Distribution and Statistical Analysis of Leachable and Total Heavy Metals in the Sediments of the Suez Gulf

The concentrations of nine heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pd and Zn) in the labile and total fractions of muddy and sandy sediment samples collected from twelve sites in Suez Gulf during April 1999 were studied to evaluate the pollution status of the Suez Gulf. The enrichment factors (EF) for each element were calculated. There are extremely high concentrations of Cd, Ni, Pb and slightly concentration of Cr and Cu in both muddy and sandy sediments. The concentration of Zn was moderately high and can be considered as seriously contaminate Metal pollution index (MPI) shows high values ranged between 46 to 156 and 40 to 232 for both sandy and muddy sediments, respectively. Concentrations of heavy metals were normalized against iron for total fraction in both of sandy and muddy sediments. Principal component analysis (PCA) was studied on the data matrix obtained and represented three-factor model explaining 92.22% for labile and 88.82% for total fractions of muddy sediment. The main source of contamination is the offshore oil fields and industrial wastes. This is largely a result of ineffective and inefficient operation equipment, illegal discharge of dirty ballast water from tankers and lack of supervision and prosecution of offenders.     

Biogenic sulphide plays a major role on the riboflavin-mediated decolourisation of azo dyes under sulphate-reducing conditions

The effect of high concentrations of sulphate on the reductive decolourisation of different azo dyes by anaerobic sludge was studied in batch cultures. Sludge cultures were pre-incubated under sulphate-reducing conditions prior addition of dyes. Little or no effects of sulphate (5-10 g sulphate l(-1)) on the rate of decolourisation of Reactive Orange 14 (RO14), Direct Blue 53 (DB53) and Direct Blue 71 (DB71) were observed when no external redox mediator was provided. However, an increase in sulphate concentration, in the presence of riboflavin (20 microM), enhanced the decolourisation of all dyes. The first-rate constant of decolourisation (k) was increased up to 2-, 3.6- and 2-fold for RO14, DB53 and DB71, respectively, by supplying high sulphate concentrations, compared to the controls lacking sulphate, in the presence of the redox mediator. Sulphate reduction did not take place during the course of azo reductions, but was only evident before dye addition and after complete decolourisation, suggesting azo dyes reduction out-competed sulphate reduction for the available reducing equivalents. The experimental data suggest that reduction of azo dyes by riboflavin, which had been reduced by biogenic sulphide, was the major mechanism implicated during decolourisations, which was corroborated by abiotic incubations. Riboflavin greatly accelerated the abiotic reduction of RO14, so that the k value was increased up to 44-fold compared to the control lacking riboflavin.     

Sucrose amendment enhances phytoaccumulation of the herbicide atrazine in Arabidopsis thaliana

Growth in the presence of sucrose was shown to confer to Arabidopsis thaliana (thale cress or mustard weed) seedlings, under conditions of in vitro culture, a high level of tolerance to the herbicide atrazine and to other photosynthesis inhibitors. This tolerance was associated with root-to-shoot transfer and accumulation of atrazine in shoots, which resulted in significant decrease of herbicide levels in the growth medium. In soil microcosms, application of exogenous sucrose was found to confer tolerance and capacity to accumulate atrazine in Arabidopsis thaliana plants grown on atrazine-contaminated soil, and resulted in enhanced decontamination of the soil. Application of sucrose to plants grown on herbicide-polluted soil, which increases plant tolerance and xenobiotic absorption, thus appears to be potentially useful for phytoremediation.     

Freight transport and non-driving work duties as predictors of falling asleep at the wheel in urban areas of Crete

BACKGROUND: This study investigated the impact of subjective reports of drowsy driving and non-driving duties on the falling asleep responses and road crash involvement of professional drivers in Crete. An attempt was also made to elucidate other driving parameters, such as freight transportation, which could be potential predictors of risky driving, after controlling for lifestyle patterns. METHOD: A sample of 317 professional drivers was studied through personal interviews. The interview questionnaire included items about sleep and fatigue as contributing factors to falling asleep probability and crash risk. In addition, the drivers reported the type of freight they carried in their last trip, as well as practices such as smoking and alcohol consumption. RESULTS: The first logistic regression analysis showed that the most significant predictors of falling asleep at the wheel were transportation of fruits/vegetables and livestock, non-driving hours of work, insufficient hours of sleep, and smoking. The second logistic regression analysis revealed all the previous items as powerful factors of crash probability, including the transportation of express freight and freezer. IMPACT: The findings of the current study are discussed as they pertain to directions for future studies and for the development of fatigue countermeasures.     

Use of cement dust in the manufacture of vitrified sewer pipes

Waste by-pass cement dust was added in different percentages ranging from 2% to 10% to a standard mix for sewer pipes manufacture, as a substitute for expensive feldspar. It was found that a mix consisting of 45% kaolin, 36% ball clay, 9% grog and 10% by-pass dust and fired at a temperature of 1300 degrees C for 4 h yielded samples that meet the standards. It was possible to reach a water absorption of 4%, a modulus of rupture of 7.8 MPa and a resistance to acids and alkalis conforming with standard values. A test pipe was fabricated by vacuum extrusion using the suggested composition and was found to withstand a hydraulic pressure of 14 MPa for one minute without the appearance of any cracks.     

