The aim of the study was to define the occurrence of human noroviruses of genogroup I and II (NoV GI and NoV GII) and hepatitis A virus (HAV) in the Baltic Sea mussels. The shellfish samples were taken at the sampling sites located on the Polish coast. In total, 120 shellfish were tested as pooled samples using RT-PCR and hybridisation with virus specific probes. NoV GI was detected in 22 (18.3 %), NoV GII in 28 (23.3 %), and HAV in 9 (7.5 %) of the shellfish. The nucleotide sequence analysis of the detected NoV GII strains showed a 97.3–99.3 % similarity to GII.4 virus strain. This is the first report describing the NoV and HAV occurrence in wild Baltic mussels and their possible role as bioindicators of seawater contamination with human enteric viruses. 相似文献
Magnetic ion-imprinted polymers (IIPs) were prepared by precipitate polymerization and leached with HCl to remove uranium. Their ability to remove hexavalent uranium from wastewater effluents was studied. Batch adsorption studies to determine the optimum conditions of U(VI) removal were conducted at different levels of sample pH, sorbent amount, agitation time, and initial uranium concentration. It was observed that, under optimum conditions (i.e. pH 4, adsorbent amount of 50 mg, 45 min agitation time, and initial U(VI) concentration of 2 mg L?1), the maximum removal of U(VI) cations was >98% and 80% for the magnetic IIP and the corresponding magnetic non-imprinted polymers (NIP), respectively. Langmuir and Freundlich isotherms were used to describe the adsorption of U(VI) onto magnetic IIP and NIP. The adsorption capacity of U(VI) was determined to be 1.06 and 0.85 mg g?1 for the two isotherms, respectively. The order of selectivity was found to be U(VI) > Fe(III) > Pb(II). For six cycles of regeneration and reuse, the magnetic polymers maintained their stabilities with only a 4% loss in the extraction efficiency. The average extraction efficiencies of the magnetic polymers for the spiked acid mine drainage and sewage wastewater effluents were 71% and 58% for the magnetic IIP and NIP, respectively. From powder X-ray diffraction analysis, application of the Scherrer equation yielded magnetic nanoparticles of an average mean diameter of 11.9 nm. Thermo-gravimetric analysis revealed that the HCl-leached magnetic polymers had a magnetite residual weight of 5%. 相似文献
In this work it was shown that polymers can be recycled into a promising adsorbent for organic dyes and phenols waste removal. For this, a series of activated carbons (ACs) were produced from mixture of ferrocene or titanium acetylacetonate with poly(furfuryl alcohol) (PFA) by steam activation. The introduction of ferrocene as Fe precursor was found to be an efficient catalyst in mesoporosity development during carbonization and subsequent steam activation at 850 °C, whereas the polymer based only and titanium-doped ACs are typically microporous. The porous structure parameters were determined from nitrogen adsorption isotherms measured at 77 K. Scanning electron microscopy was applied to monitor the metal distribution of metal-loaded char and the surface morphology of activated carbons. The adsorption capacity was found to be dependent mainly on pore size distribution. In the case of phenol adsorption, the adsorption was defined by volume of pore with size 0.8–1.4 nm; whereas, for Congo red best fit was observed for volume of pore with size 2–5 nm.
