Key parameters and practices controlling pesticide degradation efficiency of biobed substrates

We studied the contribution of each of the components of a compost-based biomixture (BX), commonly used in Europe, on pesticide degradation. The impact of other key parameters including pesticide dose, temperature and repeated applications on the degradation of eight pesticides, applied as a mixture, in a BX and a peat-based biomixture (OBX) was compared and contrasted to their degradation in soil. Incubation studies showed that straw was essential in maintaining a high pesticide degradation capacity of the biomixture, whereas compost, when mixed with soil, retarded pesticide degradation. The highest rates of degradation were shown in the biomixture composed of soil/compost/straw suggesting that all three components are essential for maximum biobed performance. Increasing doses prolonged the persistence of most pesticides with biomixtures showing a higher tolerance to high pesticide dose levels compared to soil. Increasing the incubation temperature from 15 °C to 25 °C resulted in lower t(1/2) values, with biomixtures performing better than soil at the lower temperature. Repeated applications led to a decrease in the degradation rates of most pesticides in all the substrates, with the exception of iprodione and metalaxyl. Overall, our results stress the ability of biomixtures to perform better than soil under unfavorable conditions and extreme pesticide dose levels.     

Monitoring of glyphosate and AMPA in soil samples from two olive cultivation areas in Greece: aspects related to spray operators activities

The persistence of glyphosate and its primary metabolite AMPA (aminomethylphosphonic acid) was monitored in two areas in Southern Greece (Peza, Crete and Chora Trifilias, Peloponnese) with a known history of glyphosate use, and the levels of residues were linked to spray operators’ activities in the respective areas. A total of 170 samples were collected and analysed from both areas during a 3-year monitoring study. A new method (Impact Assessment Procedure - IAP) designed to assess potential impacts to the environment caused by growers’ activities, was utilised in the explanation of the results. The level of residues was compared to the predicted environmental concentrations in soil. The ratio of the measured concentrations to the predicted environmental concentrations (MCs/PECs) was >?1 in Chora the first 2 years of sampling and <?1 in the third year, whilst the MCs/PECs ratio was <?1 in Peza, throughout the whole monitoring period. The compliance to the instructions for best handling practices, which operators received during the monitoring period, was reflected in the amount of residues and the MCs/PECs ratio in the second and especially the third sampling year. Differences in the level of residues between areas as well as sampling sites of the same area were identified. AMPA persisted longer than the parent compound glyphosate in both areas.     

Policy for management of water resources in Greece

The quantities of water are not distributed uniformly in space and time. Greece compared to some other Mediterranean countries is found in advantageous position regarding the availability of water resources. However, there are regions with great in quantity water reserves and others with intense deficiencies. The management of water resources in Greece is concentrated in the systematic spatiotemporal monitoring and forecast of two basic multidimensional parameters, the availability of water resources and the water demand, as well as, in the implementation of necessary measures for the satisfaction of needs, regarding the fields of economy and environment. This work describes and analyses the existing status of water resources in Greece, as well as, the framework of applied policy. Furthermore, measures and actions for the management of water resources are proposed.     

Determination of heavy metals and halogens in plastics from electric and electronic waste

The presence of hazardous substances and preparations in small waste electrical and electronic equipment (sWEEE) found in the residual household waste stream of the city of Dresden, Germany has been investigated. The content of sWEEE plastics in heavy metals and halogens is determined using handheld X-ray fluorescence analysis (HXRF), elemental analysis by means of atomic absorption spectrometry (AAS) and ion exchange chromatography (IEC). Mean value of results for heavy metals in samples (n = 51) by AAS are 17.4 mg/kg for Pb, 5.7 mg/kg for Cd, 8.4 mg/kg for Cr. The mass fraction of an additive as shown by HXRF (n = 161) can vary over a wide range. Precise deductions as regards sWEEE plastics content in hazardous substances and preparations cannot be made. Additional research would be expedient regarding the influence of hazardous substances to recycling processes, in particular regarding the contamination of clean fractions in the exit streams of a WEEE treatment plant. Suitable standards for calibrating HXRF for use on EEE plastics or complex electr(on)ic components do not exist and should be developed.     

Adsorption of Cu(II) ions from aqueous solutions on biochars prepared from agricultural by-products

In this study, the adsorption of Cu(II) from aqueous solutions by agricultural by-products, such as rice husks, olive pomace and orange waste, as well as compost, was evaluated. The aim was to obtain sorbent materials (biochars) through hydrothermal treatment (300?°C) and pyrolysis (300?°C and 600?°C). The effect of adsorbent dose, pH, contact time and initial Cu(II) concentration in batch-mode experiments was investigated. The optimum Cu(II) adsorption conditions was found to occur at 5-12?g/L adsorbent dose, initial pH 5-6, and reaction time 2-4?h. Furthermore, the adsorption kinetics were best described by the pseudo-second order model for all the tested materials, while the adsorption equilibrium best fitted by the linear and Freundlich isotherms. Comparing rice husks and olive pomace, the higher adsorption capacity resulted after pyrolysis at 300?°C. With respect to the orange waste and compost, the highest adsorption capacity was observed using biochars obtained after hydrothermal treatment and pyrolysis at 300?°C.     

Technology selection for infectious medical waste treatment using the analytic hierarchy process

The overall objective of this paper was to evaluate five different technologies used for infectious medical waste treatment and select the optimum one by means of multicriteria analysis. Steam disinfection was selected as the optimum treatment technology, among others using incineration, microwave disinfection, chemical disinfection with sodium hypochlorite, and reverse polymerization with microwaves. The evaluation was based on four groups of criteria, specifically, environmental, economic, technical, and social criteria, using the analytic hierarchy process. Selection among four commercial systems using steam disinfection was not possible, because it required additional site-specific criteria, e.g., loading capacity and requirements of local regulations.