Element mobility during metasomatism of granitic rocks in the Saint-Chély d'Apcher area (Lozère,France)

This paper summarises the behaviour of major and trace elements during hydrothermal alteration processes in the Vareilles albite deposit, Saint-Chély d' Apcher area (Lozère, France). Sampling focused mainly on fine- to medium-grained two-mica granite facies surrounding albitite veins in two open pits. The primary chemical variability inherent in sampling parent rock and analytical uncertainties can seriously affect element mobility calculations. Here we present a simple model that allows to discriminate between magmatic and alteration effects and to make a proper evaluation of the chemical changes that have caused the alteration. For this reason, a range of unaltered granites and albitites were sampled to evaluate the degree of parent rock heterogeneity. Duplicate measurements were performed by epithermal neutron activation analysis (ENAA) to obtain a reliable mean concentration for trace elements and to evaluate results reproducibility. ENAA measurements are completed by analysis of major elements by inductively coupled plasma-mass spectrometry (ICP-MS). The enrichment or depletion of an element during alteration, relative to its concentration in fresh parent rock, can be calculated on the basis of the assumed immobility of some elements during the process. In this study, we have assumed Ta as immobile element on the basis for his inert behaviour. The distinct differences in chemical change between altered and unaltered granite suggest the need to consider alteration event as an important parameter in evaluating granitic rocks for nuclear waste disposal.     

Assessment of mammal reproduction for hunting sustainability through community‐based sampling of species in the wild

Wildlife subsistence hunting is a major source of protein for tropical rural populations and a prominent conservation issue. The intrinsic rate of natural increase. (r_max) of populations is a key reproductive parameter in the most used assessments of hunting sustainability. However, researchers face severe difficulties in obtaining reproductive data in the wild, so these assessments often rely on classic reproductive rates calculated mostly from studies of captive animals conducted 30 years ago. The result is a flaw in almost 50% of studies, which hampers management decision making. We conducted a 15‐year study in the Amazon in which we used reproductive data from the genitalia of 950 hunted female mammals. Genitalia were collected by local hunters. We examined tissue from these samples to estimate birthrates for wild populations of the 10 most hunted mammals. We compared our estimates with classic measures and considered the utility of the use of r_max in sustainability assessments. For woolly monkey (Lagothrix poeppigii) and tapir (Tapirus terrestris), wild birthrates were similar to those from captive populations, whereas birthrates for other ungulates and lowland‐paca (Cuniculus paca) were significantly lower than previous estimates. Conversely, for capuchin monkeys (Sapajus macrocephalus), agoutis (Dasyprocta sp.), and coatis (Nasua nasua), our calculated reproductive rates greatly exceeded often‐used values. Researchers could keep applying classic measures compatible with our estimates, but for other species previous estimates of r_max may not be appropriate. We suggest that data from local studies be used to set hunting quotas. Our maximum rates of population growth in the wild correlated with body weight, which suggests that our method is consistent and reliable. Integration of this method into community‐based wildlife management and the training of local hunters to record pregnancies in hunted animals could efficiently generate useful information of life histories of wild species and thus improve management of natural resources.     

Quinoa value chain,adoption, and market assessment in Morocco

Environmental Science and Pollution Research - Agriculture faces many challenges such as climate change, droughts, and salinity, which requires urgent interventions for fast adaptation and...     

Two leaks detection in viscoelastic pipeline systems by means of transient

This paper presents a technique for detecting and locating leaks in a single viscoelastic pipe, by means of transient analysis. The system studied is a reservoir-pipe-valve structure. The viscoelastic behavior of the pipe wall material is modeled by a generalized KelvinVoigt model. To determine the leak location, the mathematical formulation has been solved by the method of characteristics. The approach by the method of characteristics is often chosen because it is based on the concept of acoustic wave propagation which is the main mechanism of all transient events considered. The presence of the two leaks in a pipe partially reflects pressure waves initiated by the sudden closure of a downstream shut-off valve. These waves affect the shape and the amplitude of the time-history-pressure. The computed results describe the influence of the presence of two leaks on pressure time-history and the effect of leaks locations and sizes on the pressure signal behavior. The effect of the pipe wall viscoelasticity on the two leaks detection and sizing is also discussed. The leaks discharges are determined by resolving two independent equations derived from literatures and based on transient analysis. The friction and leaks depths effects on two leaks locations and sizing are involved.     

Mass-transfer processes of chromium(VI) adsorption onto guava seeds

The chromium(VI) biosorption onto guava seeds, as an alternative method for Cr⁶⁺ removal from aqueous solutions, was investigated. The parameters affecting kinetics and equilibrium of Cr⁶⁺ adsorption onto guava seeds were studied. An external mass-transfer diffusion coefficient k and intra-particle diffusion coefficient k_i were determined to measure the rate-limiting step of adsorption. A single external mass-transfer diffusion model and intra-particle diffusion models were used. The effects of initial pH, sorbent mass, and initial Cr⁶⁺ concentrations on mass-transfer coefficients were investigated. The external mass-transfer coefficient has an average value of 7.2×10^-3 cm s^-1, while the intra-particle mass-transfer diffusion coefficient was 0.34 mg g^-1 min^-0.5. This indicates that external diffusion to the guava seeds surface and intra-particle diffusion are both involved in the sorption process. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models with an average correlation coefficient R²=0.98. The maximum removal of Cr⁶⁺ was obtained at pH 1 (about 100% for adsorbent dose of 15 g l^-1 and 25 mg l^-1 initial concentration of Cr⁶⁺). The results indicated that the guava seeds exhibit acceptable sorption capacity.