Comparison of trace metal bioavailabilities in European coastal waters using mussels from Mytilus edulis complex as biomonitors

Mussels from Mytilus edulis complex were used as biomonitors of the trace metals Fe, Mn, Pb, Zn, and Cu at 17 sampling sites to assess the relative bioavailability of metals in coastal waters around the European continent. Because accumulated metal concentrations in a given area can differ temporally, data were corrected for the effect of season before large-scale spatial comparisons were made. The highest concentration of Fe was noted in the North Sea and of Mn in the Baltic. Increased tissue concentrations of Pb were recorded in the mussels from the Bay of Biscay and the Baltic Sea. Low concentrations of metals were determined in the mussels from the Mediterranean Sea and the Northern Baltic. Relatively low geographic variations of Cu and Zn indicate that mussels are able to partially regulate accumulated body concentrations, which means Cu and Zn are, to some extent, independent of environmental concentrations.     

Development and application of microwave assisted extraction (MAE) for the extraction of five polycyclic aromatic hydrocarbons in sediment samples in Johannesburg area, South Africa

A microwave-assisted extraction (MAE) method was verified and applied for the extraction of polycyclic aromatic hydrocarbons (PAHs) in sediment samples. Soxhlet extraction was used as the reference method. The optimum MAE was carried out with 20 mL of hexane/acetone (1:1, v/v) mixture in a 1-g sample at 250 W for 20 min. Soxhlet extraction was carried out with 250 mL of dichloromethane:hexane (1:1, v/v) mixture in a 15-g sample for 24 h in a water bath maintained at 60 °C. The collected extracts were both cleaned up, reduced to 1 mL under nitrogen and then injected into an HPLC fluorescence. To increase the sample throughput, simultaneous MAE was performed. The obtained percentage recoveries ranged from 61 to 93 and 88–98 for MAE and SE, respectively. The optimised MAE method was validated using certified reference material. It was then applied to real sediment samples from in and around the greater Johannesburg area. The sediments from Jukskei River were found to be the most polluted while Hartbeespoort Dam sediments were found to be least polluted. The overall order of concentrations for the studied PAHs per site was as follows: Jukskei River?>?Kempton Park?>?Centurion Dams?>?Natalspruit River (PIT)?>?Hartbeespoort Dam.     

Potential resources of post-consumer wood waste in Poland

Journal of Material Cycles and Waste Management - This article presents the results of studies, whose aim was to determine the volume of post-consumer wood waste resources in Poland and propose a...     

Cyanides in the environment—analysis—problems and challenges

Cyanide toxicity and their environmental impact are well known. Nevertheless, they are still used in the mining, galvanic and chemical industries. As a result of industrial activities, cyanides are released in various forms to all elements of the environment. In a natural environment, cyanide exists as cyanogenic glycosides in plants seeds. Too much consumption can cause unpleasant side effects. However, environmental tobacco smoke (ETS) is the most common source of cyanide. Live organisms have the ability to convert cyanide into less toxic compounds excreted with physiological fluids. The aim of this paper is to review the current state of knowledge on the behaviour of cyanide in the environment and its impact on the health and human life.     

Windsor, Ontario exposure assessment study: design and methods validation of personal, indoor, and outdoor air pollution monitoring

The Windsor, Ontario Exposure Assessment Study evaluated the contribution of ambient air pollutants to personal and indoor exposures of adults and asthmatic children living in Windsor, Ontario, Canada. In addition, the role of personal, indoor, and outdoor air pollution exposures upon asthmatic children's respiratory health was assessed. Several active and passive sampling methods were applied, or adapted, for personal, indoor, and outdoor residential monitoring of nitrogen dioxide, volatile organic compounds, particulate matter (PM; PM-2.5 pm [PM2.5] and < or =10 microm [PM10] in aerodynamic diameter), elemental carbon, ultrafine particles, ozone, air exchange rates, allergens in settled dust, and particulate-associated metals. Participants completed five consecutive days of monitoring during the winter and summer of 2005 and 2006. During 2006, in addition to undertaking the air pollution measurements, asthmatic children completed respiratory health measurements (including peak flow meter tests and exhaled breath condensate) and tracked respiratory symptoms in a diary. Extensive quality assurance and quality control steps were implemented, including the collocation of instruments at the National Air Pollution Surveillance site operated by Environment Canada and at the Michigan Department of Environmental Quality site in Allen Park, Detroit, MI. During field sampling, duplicate and blank samples were also completed and these data are reported. In total, 50 adults and 51 asthmatic children were recruited to participate, resulting in 922 participant days of data. When comparing the methods used in the study with standard reference methods, field blanks were low and bias was acceptable, with most methods being within 20% of reference methods. Duplicates were typically within less than 10% of each other, indicating that study results can be used with confidence. This paper covers study design, recruitment, methodology, time activity diary, surveys, and quality assurance and control results for the different methods used.     

