Occupational Exposure to Polycyclic Aromatic Hydrocarbons During Diesel Combustion

Identification and determination of polycyclic aromatic hydrocarbons (PAHs) in Diesel exhaust in the working environment and assessment of workers’ occupational exposure to these suspected human carcinogens were the aim of this experimental investigation.

The range of exposure factors calculated on the basis of 9 individual PAH concentrations determined in personal air samples shows that time-averaged concentration of these compounds did not exceed the Polish Maximum Admissible Concentration (MAC) value for PAHs, that is, 2 μg·m^–3. The highest concentrations of PAHs were determined in the breathing zone of forklift operators. The maximum exposure factor was 0.427 μg·m^–3 (about 1/4 of MAC).     

Flicker Test as a Load Measurement During the Combined Effect of Heat and Noise

This study was a joint physiological and psychological experiment undertaken to determine changes in physiological and psychological human functions under the combined influence of heat, noise, and physical activity. Seven experimental situations were simulated in a climatic chamber with different configurations of three independent variables: heat (40 °C), noise (98 dB), and physical effort (30% of maximum volume of oxygen uptake—V0₂ max). Five psychological variables (critical flicker fusion—CFF, hand tremor, reaction time, subjective climate evaluation, and subjective evaluation of the given condition load) and two physiological variables (heart rate and rectal temperature) were monitored. Results indicate that CFF changed (increased) significantly when more than one experimental variable was applied. These changes coincided with significant changes in both subjective climate evaluation and subjective evaluation of a given condition load. There were no significant changes in psychomotor functions (hand tremor and reaction time). None of the observed physiological parameters were above the critical value. The results suggest that CFF can be treated as a psychophysical load indicator.     

Novel Tough Crystalline Blends of Polylactide with Ethylene Glycol Derivative of POSS

Blending of polylactide (PLA) with low stereoregularity and polyhedral oligomeric silsesquioxane grafted with arms of poly(ethylene glycol) methyl ether, acting as a plasticizer, allowed us previously to obtain a novel stable elastomeric-like material. The present contribution focuses on the properties of semi-crystalline PLA plasticized with this compound. Melt blends of PLA with 5–15 wt% of the plasticizer, were compression molded, quenched and annealed, which enabled cold-crystallization. The glass transition temperature of the blends and their drawability depended on their crystallinity and plasticizer content. The best ductility was reached at the plasticizer content of 15 wt%; the achieved strain at break was 6.5 (650%) and 1.3 (130%), for the quenched and annealed material, respectively. The latter value exceeded 20 times the strain at break of neat crystalline PLA. The tensile toughness of the annealed 15 wt% blend was 12 times larger than that of crystalline PLA. Moreover, annealing of 15 wt% blend improved its yield strength by 40%. Despite the two peaks of the loss modulus, indicating the two glass transitions in this blend, no heterogeneities were found by scanning electron microscopy, indicating that the plasticizer enriched phase formed instead of distinct inclusions of the plasticizer.     

Response of mosses to the heavy metal deposition in Poland--an overview

Concentrations of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) in Pleurozium schreberi (Brid.) Mitt., a common moss species, were used to indicate relative levels of atmospheric deposition in Poland in the years 1975-1998. Spatial and temporal differences in the heavy metal concentrations in mosses were found. The highest concentration of heavy metals was recorded in the moss samples from the southern, most industrialised part of the country, and the lowest from north-eastern Poland. A significant decrease of heavy metals over 20 years (1975-1998) was found.     