The use of surfactants in a bioremediation process is aimed at increasing the efficiency of the removal of hydrophobic contaminants from the environment. The subjects of the study were three alkyl polyglucosides (APGs) of different alkyl chain length: Glucopon 215 CS UP, Glucopon 600 CS UP, and Glucopon 650 EC. The impact of these surfactants on the surface properties of the test strain Pseudomonas fluorescens ATCC 14700, as well as on the biodegradation of diesel was tested. It was observed, that the length of alkyl chain has an influence on the cell surface properties. The modification of the cell surface hydrophobicity and the electrokinetic potential on the bacteria cells is dependent on the structure of Glucopon molecules. The elongation of alkyl chains in surfactant molecule caused an increase of the hydrophobic properties and a reduction of the electrokinetic potential on the bacteria cells. Moreover, the use of APGs below critical micelle concentration caused an increase of diesel oil biodegradation, especially in the case of Glucopons with longer alkyl chain (Glucopon 600 CS UP and 650 EC). The better diesel oil removal by tested strain after surfactant addition was correlated with the hydrophobic properties of bacteria strain. 相似文献
The article describes the influence of wood preservatives on water bioceonosis. The “battery” of toxicology tests was used to cover luminescent bacteria test, algae growth inhibition test, crustacean and fish lethal tests. The test samples used were pure wood preservative and water after the wood preservative leaching from wood sample. It was observed that the wood preservative is leaching from the wood sample in 10% within 1 month of exposition. Achieved results indicate the necessity of toxic assessment of wood preservative after wood element protection. 相似文献
ABSTRACT: The transmission of disease in ground water is a topic of great concern to government agencies, ground water specialists, and the general public. The purpose of this study was to compare the temporal variability in storm flow of fecal coliform bacteria densities and Cryptosporidium parvum oocyst densities in agriculturally impacted karst ground water. Cryptosporidium parvum oocyst densities ranged from 0 to 1,050 oocysts/1, and mean storm densities ranged from 3.5 to 156.8 oocysts/1. Fecal coliform densities ranged from less than 1 CFU/100ml to more than 40,000 CFU/100ml, and geometric mean storm densities ranged from 1.7 CFU/100ml to more than 7,000 CFU/100ml. Fecal coliform densities correlated well with flow during storms, but Cryptosporidium oocyst densities exhibited a great deal of sample to sample variability and were not correlated with flow. Fecal coliform densities did not correlate positively with Cryptosporidium oocyst densities. Fecal coliform densities were greatest at storm peaks, when sediment loads were also greatest. Multiple transport mechanisms for fecal coliform bacteria and C. parvum oocysts may necessitate various agricultural land management and livestock health maintenance practices to control movement of pathogens to karst ground water. 相似文献
BACKGROUND: The purpose was to study the test-retest reliability and internal consistency of questions in a questionnaire concerning working conditions and health and the inter-rater reliability of observations and measurements according to an ergonomic checklist. METHOD: Fifty-seven operators participated in a retest questionnaire and 58 operators participated in an inter-observer test. RESULTS: The questions had fair to good or higher reliability in 142 of the total of 312. Twenty-seven of the total of 44 variables in the ergonomic checklist were classified as having fair to good or higher reliability. CONCLUSIONS: About half of the questions had fair to good or higher reliability and can be recommended for further analyses. The majority of variables in the ergonomic checklist were classified as having fair to good or higher reliability. Low reliability does not necessarily indicate that the reliability of the test, per se, is low but may signify that the conditions measured vary over time or that the answers are aggregated in one part of the scale. 相似文献
Converting raw biomass into valuable products protects the environment, improves economics, and helps tackle climate change by cutting resource demand and waste production. Thermochemical treatment is a common method for producing biochars, hydrochars and torreficates from biomass and organic wastes, which can also generate dioxins and furans and consequently limit the use of thermochemically converted chars. Here we review the presence of dioxins and furans in chars produced by hydrothermal carbonization, torrefaction, and pyrolysis processes under the influence of temperature, residence time, heating rate, pressure, and feedstock type. Dioxins and furans were mostly below 20 ng total toxic equivalence per kilogram (TEQ kg−1), with the highest level of 113 ng TEQ kg−1 found in over 100 samples of different char types. The most toxic products were hydrochars produced from sewage sludge. Processing temperature and feedstock type were key factors resulting in high dioxin levels in chars, and care should be taken when producing chars at temperatures up to 300 °C or using feedstocks previously contaminated with dioxins or preservatives.
Environmental Science and Pollution Research - The aim of this study was to analyze the occurrence of sulfonamide resistance genes (sul1–3) and other genetic elements as antiseptic resistance... 相似文献