Effect of humic substances on the Fenton treatment of wastewater at acidic and neutral pH

This paper describes results of treatability studies of the effect of humic substances (humate, HS, at the concentration 500-5000 mg l-1) on the Fenton (Fe2+/H2O2) treatment of industrial wastewater at pH 3.5 and 7.0. Without humate, the removal of all contaminants was significantly higher at pH 3.5 than at pH 7. At pH 7.0, the removal of all compounds in the presence of HS (3000 mg l-1) was comparable to that at pH 3.5 without HS. At pH 3.5, humate had no effect on the removal of arsenic, thiocyanate and cyanide, but the removal of all organic compounds (phenol, 2,4-dimethylphenol, benzene, toluene, o-xylene, m- & p-xylene and dichloromethane) was significantly inhibited. Mechanisms of the processes are discussed. It is suggested that, in the presence of HS, acidification of the treated wastewater may not only be unnecessary but it can even hinder the degradation of organic pollutants.     

Dissipation of difenoconazole in apples used for production of baby food

Dissipation of fungicide difenoconazole (3-chloro-4-[(2RS,4RS;2RS,4SR)-4-methyl-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-2-yl]phenyl 4-chlorophenyl ether) was studied following its application on apples intended for production of baby food. The apples (varieties: Jonagold Decosta, Gala and Idared) were sprayed with the formulation to control pathogens causing fungal diseases: powdery mildew (Podosphaera leucotricha ELL et Ev./Salm.) and apple scab (Venturia inaequalis Cooke/Aderh.). A validated gas chromatography-based method with simultaneous electron capture and nitrogen phosphorus detection (GC-ECD/NPD) was used for the residue analysis. The analytical performance of the method was highly satisfactory, with expanded uncertainties ≤ 19% (a coverage factor, k = 2, and a confidence level of 95%). The dissipation of difenoconazole was studied in pseudo-first-order kinetic models (for which the coefficients of determination, R², ranged between 0.880 and 0.977). The half-life of difenoconazole was 12–21 days in experiments conducted on three apple varieties. In these experiments, the initial residue levels declined gradually and reached the level of 0.01 mg kg^?1 in 50–79 days. For the residue levels to remain below 0.01 mg kg^?1 (the maximum acceptable concentration for baby foods), difenoconazole must be applied approximately 3 months before harvest, at a dose of 0.2 L ha^?1 (50 g of an active ingredient per ha).     

Adaptation strategies and referencing trial of Scots and black pine populations subjected to heavy metal pollution

The impact of industrial heavy metal pollution on Scots pine (Pinus sylvestris L.) and black pine (Pinus nigra Arn.) populations was investigated. Sampled pine stands, which were located in Upper Silesia (southern Poland) in an area strongly polluted by heavy metals, consisted of resistant and sensitive trees. To evaluate the adaptation process, genetic structure and diversity was tested using isozyme analysis. Higher levels of Zn, Pb, Cd and Cu were detected in needles of sensitive trees compared with resistant ones. With respect to morphology, Scots pines were more distinctly impaired than black pines. Although black pines had lower heavy metal concentrations, levels in 1-year-old needles, other than Cu, significantly exceeded “reference plant” values (Markert 1994). In both species, resistant trees demonstrated a lower degree of genetic variation than metal-sensitive trees with respect to some enzyme loci (SHDH A, PGI, PGM, MDH C and DIA). This observation was corroborated in sensitive trees by the smaller number of identified alleles and alleles per locus, absence of private alleles and significant excess of homozygotes in relation to expected Hardy–Weinberg equilibrium values. Assuming that only resistant trees of both species survive under conditions of prolonged soil contamination, the observed genetic structure implies that remaining populations will be depleted of some alleles of unknown adaptive value to future selection pressures. Genetic changes induced by heavy metals suggest an important role for specific enzymes—FEST, SHDH A and B, GOT B and PGI—in the adaptation process. Our results may serve as a basis for selection and propagation of individuals appropriate for re-cultivation of areas chemically degraded by industrial activity.     

Comparison of different modifications on QuEChERS sample preparation method for PAHs determination in black, green, red and white tea

The aim of this work was the evaluation of QuEChERS extraction method for polycyclic aromatic hydrocarbon (PAH) determination in various types of tea. In the experiment, different kinds of extraction solvents, sorbents and a final method of sample preparation were compared. The final extracts were analysed by gas chromatography-selected ion monitoring-mass spectrometry. The results suggest that acetonitrile extraction, clean up with SAX and final liquid–liquid extraction was the best combination giving the most purified extracts and acceptable compound recoveries for different types of teas. In the study of real samples, compounds belonging to light PAHs were mostly detected, and heavy polycyclic aromatic hydrocarbons, including benzo[a]pyrene, were not identified in any of samples.     

Can we enhance amphibians’ habitat restoration in the post-mining areas?

The study was aimed to evaluate the selected improvements of nature restoration in a depleted gravel pit. The study site consisted of four water reservoirs of different shapes and sizes, flooded after the gravel extraction ended. Ecological succession monitoring, conducted by the Warsaw University of Life Sciences students associated in the Student Scientific Association of Animal Sciences Faculty since the completion of mining, have focused on amphibians. A twofold approach upheld amphibian species population dynamics, as well as selected habitat elements. The restoration practices dedicated to habitat conditions enhancing have been proved to be definitely effective and useful for similar sites.