Implications: The paper can help health care facilities to select the system for infectious waste treatment that best fits their needs. It was concluded that steam disinfection was the optimum technology, using environmental, economic, technical, and social criteria.     

Climate change impacts on critical international transportation assets of Caribbean Small Island Developing States (SIDS): the case of Jamaica and Saint Lucia

This contribution presents an assessment of the potential vulnerabilities to climate variability and change (CV & C) of the critical transportation infrastructure of Caribbean Small Island Developing States (SIDS). It focuses on potential operational disruptions and coastal inundation forced by CV & C on four coastal international airports and four seaports in Jamaica and Saint Lucia which are critical facilitators of international connectivity and socioeconomic development. Impact assessments have been carried out under climatic conditions forced by a 1.5 °C specific warming level (SWL) above pre-industrial levels, as well as for different emission scenarios and time periods in the twenty-first century. Disruptions and increasing costs due to, e.g., more frequent exceedance of high temperature thresholds that could impede transport operations are predicted, even under the 1.5 °C SWL, advocated by the Alliance of Small Island States (AOSIS) and reflected as an aspirational goal in the Paris Climate Agreement. Dynamic modeling of the coastal inundation under different return periods of projected extreme sea levels (ESLs) indicates that the examined airports and seaports will face increasing coastal inundation during the century. Inundation is projected for the airport runways of some of the examined international airports and most of the seaports, even from the 100-year extreme sea level under 1.5 °C SWL. In the absence of effective technical adaptation measures, both operational disruptions and coastal inundation are projected to increasingly affect all examined assets over the course of the century.     

Monitoring operational and leachate characteristics of an aerobic simulated landfill bioreactor

Long-term biodegradation of MSW in an aerobic landfill bioreactor was monitored as a function of time during 510 days of operation. Operational characteristics such as air importation, temperature and leachate recirculation were monitored. The oxygen utilization rates and biodegradation of organic matter rates showed that aerobic biodegradation was feasible and appropriate to proceed in aerobic landfill bioreactor. Leachate analyses showed that the aerobic bioreactor could remove above 90% of chemical oxygen demand (COD) and close to 100% of biochemical oxygen demand (BOD5) from leachate. Ammonium (NH4+), nitrate (NO3-) and sulphate (SO4(2-)) concentrations of leachate samples were regularly measured. Results suggest that nitrification and denitrification occurred simultaneously, and the increase in nitrate did not reach the levels predicted stoichiometrically, suggesting that other processes were occurring. Leachate recirculation reduced the concentrations of heavy metals because of the effect of the high pH of the leachate, causing heavy metals to be retained by processes such as sorption on MSW, carbonate precipitation, and hydroxide precipitation. Furthermore, the compost derived from the aerobic biodegradation of the organic matter of MSW may be considered as soil improvement in the agricultural plant production. Bio-essays indicated that the ecotoxicity of leachate from the aerobic bioreactor was not toxic at the end of the experiment. Finally, after 510 days of degradation, waste settlement reached 26% mainly due to the compost of the organic matter.     

Transport of cadmium and assessment of phytotoxicity after electrokinetic remediation

The use of ethylene diamine tetraacetic acid (EDTA) on the electrokinetic removal of cadmium-contaminated soil was evaluated. A total of four different tests were conducted using EDTA as a washing solution as well as a purging solution at the electrode compartments. The efficiency of electrokinetic extraction was significantly influenced by the pH of the soil medium. The results show that EDTA was effective in desorbing cadmium at a high pH, with Cd-EDTA(-) anion complexes migrating toward the anode. At low pH values near the anode area, cadmium existed as Cd(2+), migrating toward the cathode. Such contradicting directions of cadmium have resulted in its detrimental removal from the soil cell. However, accumulation of cadmium near the cathode was observed at the end of the tests due to the dominating low pH in the soil cell. The phytotoxicity after the electrokinetic process was investigated using Sorghum saccharatum, Lepidium sativum and Sinapis alba plants. The germination index was a major endpoint estimated by measuring seed germination and shoot elongation. The results obtained show that the phytotoxicity was increased after electrokinetic extraction. Despite, the extensive cadmium removal from two-thirds of the cell, the low pH of the soil was the principal parameter exhibiting the phytotoxicity.     

Soil Erosion Potential after Fire and Rehabilitation Treatments in Greece

Wildland fires are one of the more severe disturbances for natural ecosystems in the Mediterranean basin and can become a critical factor in the process of soil erosion. A quantitative assessment of soil erosion is needed in order to form an assessment on the extent and magnitude of post-fire soil erosion potential and to assess the effectiveness of the rehabilitation treatment. On 21 August 2006, a large wildland fire occurred in the Kassandra Peninsula in northern Greece, which burned one fifth of the Peninsula. After the fire, in order to protect the soil against erosion, the Forest Services applied a hillslope rehabilitation treatment of contour-felled logs and branch piles. In this paper, we report quantitative estimation of the wildland fire and erosion control treatment on soil erosion potential. The coupling of the Universal Soil Loss Equation and the Geographical Information Systems was implemented and the erosion potential was found to be 2.8 t/ha/year pre-fire, 29.5 t/ha/year post-fire, and 21.3 t/ha/year after rehabilitation treatment. The model can successfully contribute in the planning of the rehabilitation treatment but it cannot be used in the quantification of the soil loss after the application of the erosion control measures. The comparisons between the results of the three cases indicate the importance of the immediate erosion control measures in order to mitigate soil loss and restore the natural environment.