Characterisation of particulate exposure during fireworks displays

Little is known about the level and content of exposure to fine particles (PM_2.5) among persons who attend fireworks displays and those who live nearby. An evaluation of the levels of PM_2.5 and their elemental content was carried out during the nine launches of the 2007 Montréal International Fireworks Competition. For each event, a prediction of the location of the firework plume was obtained from the Canadian Meteorological Centre (CMC) of the Meteorological Service of Canada. PM_2.5 was measured continuously with a photometer (Sidepak?, TSI) within the predicted plume location (“predicted sites”), and integrated samples were collected using portable personal samplers. An additional sampler was located on a nearby roof (“fixed site”). The elemental composition of the collected PM_2.5 samples from the “predicted sites” was determined using both a non-destructive energy dispersive ED-XRF method and an ICP-MS method with a near-total microwave-assisted acid digestion. The elemental composition of the “fixed site” samples was determined by the ICP-MS with the near-total digestion method. The highest PM_2.5 levels reached nearly 10 000 μg m^?3, roughly 1000 times background levels. Elements such as K, Cl, Al, Mg and Ti were markedly higher in plume-exposed filters. This study shows that 1) persons in the plume and in close proximity to the launch site may be exposed to extremely high levels of PM_2.5 for the duration of the display and, 2) that the plume contains specific elements for which little is known of their acute cardio-respiratory toxicity.     

Analysis of Total Work Inability in Poland in 2000 and 2001 According to Age,Disease Diagnosis and Occupation

This study was to determine the main health-related reasons, age and occupation of those who took ear retirement due to total work inability. This was done through an analysis of the data from Poland’s Soci Insurance Institution (ZUS) from 2000 and 2001. An analysis of these data showed an increase in the numb of certificates confirming total inability to work in people over 40 years old. Over 50% of certificates wo, were issued to workers in 2 age-groups: 45–49 and 50–54.

Diseases of the circulatory system, musculoskeletal system and connective tissue as well as mental and behavioural disorders are the main causes of early inability to work. Approximately 70% of people who obtained certificates confirming total inability to work had blue- and blue-and-white-collar jobs.     

Proposal of new convenient extractant for assessing phytoavailability of heavy metals in contaminated sandy soil

Environmental Science and Pollution Research - The aim of the study was to compare the usefulness of 1 M HCl with aqua regia, EDTA, and CaCl2 for the extraction of phytoavailable forms of...     

Assessment of soils contamination with veterinary antibiotic residues in Northern Poland using developed MAE-SPE-LC/MS/MS methods

Among the wide range of compounds reaching the soil are the veterinary antimicrobials. Since no regulations regarding acceptable levels of drug concentrations in the environment exist, monitoring tests, particularly concerning soils, are carried out very rarely. This study presents a preliminary assessment of the contamination of agricultural soils in Northern Poland with seven antimicrobial veterinary medicines which has never been carried out before. Veterinary drugs were detected in 54% of the examined soil samples; the most commonly detected drugs were sulfonamides and trimethoprim. The highest indicated concentrations refer to enrofloxacin (57.0 μg kg^?1) and trimethoprim (47.8 μg kg^?1). The presence of these target drugs in the soil environment confirms the need for further monitoring studies. The analytical methods developed in this study are an excellent tool to achieve this goal and allow an estimation of the risk connected with the presence of veterinary antimicrobials in soils.

     

The monitoring of cadmium,zinc and copper in the kidneys and liver of humans deceased in the region of Cracow (Poland)

Cadmium, zinc and copper levels were determined in the renal cortex and liver of 60 inhabitants of Cracow, Poland. Cadmium levels in the renal cortex were contained in broad limits of 5–176 g/g, mean 50.6 g/g (wet weight). Maximum levels were found in the age group of about 50–60 years. The levels were slightly higher in men (53 g/g) than in women (45 g/g), with no effect of location within the region. The levels in smokers (62 g/g) were much higher than in non-smokers (32 g/g). The above relations were less pronounced for cadmium levels in the liver. Whole body retention of cadmium followed the pattern of cadmium in renal cortex. The level of zinc in renal cortex reflected those of cadmium. A significant proportion of the population (54% in smokers, 9% in non-smokers) showed cadmium levels in renal cortex exceeding the reference level of 50 g/g recently accepted for general population. In the view of the authors the exposure to cadmium of the population of Cracow is excessive and calls for attention.The study was performed under a KBN grant No 40106 91 01.     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.