Volatile hydrocarbons in the atmosphere of Athens,Greece

This work presents the results of one-year monitoring study of Volatile Hydrocarbons, VHCs, in the atmosphere of Athens. It is the first systematic attempt to determine the VHC levels in the Athens' atmosphere with the very well known photochemical pollution problems. The purpose of this work was to create a database concerning VHCs in order to evaluate the photochemical pollution in this area (ozone creation, case studies and meteorology). Totally, 308 samples were collected at three different sites used in the state-monitoring programme involving the criteria pollutants. Air samples were collected on Tenax TA tubes and analysed by thermal desorption and dual column GC dual FID. Fifteen selected compounds were studied; 6 alkanes and 9 benzenoid compounds. The measured values of individual alkanes ranged from 0.39 pg m(-3) to 33 pg m(-3), and those of aromatics from 0.20 pg m(-3) to 616 pg m(-3). The sum of all 15 VHC concentrations ranged between 16 and 1697 pg m(-3). The time and spatial variations in the concentration of these compounds were assessed. Volatile hydrocarbons exhibited a clear seasonal and time cycle, showing higher concentrations during winter and early morning hours. Study of the spatial variations of VHC levels showed higher concentrations at the center of the city. The variation of toluene/benzene ratio and the correlation between VHCs, criteria pollutants (CO, NOx and O3) and meteorological parameters were also assessed. It was demonstrated that a trip-line of the VHCs concentration at the city center doubles the ozone concentration at peripheral areas under favourable meteorological conditions.     

Assessment of toxic metals in waste personal computers

Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in lower levels than the legislative limits.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

Composition and production rate of pharmaceutical and chemical waste from Xanthi General Hospital in Greece

The objective of this work was to determine the composition and production rates of pharmaceutical and chemical waste produced by Xanthi General Hospital in Greece (XGH). This information is important to design and cost management systems for pharmaceutical and chemical waste, for safety and health considerations and for assessing environmental impact. A total of 233 kg pharmaceutical and 110 kg chemical waste was collected, manually separated and weighed over a period of five working weeks. The total production of pharmaceutical waste comprised 3.9% w/w of the total hazardous medical waste produced by the hospital. Total pharmaceutical waste was classified in three categories, vial waste comprising 51.1%, syringe waste with 11.4% and intravenous therapy (IV) waste with 37.5% w/w of the total. Vial pharmaceutical waste only was further classified in six major categories: antibiotics, digestive system drugs, analgesics, hormones, circulatory system drugs and "other". Production data below are presented as average (standard deviation in parenthesis). The unit production rates for total pharmaceutical waste for the hospital were 12.4 (3.90) g/patient/d and 24.6 (7.48) g/bed/d. The respective unit production rates were: (1) for vial waste 6.4 (1.6) g/patient/d and 13 (2.6) g/bed/d, (2) for syringe waste 1.4 (0.4) g/patient/d and 2.8 (0.8) g/bed/d and (3) for IV waste 4.6 (3.0) g/patient/d and 9.2 (5.9) g/bed/d. Total chemical waste was classified in four categories, chemical reagents comprising 18.2%, solvents with 52.3%, dyes and tracers with 18.2% and solid waste with 11.4% w/w of the total. The total production of chemical waste comprised 1.8% w/w of the total hazardous medical waste produced by the hospital. Thus, the sum of pharmaceutical and chemical waste was 5.7% w/w of the total hazardous medical waste produced by the hospital. The unit production rates for total chemical waste for the hospital were 5.8 (2.2) g/patient/d and 1.1 (0.4) g/exam/d. The respective unit production rates were: (1) for reagents 1.7 (2.4) g/patient/d and 0.3 (0.4) g/examination/d, (2) for solvents 248 (127) g/patient/d and 192 (101) g/examination/d, (3) for dyes and tracers 4.7 (1.4) g/patient/d and 2.5 (0.9) g/examination/d and (4) for solid waste 54 (28) g/patient/d and 42 (22) g/examination/d.     

