day). Since dental solid waste is currently disposed of in landfills together with the municipal solid waste, the results of the study were used to suggest an appropriate management scheme. The results were also used to compare the composition and production rates of dental solid waste produced by the 4 study groups.