Catalytic destruction of chloramine to nitrogen using chlorination and activated carbon--case study.

The paper presents the results of laboratory and pilot studies on the removal of chloramine from potable water using chlorination with a less-than-breakpoint dosage of chlorine, followed by treatment with catalytic activated carbon. The effect of the chlorine-to-nitrogen ratio, temperature, and carbon contact time were investigated to optimize conditions for chloramines removal and minimize the production of ammonia. Results demonstrated that prechlorination of water, followed by treatment with catalytic activated carbon, can degrade monochloramine to nitrogen gas as a main product. For all chlorine-to-ammonia ratios studied, the observed rates of monochloramine removal were higher at a temperature of 20 degrees C than they were at 5 degrees C. Generation of ammonia was slightly higher at the lower temperature. However, at both temperatures, practically all monochloramine was destroyed, and only insignificant amounts of ammonia were formed when a chlorine-to-ammonia ratio of 7:1 was applied. The described method is simple and cost-effective, because it eliminates the requirement of removal of ammonia, typically formed during the treatment of chloramines with activated carbon.     

Cadmium effect on the structure of supra- and subpharyngeal ganglia and the neurosecretory processes in earthworm Dendrobaena veneta (Rosa)

Cadmium effects on the supra- and subpharyngeal ganglia, neurosecretion and RNA content in the neurosecretory cells were tested in earthworms Dendrobaena veneta exposed to 10 and 50 mg Cd kg(-1) in soil after 20 days of the experiment. Accumulation of cadmium in the ganglia of nervous system was also measured using AAS method. Cadmium was accumulated in the nervous system. The accumulated amount was proportional to Cd soil concentration and the exposure time. A considerable fall in neurosecretion and RNA content in the neurosecretory cells and neurosecretion in the neuropile (the axons) of both tested ganglia was induced by 50 mg Cd kg(-1). It seemed that neurosecretion synthesis and its axonal transport could be suppressed. Cadmium caused degenerative changes as vacuolization of the neurosecretory cells and neuropile in both tested ganglia.     

Ammoniacal leaching and recovery of copper from alloyed low-grade e-waste

The paper concerns a hydrometallurgical method for selective recovery of copper from low-grade electric and electronic wastes. The following consecutive stages were proposed: smelting of the scraps to produce Cu–Zn–Ag alloy, leaching of the alloy in ammoniacal solution, and selective copper electrowinning. Cu–Zn–Ag alloy was a polymetallic and five-phase system. It was leached in chloride, carbonate, sulfate and thiosulfate solutions. This resulted in the separation of the metals, wherein metallic tin and silver as well as lead salts remained in the slimes, while copper and zinc were transferred to the electrolyte. Copper was selectively recovered from the ammoniacal solutions by the electrolysis, leaving zinc ions in the electrolyte. The best conditions of the alloy treatment were obtained in the ammonia–carbonate system, where the final product was copper of high purity (99.9 %) at the current efficiency of 60 %. Thiosulfate solution was not applicable for the leaching of the copper alloy due to secondary reactions of the formation of copper(I) thiosulfate complexes and precipitation of copper(I) sulfide, both inhibiting dissolution of the metallic material.     

Spent sulfuric acid plant catalyst: valuable resource of vanadium or risky residue? Process comparison for environmental implications

Environmental Science and Pollution Research - The enormous amount of spent catalysts generated worldwide may pose a risk to the environment because of their high load of metals, including...     

The conceptual model of an eco-industrial park based upon ecological relationships

The necessity to follow the rules of sustainable development in the everyday industrial practice has led to the formulation of the concept of an industrial ecosystem mimicking the natural ecosystem. Following this analogy, the conceptual model of an eco-industrial park, which is an organised form of the industrial ecosystem, was presented in this paper. The model comprises of (1) the structure of the ecosystem, (2) the classification of the enterprises as producers, consumers and decomposers, (3) mass and energy flows and (4) types of interactions. The classification of the enterprises introduced here as well as the analysis of mass and energy flows indicates that the diversity of the enterprises in eco-industrial parks is desired. Furthermore, the minimal condition to create the symbiotic relationships between the enterprises is established, claiming that at least one industrial producer or decomposer must be involved in the eco-industrial park. The application of this model will facilitate the design and development of eco-industrial parks and enable the identification of symbiotic relationships between the entities of such a park and other types of industrial ecosystems. In order to show the applicability of the proposed model and its potential for the practical implementation two case studies are presented.     

Discrete and time-integrated sampling for chromium load calculations in a watershed with an impoundment reservoir at an exceptionally low water level

Instantaneous (discrete) and time-integrated (composed) samples were collected during a 19-week period in a watershed impacted by discontinuous discharges from local tanneries (Carpathians Mountains, Poland). Existence of the impoundment reservoir in this watershed allowed investigation of its role in chromium transport. In collected samples, dissolved and particulate chromium concentrations were measured to apportion both loads. This study has demonstrated that the impoundment reservoir retains not only particulate but also a dissolved form of chromium and its efficiency reaches 74–94 %. Sampling results proved that chromium contamination in the investigated river is variable and discontinuous. Discrete sampling can lead to an underestimation of chromium contamination level (up to 78 %), especially when illegal/unexpected discharges occur in the watershed. A discrete sampling regime also produces less reliable data for contaminant budget calculations, especially in sites where strong variability of contamination is anticipated, while at the output from reservoirs, the load can be reasonably estimated using this mode of sampling.     

The need for ecocentrism in biodiversity conservation

Over the past 5 decades, scientists have been documenting negative anthropogenic environmental change, expressing increasing alarm, and urging dramatic socioecological transformation in response. A host of international meetings have been held, but the erosion of biological diversity continues to accelerate. Why, then, has no effective political action been taken? We contend that part of the answer may lie in the anthropocentric ethical premises and moral rhetoric typically deployed in the cause of conservation. We further argue that it is essential to advance moral arguments for biodiversity conservation that are not just based on perceived human interests but on ecocentric values, namely, convictions that species and ecosystems have value and interests that should be respected regardless of whether they serve human needs and aspirations. A broader array of moral rationales for biodiversity conservation, we conclude, would be more likely to lead to effective plans, adopted and enforced by governments, designed to conserve biological diversity. A good place to start in this regard would be to explicitly incorporate ecocentric values into the recommendations that will be made at the conclusion of the 15th meeting of the parties to the Convention on Biological Diversity, scheduled to be held in October 2020.     

Calibration of the Chemcatcher passive sampler for the monitoring of priority organic pollutants in water

An integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low-density polyethylene diffusion membrane was calibrated for the measurement of time-weighted average concentrations of hydrophobic micropollutants, including polyaromatic hydrocarbons and organochlorine pesticides, in water. The effect of temperature and water turbulence on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water was studied in a flow-through system under controlled conditions. It was found that the absorption of test analytes from water to the sampler is related to their desorption to water. This allows for the in situ calibration of the uptake of pollutants using offload kinetics of performance reference compounds. The sampling kinetics are dependent on temperature, and for most of the tested analytes also on the flow velocity. Sampler-water partition coefficients did not significantly change with temperature.