Optimum design of the entrance of a fishpond laterally to the main stream of an open channel

In this study, the optimum design of the entrance of a fishpond laterally to the main flow of an open channel was investigated numerically and experimentally. The flow characteristic measurements were realized with the PIV (particle image velocimetry) method. The mathematical simulations were based on the development of a two dimensional -mean in depthhydrodynamic model and a quasi three dimensional sediment transport model which includes processes of advection, diffusion, and settling of conservative suspended matter. The study was completed with the comparison of the final results of the mathematical models with the findings of the physical model revealing the hydrodynamic interaction and coupling between the main flow of the channel and the lateral reservoir—fishpond and leading to the optimum technical design of the system.     

Nitrogen species in drinking water indicate potential exposure pathway for Balkan Endemic Nephropathy

This study explored two hypotheses relating elevated concentrations of nitrogen species in drinking water and the disease Balkan Endemic Nephropathy (BEN). Drinking water samples were collected from a variety of water supplies in both endemic and non-endemic villages in the Vratza and Montana districts of Bulgaria. The majority of well water samples exceeded US drinking water standards for nitrate + nitrite. No statistically significant difference was observed for any of the nitrogen species between villages classified as endemic and non-endemic. Other constituents (sodium, potassium and chloride) known to be indicators of anthropogenic pollution were also found at elevated concentrations and all followed the order wells > springs > taps. This ordering coincides with the proximity of human influences to the water sources. Our results clearly establish an exposure pathway between anthropogenic activity and drinking water supplies, suggesting that the causative agent for BEN could result from surface contamination.     

Enhanced microbial degradation of cadusafos in soils from potato monoculture: demonstration and characterization

Rapid degradation of cadusafos was evident in soils collected from previously-treated field sites from a potato monoculture area in northern Greece. The slower degradation of cadusafos observed in corresponding antibiotic-treated soils as well as in soils from an adjacent previously-untreated field demonstrated the microbial involvement in the rapid degradation of cadusafos in the soils from the previously-treated sites. Application of the non-specific antibacterial antibiotic chloramphenicol or of the Gram+ bacteria-inhibiting antibiotics penicillin + lyncomycin + vancomycin significantly inhibited the rapid biodegradation of cadusafos suggesting that soil bacteria and probably Gram+ bacteria are mainly responsible for the rapid biodegradation of cadusafos in the specific soil. Further experiments showed that the bacterial population of the cadusafos-adapted soil was also able to rapidly degrade the chemically related nematicide ethoprophos but not fenamiphos and oxamyl. This is the first report of the occurrence of enhanced biodegradation of cadusafos in potato fields. In addition, the finding of cross-enhancement between cadusafos and ethoprophos significantly reduces the number of available chemicals which could be alternated to prevent the development of enhanced biodegradation and thus intensifies the problem in potato monoculture areas like the one in northern Greece.     

Chelating agent-assisted electrokinetic removal of cadmium, lead and copper from contaminated soils

An integrated experimental program was conducted to remove Cd, Pb and Cu from contaminated soil. The chelate agents nitrilotriacetic acid (NTA), diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA) were used as washing solutions under different pH conditions and concentrations. Results showed that the extraction efficiency for Cd in decreasing order was NTA > EGTA > DTPA, while for Pb and Cu it was DTPA > NTA > EGTA. The use of higher chelate concentrations did not necessarily result in greater extraction efficiency. Electrokinetic remediation was applied by conditioning anolyte-catholyte pH to neutral values in order to avoid any potential alterations to the physicochemical soil properties. The removal efficiency for Cd was 65-95%, for Cu 15-60%, but for Pb was less than 20%. The phytotoxicity of the treated soil showed that the soil samples from the anode section were less phytotoxic than the untreated soil, but the phytotoxicity was increased in the samples from the cathode section.